MVC-Data AccessZone GC501 User Manual page 19

AccessZone ® - GC500 Series – GC501-GC504 User Manual
<Re-trig door remain open>
(optional – not required)
Total length = 15 digits
Examples:
To activate the door mechanism for 5 s with 1 s warning
buzzer on open/close, door type is level, enable light
control function for the first 5 user enter: "05,01,1,1,05,10"
To activate the gate mechanism for 15 s with 2 s warning
buzzer on open/close, door type is pulse, enable alarm
bypass function for the first 10 user enter and re-trig of
door remain open time: "15,02,0,0,10,10,1"
The system settings can be reset to factory value. Please
see section 15 Default Factory System Settings
System administrator should maintain a system log with
changed System Settings for Normal Operation Mode.
Please see 18 Appendix C – System Configuration Log
Template
1)
In radio noise environments (e.g. many Bluetooth devices/Wifi access point) it is recommended
to use a <door remain open time> value above 10 seconds or more. I.e. it cannot be guarantied
that the device always can be detected again with the <door remain open time> period.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
1 digit
0-1
or optional 17 digits
Re-trigs the door/gate remain open time if the
user is detected again with the door/gate is
open. I.e. the open time period is extended as
long as the user is detected.
'0' = Disable re-trig of door/gate open time
'1' = Enable re-trig of door/gate open time
Default: '0'
www.mvc-data.com E-mail info@mvc-data.com
1)
2010-07-06 US 1.17
19/34
Phone +45 25 12 84 02