AccessZone ® - GC500 Series – GC501-GC504 User Manual
8.3
Delete User Command
This command deletes a user from the system.
This command can also be execute in normal mode by the privileged users (administrators) on
storage position 01 and 02 if access PIN code is enabled.
Parameters
<Delete storage position>
Total length = 2 digits
Examples:
Delete privileged user (administrator) stored on position 1
enter: "01"
Delete normal user stored on position 5 enter: "05"
Note!
An exiting user can also be deleted by adding a new user on
the same storage position (reuse). I.e. it is not necessary to
use the delete command first.
All information is subject to change without notice. All other products and brand names are registered trademarks of their respective companies
Copyright © 2005-2010 All rights reserved MVC-Data ApS Skalhuse 5 9240 Nibe Denmark Web
Values
Description
User position to delete from system database
2 digits
01-02
Privileged users (administrators): "01"-"02"
03-07
Normal users GC501: "03"-"07"
03-12
Normal users GC502: "03"-"12"
03-22
Normal users GC503: "03"-"22"
03-52
Normal users GC504: "03"-"52"
Ex. position 1 = "01", 8 = "08" and 10="10"
www.mvc-data.com
E-mail
info@mvc-data.com
Phone +45 25 12 84 02
2010-07-06 US 1.17
17/34
Need help?
Do you have a question about the AccessZone GC501 and is the answer not in the manual?