US Water Systems Fusion Owner's Manual page 7

7
3. Place a piece of duct tape over the distributor tube so no gravel or media enters the
opening while filling.
4. Use the Blue Funnel provided, to pour the RESIN in the tank. Pour resin evenly around
the hole to ensure it is well distributed in the tank. Pour it slow enough, to prevent the
funnel from plugging. A helper may be needed to hold the funnel during the filling pro-
cess. It is recommended that a dust mask and safety goggles be worn to prevent possi-
ble injury. A shop vacuum can be held in the area to help control the dust created by the
filling process. Pour all the resin that was shipped in the tank. US Water Systems
DOES NOT ship extra resin.
5. When the resin is installed move tank side to side to settle the media. Remove the fun-
nel and tape from the distributor tube. It is a good practice to fill the tank with water and
allow the media to saturate.
Installation, Operation and Maintenance Manual