Utilities/Copy - Iwatsu DS-8814 Operation Manual

Copy (COPY)
A lso see Section 1 "Copy function" (page 24), "Built-in printer" (page 25) and
"UTILITIES menu" (page 40) together.
Outputs a hardcopy of the screen and panel setting to the built-in printer,
floppy disk, ATA card and Centronics port.
Source
(SOURCE)
Device
Built-in printer
(DEVICE)
Output type
(TYPE)
Panel setting
When Source is set to Panel, the panel setting information can be
information
output. At this time, the panel setting information is output as 2-
copy
screen data. When the output device is set to either Floppy or ATA
Card, two files are created with one copy operation.
Function
If the device is Floppy or ATA Card, select the function Copy/Delete.
setting To execute the function, specify File No.
＼ ＼ ＼ ＼ ＼
Executing a copy by pressing the Copy button creates the above directory
under the root of the specified device and saves the file with specified
file No.
At this time, File No. is automatically incremented by 1.
Executing Delete detects the existing files from each directory under
the root of the specified device and deletes specified file No.
When Screen is selected
Printer
Fixed
TIFF: Saves/deletes TIFF format screen or panel setting.
The file extension is TIF.
BMP: Saves/deletes BMP format screen or panel setting.
The file extension is BMP.
Hard copy of
screen
Floppy
ATA
Floppy ATA Card
Select TIFF and BMP.
When Panel is selected
73
Panel
setting