Table of Contents
Advertisement
8
How to read screen
① ① ① ① ① Waveform display area
Displays a waveform and scale.
At the left end of the screen, the GND
reference markers of CH1 to CH4
waveforms are displayed as markers 1 to
4, respectively. Additionally, the trigger
level is displayed as marker T.
② ② ② ② ② Horizontal axis and acquisition display
area
a
b
c
200ns 400MS/s Run D:-99.0ns Smpl Equ S/L
a: Timebase Time/div
b: Sampling rate
c: Run/Stop state
d: Delay time
e: Acquisition mode
f: Roll/equal sampling
g: Memory Length Short/long
When persistence is on, displayed in
reverse video.
③ ③ ③ ③ ③ Menu display area
Displays the selected menu.
Displays a cursor measuring item during
cursor measurement and displays a
interface menu during remote control.
d
e
f
g
④ ④ ④ ④ ④ Vertical axis/trigger display area
h
i
j
1 200mV + 2 200mV
h: Trace ON/OFF (when ON, displayed
in reverse video)
i: VOLTS/div
j: Operation setting
(addition (Add) = +,
subtraction (Sub) = –,
multiplication (Mult) = ×)
k: Sweep mode
l: Trigger source
m: Trigger slope/trigger coupling
n: Trigger level
⑤ ⑤ ⑤ ⑤ ⑤ Message status display area
Displays a selected status, temporary
message or alarm.
The selected menu to the right is displayed
in reverse video.
Displays 'Remote' during remote control.
k
l
3 200mV 4 200mV Aut 2 +HF -99.9mV
m
n
Advertisement
Table of Contents
