Table of Contents
Advertisement
36
SAVE/RECALL menu
SAVE/
Saves and recalls SETUP (panel setting) and WAVEFORM (waveform
RECALL
data) to a floppy disk or ATA card. The CH1, CH2, CH3 and CH4
waveforms are saved simultaneously. Both the panel setting and the
waveform data are recalled simultaneously.
Saves/recalls the CH1/CH2/CH3/CH4
waveforms irrespective of display ON/OFF.
Binary ASCII
can be selected
as data format.
Device
Selects a floppy disk or ATA card. (When a device is selected, the free
setting
capacity of the selected device is checked, and then it is displayed.)
Type
Selects Setup (panel setting) or Waveform (waveform data).
setting
Note: Select the Style (next item) when selecting the waveform.
Style
Selects Binary or ASCII. The Style of the panel settings is Binary format.
setting
Note: There is a setting item at the end of the Save/Recall menu.
Function
Selects Save, Recall or Delete.
Execute the function by specifying file No.
The above directory is automatically created when save is executed, and
the data is saved as the specified file number.
The selected file is found automatically from the above directory, and is
recalled or deleted when Recall or Delete is executed.
Step
When saving the waveforms (waveform data) in the ASCII format, the
setting
waveform data can be saved with it curtailed. A curtailed interval is
selected from 1, 2, 4, 8, 16, 32, 64, and 128. If Step is set to 1, all of the
waveform data can be saved.
Example: Head♦◊◊◊♦◊◊◊♦◊◊◊♦◊◊◊...........◊◊♦◊◊◊Tail
Setup:
Saves, recalls or deletes panel settings in Binary
format.
The file extension is set.
WAVE:
Saves, recalls or deletes waveform data in Binary
format.
The file extension is wfm.
ASCII:
Saves or deletes waveform data in ASCII format.
The file extension is csv.
Specify 4, and the ♦s above will be saved.
Saves/recalls part of the readout
and menu. (For save content,
see the appendix 4.)
Advertisement
Table of Contents
