Before Starting The Measurement; Contrast Setting, Selection Of Language, Help Function, Setting Of Date - Iwatsu DS-8814 Operation Manual

10

Before starting the measurement

Make the following adjustments if necessary.
Contrast setting
Adjusts the contrast of the screen.
The contrast is automatically set initially when the power is turned on. You may adjust
the contrast manually if necessary.
This manually-adjusted condition is maintained until the power is turned off.
1. Press the DISPLAY button to show the Display menu.
2. Adjust Contrast between 0 and 100% with [FUNCTION operation] to get the
appropriate screen brightness.
Selection of language
Selects the HELP language.
1. Select Config in the UTILITIES menu with [FUNCTION operation].
2. Press the FUNCTION knob to show the Config menu.
3. Select Language in the Language menu with [FUNCTION operation].
HELP function
Press the HELP button at the top left. An explanation of the last operated function
is displayed.
HELP is canceled by any operation.
Setting of date
The date is used for time display but also for the time stamp when saving a file and
capturing a waveform.
1. Select Date in the UTILITIES menu with [FUNCTION operation].
2. Press the FUNCTION knob to show the Date menu.
3. Select Month from 1 to 12 with [FUNCTION operation].
Set Day, Year, Hour and Minute in the same way.
The seconds are set to zero when fixing the date menu.