Type Of Cursor Measurement - Iwatsu DS-8814 Operation Manual

[Example] ∆ ∆ ∆ ∆ ∆ V&∆ ∆ ∆ ∆ ∆ t12 measurement
V-C1
H-C1
V-C2

Type of cursor measurement

Measurement type Description
∆V
∆t, 1/∆t
∆V&∆t12
∆V&∆t34
V at t
V at t measurement
Using H cursors for other than cursor measurement
Use of the MEASURE function allows automatic measurement of the amplitude
of waveform, period and other 17 measurement items. (See Section 2.)
The H cursors are also used to specify the measurement area of automatic
measurement.
Δ V
H-C2
Δ t
Voltage difference between V cursors
Time difference between H cursors and 1/∆t
Voltage difference between V cursors (CH1, CH2) V-C1, V-C2
Time difference between H cursors and 1/∆t
Voltage difference between V cursors (CH3, CH4) V-C1, V-C2
Time difference between H cursors and 1/∆t
Voltage at point that crosses H cursor
Time difference between trigger point to H cursor
→ Measurement item currently selected
→ Cursor that can be operated by FUNCTION
knob
→ ∆V measurement result at CH1 voltage sensitivity
(When trace is OFF, *** is displayed)
→ ∆V measurement result at CH2 voltage sensitivity
→ Period ∆t measurement
→ 1/∆t measurement
Use of V at t allows measurement
of the voltage at the point at which
waveform crosses the H cursor and
the time until the trigger point.
23
Usable cursor
V-C1, V-C2
H-C1, H-C2
H-C1, H-C2
H-C1, H-C2
H-C1