Table of Contents
Advertisement
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Booster and double Booster function
Booster [ P ] and double Booster [
If this function is activated the heating zones work during 10 minutes with an ultra high Power.
This is foreseen for example to heat up rapidly big quantities of water, like pasta.
•
Start-up / Stop the Booster:
Action
Start up the Booster
Stop the Booster
•
Start up / Stop double Booster
Action
Start up the Booster
Start up double Booster
Stop the double Booster
Stop Booster
•
Power management:
The hole cooking hob is equipped with a maximum of Power. When the Power function is
activated, and in order to exceed the maximum Booster, the electronic system orders to reduce
automatically the power level of an other heating zone. The display is blinking on [ 9 ] during a
few seconds and then shows the maximum of power allowed:
Heating zone selected
[ P ] is displayed
] grant a boost of Power to the selected heating zone.
Control panel
slide to the end of the "SLIDER"
or press directly on the end of
the "SLIDER"
slide on the "SLIDER"
Control panel
slide to the end of the "SLIDER"
or press directly on the end of
the "SLIDER"
re-press directly on the end of
the "SLIDER"
slide on the "SLIDER"
slide on the "SLIDER"
The other heating zone:
[ 9 ] goes to [ 6 ] or [ 8 ] depending the type of zone
11
Display
[ P ]
[ 9 ] to [ 0 ]
Display
[ P ]
[
[ P ] to [ 0 ]
[ 9 ] to [ 0 ]
(example: Booster level 9)
and P ]
Advertisement
Table of Contents
