Table of Contents
Advertisement
Pan detection
The pan detection feature ensures safety. The induction doesn't work:
• If there is no pan on the heating zone or if the pan is not adapted to the induction. In this
case, it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.
Residual heat indication
After a heating zone or the entire hob is switched off, the heating zones are still hot and indicate
[ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicator light is on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Starting-up
•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 seconds, the electronics returns to waiting position.
Control panel
Press key [
]
Press key [
]
Control panel
Press [ 0 ] of the selected zone
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
12
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ] and control light
on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Advertisement
Table of Contents
