Table of Contents
Advertisement
STARTING-UP AND APPLIANCE MANAGEMENT
Before Using Your New Ceramic Hob
Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent,
as this risks causing blue-tinted colour on the glass surface.
Touch Control
Your induction hob is equipped with electronic controls with touch control keys. When your
finger presses the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a "beep" sound.
For general use, ensure only one button is pressed at any time
Residual heat indication
After a heating zone or the entire hob is switched off, the heating zones are still hot and indicate
[ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicator light is on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Starting-up
Start-up/ switch off the hob
Action
To start
To stop
Start-up/ switch off a heating zone
Action
Increase power
Decrease power
Stop
Extension zone
Action
Zone select
Switch off
Switch on
Control panel
Touch key [
]
Touch key [
]
Control panel
Touch key [ + ]
Touch key [ - ]
Touch simultaneous [ + ] and [ - ]
Control panel
Touch key [ + ]
Touch key [ ]
Touch key [ ]
11
Display
[ 0 ]
Nothing or [ H ]
Display
[ 4 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]
Display
Control light is blinking
Extension zone light is off
Extension zone light is on
Advertisement
Table of Contents
