Starting-Up; Pan Detection; Residual Heat Indication; Booster Function (Only Induction) - Caple C896IBK Instruction Manual

Starting-up


Start up / switch off the hob:
Action
To start
To stop

Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.

Pan detection

The pan detection ensures a perfect safety. The induction doesn't work:
 If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
 If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.

Residual heat indication

After switching off a heating zone, the heating zones are still hot and will indicate [ H ] on the
display.
The symbol [ H ] disappears when the heating zones have cooled and may be touched without
danger.
When the residual heat indicators are on, don't touch the heating zones and don't put any heat
sensitive object on them. There are risks of burn and fire.

Booster function (only induction)

The Booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
Booster is foreseen for example to heat up rapidly big quantities of water,
 Start up / Stop the booster Power function:
Action
Zone selection
Start up the Booster
Stop the Booster
Control panel
Press key [ ]
Press key [ ]
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
to the right or to the left
Slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
Control panel
Press on the "SLIDER"
across from the desired zone
Slide on the "SLIDER"
Slide on the "SLIDER"
Display
[ 0 ] are blinking
Nothing or [ H ]
Display
[ 0 ] and control
light on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Display
[ 0 ] and control
light on
[ 0 ] to [ P ]
[ P ] to [ 0 ]