Advertisement

Quick Links

Instruction manual for ceramic hob
Model code: C807C
Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk

Advertisement

Table of Contents
loading

Summary of Contents for Caple C807C

  • Page 1 Instruction manual for ceramic hob Model code: C807C Contact Caple on 0117 938 7420 or for spare parts www.caple.co.uk...
  • Page 2 This appliance is intended for household use only and not for similar applications such as: -staff kitchen areas in shops, offices and other working environments; -farm houses; -by clients in hotels, motels and other residential type environments; -bed and breakfast type environments. This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have...
  • Page 3: Product Overview

    Congratulations on the purchase of your new Ceramic Hob. We recommend that you spend some time reading this Instruction / Installation Manual in order to fully understand how to instal and operate it correctly For installation, please read the installation section. Read all the safety instructions carefully before use and keep this Instruction / Installation Manual for future reference.
  • Page 4: Product Information

    Product Information This ceramic hob can meet different kinds of cuisine demands because of resistance wire heating, really the optimal choice for modern families. Working Principle This ceramic hob directly employs resistance wire heating, and adjust the output power by the power regulation with the mechanical controls. Before using your New Ceramic Hob •...
  • Page 5: Choosing The Right Cookware

    Choosing the right Cookware Do not use cookware with jagged edges or a curved base. Make sure that the base of your pan is smooth, sits flat against the glass, and is the same size as the cooking zone. Always centre your pan on the cooking zone. Always lift pans off the ceramic hob –...
  • Page 6: Using Your Ceramic Hob

    Using your Ceramic Hob To start cooking 1. Place a suitable pan on the cooking zone that you wish to use. • Make sure the bottom of the pan and the surface Of the cooking zone are clean and dry. 2.
  • Page 7: Cooking Guidelines

    Cooking Guidelines Take care when frying as the oil and fat heat up very quickly, particularly if you’re using PowerBoost. At extremely high termperatures oil and fat will ignite spontaneously and this presents a serious fire risk. Cooking Tips • When food comes to the boil, reduce the temperature setting. •...
  • Page 8: Care And Cleaning

    1. Choose a compatible flat-based wok or a large frying pan. 2. Have all the ingredients and equipment ready. Stir-frying should be quick. If cooking large quantities, cook the food in several smaller batches. 3. Preheat the pan briefly and add two tablespoons of oil. 4.
  • Page 9: Hints And Tips

    See ‘Care and cleaning’. cleaning products being used. Please do not disassemble the unit by yourself to avoid any dangers and damages to the ceramic hob. Technical Specification Cooking Hob C807C Cooking Zones 4 zones Supply Voltage 220-240V~ Installed Electric Power...
  • Page 10 Cut out the work surface according to the sizes shown in the drawing. For the purpose of installation and use, a minimum of 5 cm space shall be preserved around the hole. Be sure the thickness of the work surface is at least 30mm. Please select heat-resistant work surface material to avoid larger deformation caused by the heat radiation from the hotplate.
  • Page 11: Before Locating The Fixing Brackets

    Before locating the fixing brackets The unit should be placed on a stable, smooth surface (use the packaging). Do not apply force onto the controls protruding from the hob. Fix the hob on the work surface by screw four brackets on the bottom of hob (see picture) after installation.
  • Page 12: Connecting The Hob To The Mains Power Supply

    6. A steam cleaner is not to be used. Connecting the hob to the mains power supply The power supply should be connected in compliance with the relevant standard,or a single-pole circuit breaker.the method of connection is shown below. 1. If the cable is damaged or needs replacing, this should be done by an after-sales technician using the proper tools, so as to avoid any accidents.
  • Page 13: Safety Warnings

    Safety Warnings Your safety is important to us. Please read this information before using your cooktop. Installation Electrical Shock Hazard • Disconnect the appliance from the mains electricity supply before carrying • out any work or maintenance on it. • Connection to a good earth wiring system is essential and mandatory. •...
  • Page 14 must consult with their doctor or implant manufacturer before using this appliance to make sure that their implants will not be affected by the electromagnetic field. • Failure to follow this advice may result in death. Hot Surface Hazard • During use, accessible parts of this appliance will become hot enough to cause burns. •...
  • Page 15 can scratch the glass. • Do not use scourers or any other harsh abrasive cl eaning agents to clean your hob , as these can scratch the ceramic glass. • If the power supply cable is damaged, it must only be replaced by a qualified technician. •...
  • Page 16 Caple Fourth Way Avonmouth Bristol BS11 8DW www.caple.co.uk...

Table of Contents