Table of Contents
Advertisement
Power selection zone "SLIDER" and timer setting zone
To select the power with the slider, slide your finger on the "SLIDER" zone. You can also select
the power by placing your finger directly on the chosen level.
Pan detection
The pan detection feature ensures safety. The induction doesn't work:
• If there is no pan on the heating zone or if the pan is not adapted to the induction. In this
case, it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don't let the pan detection [ U ] active.
Residual heat indication
After a heating zone or the entire hob is switched off, the heating zones are still hot and indicate
[ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
While the residual heat indicator light is on, don't touch the heating zones and don't put any
heat sensitive object on them. There are risks of burn and fire.
Starting-up
•
Start / switch off the hob:
Action
To start
To stop
•
Start / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 seconds the electronics will return to standby mode.
Power selection zone "slider" and
timer setting zone
Slider
Control panel
Press key [
Press key [
Control panel
Press display [ 0 ] selected
Slide on the "Slider"
to the right or to the left
Slide to [ 0 ] on "Slider"
]
]
11
Direct access
Display
[ 0 ]
Nothing or [ H ]
Display
[ 0 ] and control light
are on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
Advertisement
Table of Contents
