Table of Contents
Advertisement
Starting-up
•
Start up / switch off the hob:
Action
To start
To stop
•
Start up / switch off a heating zone:
Action
Zone selection
To set
(adjust the power)
To stop
If no action is made within 20 second the electronics returns in waiting position.
Pan detection
The pan detection ensures a perfect safety. The induction doesn't work:
• If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows [ U
]. The symbol [ U ] disappears when the pan is put back to the heating zone. The cooking
continues with the power level set before.
After use, make sure that the heating elements have been switched off: don't leave the pan
detection [ U ] active.
Residual heat indication
After the switch off of a heating zone or the complete stop of the hob, the heating zones are still
hot and indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones may be touched without danger.
As far as the residual heat indicators are on light, don't touch the heating zones and don't put any
heat sensitive objects on them. There are risks of burn and fire.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra high power.
The booster is foreseen to rapidly heat up big quantities of water, for example when cooking
pasta.
•
Start up / Stop the booster function:
Action
Zone selection
Start up the booster
Stop the booster
Control panel
press key [
]
press key [
]
Control panel
press display [ 0 ] selected
slide on the "SLIDER"
to the right or to the left
slide to [ 0 ] on "SLIDER"
or press on [ 0 ]
Control panel
press key [ 0 ] from the zone
press key [
]
slide on the "SLIDER"
or press on [ P ]
9
Display
[ 0 ] are blinking
nothing or [ H ]
Display
[ 0 ] and control light on
[ 0 ] to [ 9 ]
[ 0 ] or [ H ]
[ 0 ] or [ H ]
Display Zone
[ 0 ] and control light on
[ P ]
[ P ] to [ 0 ]
[ 9 ]
Advertisement
Table of Contents
