Table of Contents
Advertisement
To set the IP address manually, please choose Any
Address/Single Address/Range Address/Subnet Address as
the Address Type and type them in this dialog. In addition, if
you want to use the IP range from defined groups or objects,
please choose Group and Objects as the Address Type.
From the IP Group drop down list, choose the one that you
want to apply. Or use the IP Object drop down list to choose
the object that you want.
Service Type
Click Edit to access into the following dialog to choose a
suitable service type.
To set the service type manually, please choose User
defined as the Service Type and type them in this dialog. In
addition, if you want to use the service type from defined
groups or objects, please choose Group and Objects as the
Service Type.
Protocol - Specify the protocol(s) which this filter rule will
apply to.
Source/Destination Port –
(=) – when the first and last value are the same, it indicates
one port; when the first and last values are different, it
Vigor3220 Series User's Guide
293
Advertisement
Table of Contents
