Table of Contents
Advertisement
MAC Address
Start IP Address
End IP Address
Subnet Mask
Invert Selection
4.
After finishing all the settings here, please click OK to save the configuration. Below is
an example of IP objects settings.
478
Select Mac Address if this object contains Mac address.
Type the MAC address of the network card which will be
controlled.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is
selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
