Table of Contents
Advertisement
6.
At General tab, you may alter the Switch Name displayed in the Profile List, give
comments, or change the login password.
7.
Go to VLAN tab to set up VLAN port members.
a. On the top it shows the Router's VLAN setting for reference, the LAN Port that
b. And below shows the VLAN available according to the router's VLAN settings. In
c. For the rest of the ports, select the VLAN to which they should belong. If a port
The above configuration implies that the clients on switch's port 3-8 will belong to LAN 1,
on port 9-16 will belong to LAN2, and on port 17-24 will belong to LAN3.
Vigor3220 Series User's Guide
marked gray is the router's LAN port that connects to the switch.
this example, router's LAN port 3 is a member for VLAN0, VLAN1, VLAN2, and
VLAN3; therefore, there are four VLANs available for the switch's VLAN setup. The
port that connects to the router will be marked gray and automatically selected to
be a member of every VLAN.
belongs to more than one tagged VLAN, you may manually define the PVID.
469
Advertisement
Table of Contents
