Page 2 Vigor3220 Series Multi-WAN Security Firewall User’s Guide Version: 3.2 Firmware Version: V3.8.2 (For future update, please visit DrayTek web site) Date: November 23, 2015 Vigor3220 Series User’s Guide...
Page 3 Web registration is preferred. You can register your Vigor router via http://www.DrayTek.com. Firmware & Tools Updates  Due to the continuous evolution of DrayTek technology, all routers will be regularly upgraded. Please consult the DrayTek web site for more information on newest firmware, tools and documents. http://www.DrayTek.com...
Page 4 Product: Vigor3220 Series Router DrayTek Corp. declares that Vigor3220 Series of routers are in compliance with the following essential requirements and other relevant provisions of R&TTE 1999/5/EC, ErP 2009/125/EC and RoHS 2011/65/EU. The product conforms to the requirements of Electro-Magnetic Compatibility (EMC) Directive 2004/108/EC by complying with the requirements set forth in EN55022/Class A and EN55024/Class A.
Page 5: Table Of Contents
II-1-2-10 Details Page for IPv6 – DHCPv6 Client in Ethernet WAN ......67 II-1-2-11 Details Page for IPv6 – Static IPv6 in Ethernet WAN ......68 II-1-2-12 Details Page for IPv6 – 6in4 Static Tunnel in Ethernet WAN ....69 Vigor3220 Series User’s Guide...
Page 6 II-4-9 SMS / Mail Alert Service....................146 II-4-10 Bonjour ......................... 148 II-4-11 High Availability ......................151 II-4-11-1 General Setup ................. 152 II-4-11-2 Config Sync ................154 Application Notes ........................156 A-1 How to Implement the LDAP/AD Authentication for User Management? ..156 Vigor3220 Series User’s Guide...
Page 7 IV-1-9 VPN Trunk Management ....................237 IV-1-10 Connection Management.................... 246 Application Notes ........................248 A-1 How to Build a LAN-to-LAN VPN Between Remote Office and Headquarter via IPsec Tunnel (Main Mode) ................248 IV-2 SSL VPN ..........................253 Vigor3220 Series User’s Guide...
Page 8 IV-4-4 Log & Alert ........................283 Application Notes ........................284 A-1 CVM Application - How to manage the CPE (router) through Vigor3220 Series? . 284 A-2 CVM Application - How to build the VPN between remote devices and Vigor3220 Series? ..................... 288 A-3 CVM Application - How to upgrade CPE firmware through Vigor3220 Series? ..
Page 9: Content Filter
Application Notes ........................407 A-1 How to authenticate clients via User Management ........407 A-2 How to use Landing Page Feature ............416 VI-4 Central AP Management (CAM) ..................... 421 Web User Interface ........................422 VI-4-1 Status ..........................422 Vigor3220 Series User’s Guide...
Page 10 A-1 How can I get the files from USB storage device connecting to Vigor router? ... 474 Part VIII Troubleshooting ....................477 VIII-1Diagnostics ..........................478 Web User Interface ........................479 VIII-1-1 Dial-out Triggering....................... 479 VIII-1-2 Routing Table......................480 VIII-1-3 ARP Cache Table ....................... 481 Vigor3220 Series User’s Guide...
Page 11 Appendix I: VLAN Applications on Vigor Router ................508 Part IX DrayTek Tools ....................517 IX-1 SmartVPN Client........................518 IX-1-1 DrayTek Android-based SmartVPN APP for the establishment of SSL VPN connection ..............................518 IX-1-2 How to Use SmartVPN Android APP to Establish SSL VPN Tunnel?......519 Part X Telnet Commands....................523...
Page 13: Part I Installation
This part will introduce Vigor router and guide to install the device in hardware and software. Vigor3220 Series User’s Guide...
Page 14: Introduction
Vigor3220 Series, a broadband router, integrates IP layer QoS, NAT session/bandwidth management to help users control works well with large bandwidth. By adopting hardware-based VPN platform and hardware encryption of AES/DES/3DES, the router increases the performance of VPN greatly and offers several protocols (such as IPSec/PPTP/L2TP) with up to 100 VPN tunnels.
Page 15: I-1-1 Indicators And Connectors
The port is connected with 1000Mbps. The port is connected with 10/100Mbps Left The port is connected. WAN1 The port is disconnected. ~WAN Blinking The data is transmitting. Right The port is connected with 1000Mbps. The port is connected with 10/100Mbps Vigor3220 Series User’s Guide...
Page 16 Connecter for local DMZ host. Connecters for local networked devices. WAN1~WAN4 Connecter for remote networked devices. USB1~USB2 Connecter for a USB device (for 3G/4G USB Modem or printer). Connecter for a power adapter. Power Switch. ON/OFF Vigor3220 Series User’s Guide...
Page 17: Hardware Installation
Power on the device by pressing down the power switch on the rear panel. The system starts to initiate. After completing the system test, the ACT LED will light up and start blinking. (For the detailed information of LED status, please refer to section 3. Panel Explanation) Vigor3220 Series User’s Guide...
Page 18: I-2-2 Installing Usb Printer To Vigor Router
You can install a printer onto the router for sharing printing. All the PCs connected this router can print documents via the router. The example provided here is made based on Windows 7. For other Windows system, please visit www.DrayTek.com. Before using it, please follow the steps below to configure settings for connected computers (or wireless clients).
Page 19 A dialog will appear. Click Add a local printer and click Next. In this dialog, choose Create a new port. In the field of Type of port, use the drop down list to select Standard TCP/IP Port. Then, click Next. Vigor3220 Series User’s Guide...
Page 20 In the following dialog, type 192.168.1.1 (router’s LAN IP) in the field of Hostname or IP Address and type 192.168.1.1 as the Port name. Then, click Next. Click Standard and choose Generic Network Card. Vigor3220 Series User’s Guide...
Page 21 Now, your system will ask you to choose right name of the printer that you installed onto the router. Such step can make correct driver loaded onto your PC. When you finish the selection, click Next. Type a name for the chosen printer. Click Next. Vigor3220 Series User’s Guide...
Page 22 10. Choose Do not share this printer and click Next. 11. Then, in the following dialog, click Finish. Vigor3220 Series User’s Guide...
Page 23 12. The new printer has been added and displayed under Printers and Faxes. Click the new printer icon and click Printer server properties. 13. Edit the property of the new printer you have added by clicking Configure Port. Vigor3220 Series User’s Guide...
Page 24 14. Select "LPR" on Protocol, type p1 (number 1) as Queue Name. Then click OK. Next please refer to the red rectangle for choosing the correct protocol and LPR name. Vigor3220 Series User’s Guide...
Page 25 If please visit www.draytek.com to find out the printer list. Open Support >FAQ/Application Notes; find out the link of USB>>Printer Server and click Then, click the What types of printers are compatible with Vigor router? link.
Page 26: Accessing Web Page
Please type “admin/admin” as the Username/Password and click Login. Info If you fail to access to the web configuration, please go to “Trouble Shooting” for detecting and solving your problem. Vigor3220 Series User’s Guide...
Page 27 The web page can be logged out according to the chosen condition. The default setting is Auto Logout, which means the web configuration system will logout after 5 minutes without any operation. Change the setting for your necessity. Vigor3220 Series User’s Guide...
Page 28: Changing Password
New Password and Confirm Password. Then click OK to continue. Info The maximum length of the password you can set is 23 characters. Now, the password has been changed. Next time, use the new password to access the Web user interface for this router. Vigor3220 Series User’s Guide...
Page 29 Info Even the password is changed, the Username for logging onto the web user interface is still “admin”. Vigor3220 Series User’s Guide...
Page 30: Dashboard
It will be refreshed every five seconds. When you move and click the mouse cursor on LEDs (except ACT), USB ports, DMZ, LAN, or WAN1~4, related web setting page will be open for you to configure if required. Vigor3220 Series User’s Guide...
Page 31: I-5-2 Name With A Link
For detailed information about the LED display, refer to I-1-1 LED Indicators and Connectors. A name with a link (e.g., Router Name, Current Time, WAN1~5 and etc.) below means you can click it to open the configuration page for modification. Vigor3220 Series User’s Guide...
Page 32: I-5-3 Quick Access For Common Used Menu
LAN are located on the bottom of this page. Scroll down the page to find them and use them if required. Note that there is a plus ( ) icon located on the left side of VPN/LAN. Click it to review the VPN connection(s) used presently. Vigor3220 Series User’s Guide...
Page 33: I-5-4 Gui Map
All the functions the router supports are listed with table clearly in this page. Users can click the function link to access into the setting page of the function for detailed configuration. Click the icon on the top of the main screen to display all the functions. Vigor3220 Series User’s Guide...
Page 34: I-5-5 Web Console
The functions/settings modified under Web Console also can be reviewed on the web user interface. Click the Web Console icon on the top of the main screen to open the following screen. Vigor3220 Series User’s Guide...
Page 35: I-5-6 Config Backup
System Maintenance>>Configuration Backup. Simply click the icon on the top of the main screen and a pop up dialog will appear. Click Save to store the setting. Click this icon to exit the web user interface. Vigor3220 Series User’s Guide...
Page 36: I-5-8 Online Status
Such page displays the physical connection status such as LAN connection status, WAN connection status, ADSL information, and so on. Physical Connection for IPv4 Protocol Vigor3220 Series User’s Guide...
Page 37 RX Packets-Displays the total received packets at the LAN interface. TX Bytes - Displays the speed of transmitted octets at the LAN interface. RX Bytes - Displays the speed of received octets at the LAN interface. Vigor3220 Series User’s Guide...
Page 38: I-5-8-2 Virtual Wan
Internet. Such page displays the virtual WAN connection information. Virtual WAN are used by TR-069 management, VoIP service and so on. The field of Application will list i-9the purpose of such WAN connection. Vigor3220 Series User’s Guide...
Page 39: Quick Start Wizard
WAN5. For WAN 1 to WAN4, choose Auto negotiation as the physical type for your router. Here we take WAN1 as an example. Then, click Next for next step. WAN1~ WAN4 and WAN5 will bring up different configuration page. Refer to the following sections for detailed information. Vigor3220 Series User’s Guide...
Page 40: I-6-1 For Wan1~ Wan4 (Ethernet)
Internet Access Type. Click PPPoE as the Internet Access Type. Then click Next to continue. Available settings are explained as follows: Item Description Service Name Enter the description of the specific network service. (Optional) Vigor3220 Series User’s Guide...
Page 41 Please manually enter the Username/Password provided by your ISP. Click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor3220 Series User’s Guide...
Page 42 Note: The maximum length of the user name you can set is 63 characters. Password Assign a valid password provided by the ISP. Note: The maximum length of the password you can set is 62 characters. Vigor3220 Series User’s Guide...
Page 43 Then click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor3220 Series User’s Guide...
Page 44 Type in secondary IP address for necessity in the future. Back Click it to return to previous setting page. Next Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. Vigor3220 Series User’s Guide...
Page 45 Please type in the IP address information originally provided by your ISP. Then click Next for next step. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor3220 Series User’s Guide...
Page 46 In such cases you need to enter the MAC address. Back Click it to return to previous setting page. Next Click it to get into the next setting page. Cancel Click it to give up the quick start wizard. Vigor3220 Series User’s Guide...
Page 47 After finished the settings above, click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor3220 Series User’s Guide...
Page 48: I-6-2 For Wan5 (Usb)
Please use the default value. If you have any question, please contact to your ISP. The maximum length of the string you can set is 47 characters. APN Name – APN means Access Point Name which is provided Vigor3220 Series User’s Guide...
Page 49 Then, click Next for viewing summary of such connection. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, the system status of this protocol will be shown. Now, you can enjoy surfing on the Internet. Vigor3220 Series User’s Guide...
Page 50: Service Activation Wizard
Service Activation Wizard is a tool which allows you to use trial version of WCF directly without accessing into the server (MyVigor) located on http://myvigor.draytek.com. For using Web Content Filter Profile, please refer to later section Web Content Filter Profile for detailed information.
Page 51 Commtouch is the web content filter based on Commtouch operated in the worldwide. There is a 30-day trial period. After trial, you can purchase DrayTek's prepared Commtouch GlobalView WCF package from retailing outlets. BPjM is WCF for German Speaking users. The fragfINN is whitelist for German Speaking users.
Page 52 The valid time for the free trial of these services is one month. When all the trial editions for various web content filters had been enabled, the configuration page of Service Activation Wizard will be invalid as shown below. Vigor3220 Series User’s Guide...
Page 53: Registering Vigor Router
Please login the web configuration interface of Vigor router by typing “admin/admin” as User Name / Password. Click Support Area>>Production Registration from the home page. A Login page will be shown on the screen. Please type the account and password that you created previously. And click Login. Vigor3220 Series User’s Guide...
Page 54 Account for MyVigor to create your own one. Please read the articles on the Agreement regarding user rights carefully while creating a user account. The following page will be displayed after you logging in MyVigor. From this page, please click Add or Product Registration. Vigor3220 Series User’s Guide...
Page 55 Registration Date). After adding the basic information for the router, please click Submit. Vigor3220 When the following page appears, your router information has been added to the database. After clicking OK, you will see the following page. Your router has been registered to myvigor website successfully. Vigor3220 Series User’s Guide...
Page 56 Vigor3220 Series User’s Guide...
Page 57: Part Ii Connectivity
Address Translation (NAT) function of the router will dedicate to translate public/private addresses, and the packets will be delivered to the correct host PC in the local area network. DNS, LAN DNS, UPnP, IGMP, WOL, RADIUS, … Static Route, Load-Balance/Route Policy Vigor3220 Series User’s Guide...
Page 58: Wan
Users can use LAN ports on the router to access Internet. Also, they can access Internet via 802.11(a/b/g/n/ac) wireless standard, and enjoy the powerful firewall, bandwidth management, and VPN features of Vigor3220n series. Vigor3220 Series User’s Guide...
Page 59 Besides, 3G/4G USB Modem in WAN3/WAN4 also can be used as backup device. Therefore, when WAN1 and WAN2 are not available, the router will use 3.5G for supporting automatically. The supported 3G/4G USB Modem will be listed on DrayTek web site. Please visit www.draytek.com for more detailed information.
Page 60: Web User Interface
Line Speed(Kbps) Display the downstream and upstream rate of such WAN interface. DownLink/UpLink Active Mode Display whether such WAN interface is Active device or backup device. Backup (WAN#)- Display the backup WAN interface for such Vigor3220 Series User’s Guide...
Page 61: Ii-1-1-1 Wan1 ~ Wan4 (Ethernet)
Please type the tag value and specify the priority for the packets sending by WAN1. Disable – Disable the function of VLAN with tag. Tag value – Type the value as the VLAN ID number. The Vigor3220 Series User’s Guide...
Page 62: Ii-1-1-2 Wan5 (Usb)
Available settings are explained as follows: Item Description Enable Choose Yes to invoke the settings for this WAN interface. Choose No to disable the settings for this WAN interface. Display Name Type the description for such WAN interface. Vigor3220 Series User’s Guide...
Page 63 WAN interfaces (checked below) disconnect. Check boxes for WAN1 to WAN5 – Specify the WAN  interface by checking the WAN box. After finished the above settings, click OK to save the settings. Vigor3220 Series User’s Guide...
Page 64: Ii-1-2 Internet Access
Details Page for accessing the page to configure the settings. Details Page This button will open different web page (based on IPv4) according to the access mode that you choose in WAN interface. Note that Details Page will be changed slightly based on physical mode. Vigor3220 Series User’s Guide...
Page 65 Option Number – Type a number for such function. DataType – Choose the type (ASCII or Hex) for the data to be stored. Data – Type the content of the data to be processed by the function of DHCP option. Vigor3220 Series User’s Guide...
Page 66: Ii-1-2-1 Details Page For Pppoe In Etherenet Wan
Such function allows you to verify whether network Detection connection is alive or not through ARP Detect or Ping Detect. Mode – Choose ARP Detect or Ping Detect for the system to execute for WAN detection. Vigor3220 Series User’s Guide...
Page 67: Ii-1-2-2 Details Page For Static Or Dynamic Ip In Etherenet Wan
If you have a public subnet, you could assign an IP address or many IP address to the WAN interface. To use Static or Dynamic IP as the accessing protocol of the internet, please click the Static or Dynamic IP tab. The following web page will be shown. Vigor3220 Series User’s Guide...
Page 68 TTL (Time to Live) – Displays value for your reference. TTL value is set by telnet command. It means Max Transmit Unit for packet. RIP Protocol Routing Information Protocol is abbreviated as RIP （RFC1058） specifying how routers exchange routing tables information. Vigor3220 Series User’s Guide...
Page 69 Type in the primary IP address for the router if you want to use Static IP mode. If necessary, type in secondary IP address for necessity in the future. After finishing all the settings here, please click OK to activate them. Vigor3220 Series User’s Guide...
Page 70: Ii-1-2-3 Details Page For Pptp/L2Tp In Etherenet Wan
Internet after passing through the time without any action. IP Address Assignment WAN IP Alias - If you have multiple public IP addresses and Method(IPCP) would like to utilize them on the WAN interface, please use Vigor3220 Series User’s Guide...
Page 71: Ii-1-2-4 Details Page For 3G/4G Usb Modem (Ppp Mode) In Usb Wan
Internet Access from WAN menu. Then, select 3G/4G USB Modem (PPP mode) for WAN5. The following web page will be shown. Available settings are explained as follows: Item Description Modem Support List It lists all of the modems supported by such router. Vigor3220 Series User’s Guide...
Page 72 WAN detection. If you choose Ping Detect as the detection mode, you have to type required settings for the following items.  Primary/Secondary Ping IP – If you choose Ping Detect as detection mode, you have to type Primary or Secondary IP Vigor3220 Series User’s Guide...
Page 73: Ii-1-2-5 Details Page For 3G/4G Usb Modem (Dhcp Mode) In Usb Wan
SIM PIN code Type PIN code of the SIM card that will be used to access Internet. The maximum length of the PIN code you can set is 19 characters. Vigor3220 Series User’s Guide...
Page 74: Ii-1-2-6 Details Page For Ipv6 - Offline In Ethernet/Usb Wan
Vigor router through IPv6CP. Later, use DHCPv6 or accept RA to acquire the IPv6 prefix address (such as: 2001:B010:7300:200::/64) offered by the ISP. In addition, PCs under LAN also can have the public IPv6 address for Internet access by means of the generated prefix. Vigor3220 Series User’s Guide...
Page 75 IP address in this field for pinging.  TTL (Time to Live) –If you choose Ping Detect as detection mode, you have to type TTL value. Below shows an example for successful IPv6 connection based on PPP mode. Vigor3220 Series User’s Guide...
Page 76: Ii-1-2-8 Details Page For Ipv6 - Tspc In Etherenet Wan
Type the password assigned with the user name. The maximum length of the name you can set is 19 characters. Tunnel Broker Type the address for the tunnel broker IP, FQDN or an optional port number. Vigor3220 Series User’s Guide...
Page 77: Ii-1-2-9 Details Page For Ipv6 - Aiccu In Ethernet Wan
Tunnel Broker It means a server of AICCU. The server can provide IPv6 tunnels to sites or end users over IPv4. Type the address for the tunnel broker IP, FQDN or an optional port number. Vigor3220 Series User’s Guide...
Page 78 IP address in this field for pinging.  TTL (Time to Live) –If you choose Ping Detect as detection mode, you have to type TTL value. After finished the above settings, click OK to save the settings. Vigor3220 Series User’s Guide...
Page 79: Ii-1-2-10 Details Page For Ipv6 - Dhcpv6 Client In Ethernet Wan
User Management will be ignored. And all of the filter rules defined and enabled in Firewall menu will be activated. Bridge Subnet – Make a bridge between the selected LAN subnet and such WAN interface. After finished the above settings, click OK to save the settings. Vigor3220 Series User’s Guide...
Page 80: Ii-1-2-11 Details Page For Ipv6 - Static Ipv6 In Ethernet Wan
Ping IP/Hostname – If you choose Ping Detect as detection mode, you have to type IP address in this field for pinging.  TTL (Time to Live) –If you choose Ping Detect as detection mode, you have to type TTL value. Vigor3220 Series User’s Guide...
Page 81: Ii-1-2-12 Details Page For Ipv6 - 6In4 Static Tunnel In Ethernet Wan
Type the static IPv6 address for IPv4 tunnel with the value for prefix length. LAN Routed Prefix Type the static IPv6 address for LAN routing with the value for prefix length. Tunnel TTL Type the number for the data lifetime in tunnel. Vigor3220 Series User’s Guide...
Page 82 TTL (Time to Live) –If you choose Ping Detect as detection mode, you have to type TTL value. After finished the above settings, click OK to save the settings. Below shows an example for successful IPv6 connection based on 6in4 Static Tunnel mode. Vigor3220 Series User’s Guide...
Page 83: Ii-1-2-13 Details Page For Ipv6 - 6Rd In Ethernet Wan
TTL (Time to Live) –If you choose Ping Detect as detection mode, you have to type TTL value. After finished the above settings, click OK to save the settings. Below shows an example for successful IPv6 connection based on 6rd mode. Vigor3220 Series User’s Guide...
Page 84 Vigor3220 Series User’s Guide...
Page 85: Ii-1-3 Multi-Pvc/Vlan
Display whether the settings in this channel are enabled (Yes) or not (No). WAN Type Displays the physical medium that the channel will use. VLAN Tag Displays the VLAN tag value that will be used for the packets traveling on this channel. Vigor3220 Series User’s Guide...
Page 86 VLAN. The range is from 0 to 7. Bridge mode Enable – Click it to enable Bridge mode for such channel. Physical Members – Group the physical ports by checking the corresponding check box(es) for applying the bridge connection. Vigor3220 Series User’s Guide...
Page 87 Domain Name – Type in the domain name that you have assigned. Specify an IP address – Click this radio button to specify some data.  IP Address – Type in the private IP address.  Subnet Mask – Type in the subnet mask. Vigor3220 Series User’s Guide...
Page 88 Static IP mode. If necessary, type in secondary IP address for necessity in the future. After finished the above settings, click OK to save the settings and return to previous page. Vigor3220 Series User’s Guide...
Page 89: Ii-1-4 Wan Budget
Shutdown WAN interface – All the outgoing traffic through such WAN interface will be terminated. Send Mail Alert to Administrator – The system will send out a warning message to the administrator when the quota is Vigor3220 Series User’s Guide...
Page 90: Ii-1-4-2 Monitor Page
Vigor router will reset the traffic record. For example, “3” means the third day of the cycle duration. After finished the above settings, click OK to save the settings. The monitor page displays the status WAN budget, including the duration and the usage. Vigor3220 Series User’s Guide...
Page 91 Send Mail Alert to Administrator is selected. Or, the system will send out SMS message to the administrator if Send SMS messages to Administrator is selected. Vigor3220 Series User’s Guide...
Page 92: Application Notes
TSPC, AICCU, DHCPv6 Client and Static IPv6. Access into the web user interface of Viogr3220. Open WAN>> Internet Access. Choose one of the WAN interfaces as the one supporting IPv6 service. Then, click the IPv6 button of the selected WAN. Vigor3220 Series User’s Guide...
Page 93 Different connection types will bring out different configuration page. Refer to the following:  PPP – Dual Stack application, IPv4 and IPv6 services can be utilized at the same time Choose PPP and type the information for PPPoE of IPv4. Vigor3220 Series User’s Guide...
Page 94 Access into the setting page for IPv6 service, it is not necessary for you to configure anything. Click OK and open Online Status. If the connection is successful, you will get the IP address for IPv4 and IPv6 at the same time. Vigor3220 Series User’s Guide...
Page 95 Vigor3220 Series User’s Guide...
Page 96 (In the following figure, the TSPC information is obtained from http://gogo6.com/ after applied for the service.) Click OK and open Online Status. If the connection is successful, the physical connection will be shown as follows: Vigor3220 Series User’s Guide...
Page 97 (In the following figure, the AICCU information is obtained from https://www.sixxs.net/main/ after applied for the service.) Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor3220 Series User’s Guide...
Page 98  DHCPv6 Client Choose DHCPv6 Client. Click one of the identity associations and type the IAID number. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor3220 Series User’s Guide...
Page 99  Static IPv6 Choose Static IPv6. Type IPv6 address, Prefix Length and Gateway Address. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor3220 Series User’s Guide...
Page 100 Choose 6in4 Static Tunnel. Type remote endpoint IPv4 address, 6in4 IPv6 Address, LAN Routed Prefix and Tunnel TTL. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor3220 Series User’s Guide...
Page 101  Choose 6rd. Type IPv4 Border Relay, IPv4 Mask Length, 6rd Prefix and 6rd Prefix Length. Click OK and open Online Status. If the connection is successful, the physical connection will be shows as follows: Vigor3220 Series User’s Guide...
Page 102 In the field of DHCPv6 Server Configuration, when DHCPv6 service is enabled, you can assign available IPv6 address for the client manually. Info When both mechanisms are enabled, the client can determine which mechanism to be used (e.g., the default mechanism for Windows7 is RADVD). Vigor3220 Series User’s Guide...
Page 103 Use the Ping command to ping any IPv6 address indicating an IPv6 website. For example, www.kame.net is a website supporting IPv4 IP and IPv6 IP services. Its IPv6 address is seen with a format of 2001:200:dff:fff1:216:3eff:feb1:44d7. After getting the above message, it means the IPv6 service has been activated successfully. Vigor3220 Series User’s Guide...
Page 104 If not, only a steady turtle will be seen. If you can see a turtle dancing on the screen, that means IPv6 service is ready for you to access and utilize. Vigor3220 Series User’s Guide...
Page 105: Lan
IP address. As a part of the public subnet, the Vigor router will serve for IP routing to help hosts in the public subnet to communicate with other public hosts or servers outside. Therefore, the router should be set as the gateway for public hosts. Vigor3220 Series User’s Guide...
Page 106 You can group local hosts by physical ports and create up to 8 virtual LANs. To manage the communication between different groups, please set up rules in Virtual LAN (VLAN) function and the rate of each. Vigor3220 Series User’s Guide...
Page 107: Web User Interface
LAN6 can be operated under NAT or Route mode. IP Routed Subnet can be operated under Route mode. Available settings are explained as follows: Item Description General Setup Allow to configure settings for each subnet respectively. Vigor3220 Series User’s Guide...
Page 108 Data – Type the content of the data to be processed by the function of DHCP option. Inter-LAN Routing Check the box to link two or more different subnets (LAN and LAN). When you finish the configuration, please click OK to save and exit this page. Vigor3220 Series User’s Guide...
Page 109: Ii-2-1-1 Details Page For Lan1 - Ethernet Tcp/Ip And Dhcp Setup
Disable Server – Let you manually assign IP address to every host in the LAN. Enable Relay Agent –Specify which subnet that DHCP server is located the relay agent should redirect the DHCP request  DHCP Server IP Address – It is available when Enable Vigor3220 Series User’s Guide...
Page 110 If the IP address of a domain name is already in the DNS cache, the router will resolve the domain name immediately. Otherwise, the router forwards the DNS query packet to the external DNS server by establishing a WAN (e.g. DSL/Cable) Vigor3220 Series User’s Guide...
Page 111: Ii-2-1-2 Details Page For Lan1 - Ipv6 Setup
Check the box to enable the configuration of LAN 1 IPv6 Setup. WAN Primary Interface Use the drop down list to specify a WAN interface for IPv6. Static IPv6 Address IPv6 Address –Type static IPv6 address for LAN. Vigor3220 Series User’s Guide...
Page 112 Disable Server –Click it to disable DHCPv6 server. Start IPv6 Address / End IPv6 Address –Type the start and end address for IPv6 server. Advance setting More options are offered under the Advance setting. Click Edit to open the pop-up window. Vigor3220 Series User’s Guide...
Page 113 Extension WAN – Not only the IP address can be obtained from the primary WAN, but also the prefix for IPv6 LAN IP address can be assigned by extension WAN specified here. When you finish the configuration, please click OK to save and exit this page. Vigor3220 Series User’s Guide...
Page 114: Ii-2-1-3 Details Page For Lan2 ~ Lan6 And Dmz
Start IP Address - Enter a value of the IP address pool for the DHCP server to start with when issuing IP addresses. If the 1st IP address of your router is 192.168.1.1, the starting IP address must be 192.168.1.2 or greater, but smaller than Vigor3220 Series User’s Guide...
Page 115: Ii-2-1-4 Details Page For Ip Routed Subnet
Network Configuration Enable/Disable - Click Enable to enable such configuration; click Disable to disable such configuration. For Routing Usage, IP Address - Type in private IP address for connecting to a local private network (Default: 192.168.1.1). Vigor3220 Series User’s Guide...
Page 116 Edit – Click it to edit the selected MAC address. Cancel – Click it to cancel the job of adding, deleting and editing. When you finish the configuration, please click OK to save and exit this page. Vigor3220 Series User’s Guide...
Page 117: Ii-2-2 Vlan
Go to LAN page and select VLAN. The following page will appear. Click Enable to invoke VLAN function. Below is an example page in Vigor3220n: Info Settings in this page only applied to LAN port but not WAN port. Vigor3220 Series User’s Guide...
Page 118 Leave one VLAN untagged at least to prevent from not connecting to Vigor router due to unexpected error. Vigor3220 Series features a hugely flexible VLAN system. In its simplest form, each of the Gigabit LAN ports can be isolated from each other, for example to feed different companies or departments but keeping their local traffic completely separated.
Page 119 Click OK. Open LAN>>General Setup. If you want to let the clients in both groups communicate with each other, simply activate Inter-LAN Routing by checking the box between LAN1 and LAN2. Vigor3220 Series User’s Guide...
Page 120: Ii-2-3 Bind Ip To Mac
Click this radio button to disable this function. All the settings on this page will be invalid. Strict Bind Click this radio button to block the connection of the IP/MAC which is not listed in IP Bind List. Vigor3220 Series User’s Guide...
Page 121 PC. If not, no one of the PCs can access into Internet. And the web user interface of the router might not be accessed. When you finish the configuration, click OK to save the settings. Vigor3220 Series User’s Guide...
Page 122: Ii-2-4 Lan Port Mirror
Select which ports are necessary to be mirrored for transmitting the packets. Mirrored Rx Port Select which ports are necessary to be mirrored for receiving the packets. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 123: Ii-2-5 Web Portal Setup
Display the applied interface of the profile. Preview Open a preview window according to the configured settings. There are four profiles which allow you to configure mode, priority, and applied interface in response to different conditions or requirements. Vigor3220 Series User’s Guide...
Page 124 Button – Define the word (default word is “Continue”) shown on the button.  User must click button to proceed – Check the box to force the user click the button (with the word defined on Button box) to proceed the operation. Vigor3220 Series User’s Guide...
Page 125 Check the box(es) representing different interfaces to be applied by such profile. The advantage is that each SSID (1/2/3/4) for wireless network can be applied with different web portal separately. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 126: Nat
Usually we use the 192.168.1.0/24 subnet for the router. As stated before, the NAT facility can map one or more IP addresses and/or service ports into different specified services. In other words, the NAT function can be achieved by using port mapping methods. Vigor3220 Series User’s Guide...
Page 127: Web User Interface
The port redirection can only apply to incoming traffic. To use this function, please go to NAT page and choose Port Redirection web page. The Port Redirection Table provides 40 port-mapping entries for the internal hosts. Vigor3220 Series User’s Guide...
Page 128 Display the IP address of the internal host providing the service. Status Display if the profile is enabled (v) or not (x). Press any number under Index to access into next page for configuring port redirection. Available settings are explained as follows: Item Description Vigor3220 Series User’s Guide...
Page 129 80 to avoid conflict, such as 8080. This can be set in the System Maintenance >>Management Setup. You then will access the admin screen of by suffixing the IP address with 8080, e.g., http://192.168.1.1:8080 instead of port 80. Vigor3220 Series User’s Guide...
Page 130: Ii-3-2 Dmz Host
Click DMZ Host to open the following page. You can set different DMZ host for each WAN interface. Click the WAN tab to switch into the configuration page for that WAN. Vigor3220 Series User’s Guide...
Page 131 WAN1 only. See the following figure. If you previously have set up WAN Alias for PPPoE or Static or Dynamic IP mode in WAN2 interface, you will find them in Aux. WAN IP for your selection. Vigor3220 Series User’s Guide...
Page 132 When you have selected one private IP from the above dialog, the IP address will be shown on the screen. Click OK to save the setting. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 133: Ii-3-3 Open Ports
Inactive or Active state. To add or edit port settings, click one index number on the page. The index entry setup page will pop up. In each index entry, you can specify 10 port ranges for diverse services. Vigor3220 Series User’s Guide...
Page 134 Specify the starting port number of the service offered by the local host. End Port Specify the ending port number of the service offered by the local host. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 135: Ii-3-4 Port Triggering
Display the protocol for the incoming data of such triggering profile. Incoming Port Display the port for the incoming data of such triggering profile. Status Display if the rule is active or de-active. Click the index number link to open the configuration page. Vigor3220 Series User’s Guide...
Page 136 (TCP, UDP or TCP/UDP) for the incoming data of such triggering profile. Incoming Port Type the port or port range for the incoming packets. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 137: Applications
FTP, Mail or Web server inside LAN, you can specify specific private IP address (es) to correspondent servers. Thus, even the remote PC is adopting public DNS as the DNS server, the LAN DNS resolution on Vigor3220 Series will respond the specified private IP address.
Page 138 Wake on LAN (WOL) of this router. In addition, such PC must have installed a network card supporting WOL function. By the way, WOL function must be set as “Enable” on the BIOS setting. Vigor3220 Series User’s Guide...
Page 139: Web User Interface
Account, and choose correct Service Provider: dyndns.org, type the registered hostname: hostname and domain name suffix: dyndns.org in the Domain Name block. The following two blocks should be typed your account Login Name: test and Password: test. Vigor3220 Series User’s Guide...
Page 140 IP used by the NAT router and use the detected IP address for DDNS update. There are two methods offered for you to choose: WAN IP - If it is selected and the WAN IP of Vigor router  Vigor3220 Series User’s Guide...
Page 141 In the DDNS setup menu, uncheck Enable Dynamic DNS Setup, and push Clear All button to disable the function and clear all accounts from the router. In the DDNS setup menu, click the Index number you want to delete and then push Clear All button to delete the account. Vigor3220 Series User’s Guide...
Page 142: Ii-4-2 Lan Dns / Dns Forwarding
FTP, Mail or Web server inside LAN, you can specify specific private IP address (es) to correspondent servers. Thus, even the remote PC is adopting public DNS as the DNS server, the LAN DNS resolution on Vigor3220 Series will respond the specified private IP address.
Page 143 The IP address listed here will be used for mapping with the domain name specified above. In general, one domain name maps with one IP address. If required, you can configure two IP addresses mapping with the same domain name. Vigor3220 Series User’s Guide...
Page 144 Type the domain name for such profile. DNS Server IP Address Type the IP address of the DNS server you want to use for DNS forwarding. Click OK button to save the settings. A new LAN DNS profile has been created. Vigor3220 Series User’s Guide...
Page 145 Vigor3220 Series User’s Guide...
Page 146: Ii-4-3 Schedule
You can set up to 15 schedules. Then you can apply them to your Internet Access or VPN and Remote Access >> LAN-to-LAN settings. To add a schedule: Click any index, say Index No. 1. The detailed settings of the call schedule with index 1 are shown below. Vigor3220 Series User’s Guide...
Page 147 Click OK button to save the settings. Example Suppose you want to control the PPPoE Internet access connection to be always on (Force On) from 9:00 to 18:00 for whole week. Other time the Internet access connection should be disconnected (Force Down). Vigor3220 Series User’s Guide...
Page 148: Ii-4-4 Radius/Tacacs
RADIUS server. Then LAN user of Vigor router will be authenticated by such server for network application. Available settings are explained as follows: Item Description Enable Check to enable RADIUS client feature. Server IP Address Enter the IP address of RADIUS server Vigor3220 Series User’s Guide...
Page 149: Ii-4-4-2 Internal Radius
Allow to configure that clients under specified domain (IPv4 and IPv6) must be authenticated with the specified shared secret. Enable - Check to enable RADIUS client feature. Shared Secret - The RADIUS server and client share a secret Vigor3220 Series User’s Guide...
Page 150: Ii-4-4-3 External Tacacs
After finished the above settings, click OK button to save the settings. It means Terminal Access Controller Access-Control System Plus. It works like RADIUS does. Click the TACACS+ Setup to open the following page: Available settings are explained as follows: Vigor3220 Series User’s Guide...
Page 151 Both sides must be configured to use the same shared secret. Confirm Shared Secret Re-type the Shared Secret for confirmation. After finished the above settings, click OK button to save the settings. Vigor3220 Series User’s Guide...
Page 152: Ii-4-5 Active Directory/ Ldap
LDAP to search or list the directory object, inquire or manage the active directory. This page allows you to enable the function and specify general settings for LDAP server. Vigor3220 Series User’s Guide...
Page 153 After finished the above settings, click OK button to save the settings. You can configure eight AD/LDAP profiles. These profiles would be used with User Management for different purposes in management. Click any index number link to open the following page. Vigor3220 Series User’s Guide...
Page 154 After finished the above settings, click OK to save and exit this page. A new profile has been created. For detailed information about LDAP application, refer to section 4.6 How to Implement the AD/LDAP Authentication for User Management? Vigor3220 Series User’s Guide...
Page 155: Ii-4-6 Upnp
Non-privileged users can control some router functions, including removing and adding port mappings. The UPnP function dynamically adds port mappings on behalf of some UPnP-aware applications. When the applications terminate abnormally, these mappings may not be removed. Vigor3220 Series User’s Guide...
Page 156: Ii-4-7 Igmp
This field displays the ID port for the multicast group. The available range for IGMP starts from 224.0.0.0 to 239.255.255.254. It indicates the LAN port used for the multicast group. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 157: Ii-4-8 Wake On Lan
MAC Address Type any one of the MAC address of the bound PCs. Wake Up Click this button to wake up the selected IP. See the following figure. The result will be shown on the box. Vigor3220 Series User’s Guide...
Page 158: Ii-4-9 Sms / Mail Alert Service
SMS. Schedule Type the schedule number that the SMS will be sent out. You can click the Schedule(1-15) link to define the schedule. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 159 Schedule Type the schedule number that the notification will be sent out. You can click the Schedule(1-15) link to define the schedule. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 160: Ii-4-10 Bonjour
Below shows an example for applying the bonjour feature that Vigor router can be used as the FTP server. 1. Here, we use Firefox and DNSSD to discover the service in such case. Therefore, just ensure the Bonjour client program and DNSSD for Firefox have been installed on the computer. Vigor3220 Series User’s Guide...
Page 161 (DNSSD) and see the following results. 3. Open System Maintenance>>Management. Type a name (e.g., Dray_2925) as the Router Name and click OK. 4. Next, open Applications>>Bonjour. Check the service that you want to use via Bonjour. Vigor3220 Series User’s Guide...
Page 162 Vigor router (based on Bonjour protocol) is ready to be used as a printer server, FTP server, SSH Server, Telnet Server, and HTTP Server. 6. Now, any page or document can be printed out through Vigor router (installed with a printer). Vigor3220 Series User’s Guide...
Page 163: Ii-4-11 High Availability
The high availability of the Vigor3220 Series is designed to avoid single points-of-failure. When failures occur, the failover process moves processing performed by the failed component (the “primary”) to the backup component (the “secondary”). This process remains system-wide resources, recovers partial of failed transactions, and restores the system to normal within a few seconds.
Page 164: Ii-4-11-1 General Setup
Each router must be specified with one group ID. Different routers with the same ID value will be categoried into the same group. Only one of the routers in the same group will be selected as Vigor3220 Series User’s Guide...
Page 165 It is used for encrypting the DARP to prevent malicious attack. Management Interface Such interface is used for DARP (DrayTek Address Redundancy Protocol) negotiation between routers. Only the interface which is enabled in LAN>>General Setup is available for selection.
Page 166: Ii-4-11-2 Config Sync
Config Sync Interval Day / Hour / Minute - Primary router will sync its configuration to secondary router based on the time interval set here. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 167 Take the following picture as an example. The upper Vigor3220 is regarded as primary device, the lower Vigor3220 is regarded as secondary device. When primary Vigor3220 Series is broken down, the secondary device could replace the primary role to take over all jobs as soon as possible.
Page 168: Application Notes
Create LDAP server profiles. Click the Active Directory /LDAP tab to open the profile web page and click any one of the index number link. If we have two groups “RD1” and “SHRD” on LDAP server, we can configure two LDAP server profiles with different Group Distinguished Name. Vigor3220 Series User’s Guide...
Page 169 Click OK to save the settings above. Open User Management>>General Setup. Select User-Based as the Mode option. Vigor3220 Series User’s Guide...
Page 170 Then open VPN and Remote Access>>PPP General Setup to check the profile(s) that will be authenticated with LDAP server. After above configurations, users belong to either “rd1” or “shrd” group can access Internet after inputting their credentials on LDAP server. Vigor3220 Series User’s Guide...
Page 171: Routing
Other routing Specify routing policy to determine the direction of the data transmission. Info For more detailed information about using policy route, refer to Support >>FAQ/Application Notes on www.draytek.com. Vigor3220 Series User’s Guide...
Page 172: Web User Interface
Displays the destination address of the static route. Status Displays the status of the static route. Set to Factory Default Clear all of the settings and return to factory default settings. Viewing Routing Table Displays the routing table for your reference. Vigor3220 Series User’s Guide...
Page 173 1st subnet (192.168.1.0/24). The second is that those hosts on the internal private subnets (ex. 192.168.10.0/24) can access the Internet via the router, and continuously exchange of IP routing information with different subnets. Vigor3220 Series User’s Guide...
Page 174 Return to Static Route Setup page. Click on another Index Number to add another static route as show below, which regulates all packets destined to 211.100.88.0 will be forwarded to 192.168.1.3. Click OK. Go to Diagnostics and choose Routing Table to verify current routing table. Vigor3220 Series User’s Guide...
Page 175 Item Description Enable Click it to enable this profile. Destination IPv6 Address / Type the IP address with the prefix length for this entry. Prefix Len Gateway IPv6 Address Type the gateway address for this entry. Vigor3220 Series User’s Guide...
Page 176: Ii-5-2 Load-Balance /Route Policy
Displays the IP address for the end of the destination IP. Dest Port Start Displays the IP address for the start of the destination port. Dest Port End Displays the IP address for the end of the destination port. Vigor3220 Series User’s Guide...
Page 177 Dest IP End - Type the destination IP end for the specified WAN interface. If this field is blank, it means that all the destination IPs will be passed through the WAN interface. 3. Click Next to get the following page. Available settings are explained as follows: Vigor3220 Series User’s Guide...
Page 178 It determines which mechanism that the router will use to Routing forward the packet to WAN. 5. After choosing the mechanism, click Next to get the summary page for reference. 6. If there is no error, click Finish to complete wizard setting. Vigor3220 Series User’s Guide...
Page 179 Src IP Start - Type the source IP start for the specified WAN interface. Src IP End - Type the source IP end for the specified WAN interface. If this field is blank, it means that all the source Vigor3220 Series User’s Guide...
Page 180 Gateway IP – Specific gateway is used only when you want to forward the packets to the desired gateway. Usually, Default Gateway is selected in default. When you finish the configuration, please click OK to save and exit this page. Vigor3220 Series User’s Guide...
Page 181: Ii-5-2-2 Diagnose
Dst Port – Use the drop down list to specify the destination port. Analyze – Click it to perform the job of analyzing. The analyzed result will be shown on the page. If required, click export analysis to export the result as a file. Vigor3220 Series User’s Guide...
Page 182 If required, click export analysis to export the result as a file. Note that the analysis was based on the current "load-balance/route policy" settings, we do not guarantee it will be 100% the same as the real case. Vigor3220 Series User’s Guide...
Page 183: Application Notes
The web user interface will be revised later. Example 1: In the following figure, a LAN to LAN VPN tunnel is built between DrayTek VPN router (e.g., Vigor3220 Series) and the remote router. Firewall Router can receive all of the traffic coming from remote PC which wants to access into Internet;...
Page 184 To route the packets coming from the Firewall Router back to the remote router, access into the web user interface of the Firewall Router. Then, set “192.168.1.1/24” as the gateway IP address and set “172.16.3.0/24” as the destination IP address. Vigor3220 Series User’s Guide...
Page 185 In the following web page, check Enable; type “192.168.1.10” as Src IP Range; type “213.57.89.100” as the Destination IP for the remote VPN server; and choose VPN as the Interface setting. Click OK to save the settings. Vigor3220 Series User’s Guide...
Page 186: How To Setup Address Mapping
We will take an example to introduce how to make use of this feature. Log into the web user interface of Vigor3220. Open WAN>>Internet Access. For WAN1, choose Static or Dynamic IP as the Access Mode. Vigor3220 Series User’s Guide...
Page 187 WAN IP address as 202.211.100.10. Click the WAN IP Alias button to configure the other IP address which is 202.211.100.11. Make sure Join IP NAT Pool is not checked. Click OK to save the settings. Vigor3220 Series User’s Guide...
Page 188 After finished configuration for WAN1, open Load-Balance/Route Policy. Click Index number 1 and 2 to configure the details. After finished the settings, click OK to save the settings respectively. Vigor3220 Series User’s Guide...
Page 189 Upon completing the above configuration, you have specified the outgoing IP address(es) for some specific computers. Now, you bind some specific computers to some WAN IP alias for outgoing traffic. Vigor3220 Series User’s Guide...
Page 190: How To Setup Load Balance For Packets
Internet. The PC in LAN1 can send the data to the remote PC through the specified WAN1. Access into web user interface of Vigor3220 Series. Open Load-Balance/Route Policy. From the following web page, simply click index number #1.
Page 191 203.65.1.35; choose WAN1 as the Interface; click default gateway. After finished the above settings, click OK to save the configuration. Now, the packets sent to the remote PC (IP address: 203.65.1.35) will be forced to pass through WAN1. Vigor3220 Series User’s Guide...
Page 192 This page is left blank. Vigor3220 Series User’s Guide...
Page 193: Part Iii Wireless Lan
Wireless LAN enables high mobility so WLAN users can simultaneously access all LAN facilities just like on a wired LAN as well as Internet access. Vigor3220 Series User’s Guide III-181...
Page 194: Wireless Lan
SSID as identification, located channel etc. Vigor router supports four SSID settings for wireless connections. Each SSID can be defined with different name and download/upload rate for selecting by stations connected to the router wirelessly. Vigor3220 Series User’s Guide...
Page 195 Internet without hassle of the confidential information leakage. For a more flexible deployment, you may add filters of MAC addresses to isolate users’ access from wired LAN. It will display all the stations in your wireless network and the status of their connection. Vigor3220 Series User’s Guide III-183...
Page 196 WPS (Wi-Fi Protected Setup) provides easy procedure to make network connection between wireless station and wireless access point (vigor router) with the encryption of WPA and WPA2. Vigor3220 Series User’s Guide...
Page 197: Web User Interface
Item Description Name Type the SSID name of this router for wireless 2.4GHz. The default name is defined with DrayTek. Change the name if required. Mode At present, the router can connect to 11n Only, 11g Only, Mixed (11b+11g), Mixed (11a+11n), Mixed (11g+11n), and Mixed (11b+11g+11n) stations simultaneously.
Page 198 It controls the data transmission rate through wireless connection. Total Upload – Check Enable and type the transmitting rate for data upload. Default value is 30,000 kbps. Total Download – Type the transmitting rate for data download. Default value is 30,000 kbps. Vigor3220 Series User’s Guide...
Page 199 Exit the wireless wizard without saving any changes. 4. After typing the required information, click Next. 5. The following page will display the configuration summary for wireless setting. 6. Click Finish to complete the wireless settings configuration. Vigor3220 Series User’s Guide III-187...
Page 200: Iii-1-2 General Setup
Means the identification of the wireless LAN. SSID can be any text numbers or various special characters. Isolate Member –Check this box to make the wireless clients (stations) with the same SSID not accessing for each other. Vigor3220 Series User’s Guide...
Page 201 You may choose up to 4 schedules out of the 15 schedules pre-defined in Applications >> Schedule setup. The default setting of this field is blank and the function will always work. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide III-189...
Page 202: Iii-1-3 Security
By clicking the Security Settings, a new web page will appear so that you could configure the settings of WPA and WEP. Available settings are explained as follows: Item Description There are several modes provided for you to choose. Mode Vigor3220 Series User’s Guide...
Page 203 The keys can be entered in ASCII or Hexadecimal. Check the key you wish to use. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide III-191...
Page 204: Iii-1-4 Access Control
Isolate the station from LAN - select to isolate the wireless connection of the wireless client of the MAC address from LAN. Add a new MAC address into the list. Delete Delete the selected MAC address in the list. Vigor3220 Series User’s Guide...
Page 205: Iii-1-5 Wps
He/she only needs to press a button on wireless client, and WPS will connect for client and router automatically. There are two methods to do network connection through WPS between AP and Stations: pressing the Start PBC button or using PIN Code. Vigor3220 Series User’s Guide III-193...
Page 206 For WPS is supported in WPA-PSK or WPA2-PSK mode, if you do not choose such mode in Wireless LAN>>Security, you will see the following message box. Please click OK and go back Wireless LAN>>Security to choose WPA-PSK or WPA2-PSK mode and access WPS again. Vigor3220 Series User’s Guide...
Page 207 Start PIN button. The WPS LED on the router will blink fast when WPS is in progress. It will return to normal condition after two minutes. (You need to setup WPS within two minutes) Vigor3220 Series User’s Guide III-195...
Page 208: Iii-1-6 Wds
In the following examples, hosts connected to Bridge 1 or 3 can communicate with hosts connected to Bridge 2 through WDS links. However, hosts connected to Bridge 1 CANNOT communicate with hosts connected to Bridge 3 through Bridge 2. Vigor3220 Series User’s Guide...
Page 209 Item Description Mode Choose the mode for WDS setting. Disable mode will not invoke any WDS setting. Bridge mode is designed to fulfill the first type of application. Repeater mode is for the second one. Vigor3220 Series User’s Guide III-197...
Page 210 Disable to cancel this function. Status It allows user to send “hello” message to peers. Yet, it is valid only when the peer also supports this function. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 211: Iii-1-7 Advanced Setting
The default setting is Enable. Long Preamble This option is to define the length of the sync field in an 802.11 packet. Most modern wireless network uses short preamble with 56 bit sync field instead of long preamble with Vigor3220 Series User’s Guide III-199...
Page 212 WMM Capable To apply WMM parameters for wireless data transmission, please click the Enable radio button. APSD Capable The default setting is Disable. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 213: Iii-1-8 Ap Discovery
AP’s MAC address on the bottom of the page and click Bridge or Repeater. Next, click Add to. Later, the MAC address of the AP will be added to Bridge or Repeater field of WDS settings page. Vigor3220 Series User’s Guide III-201...
Page 214: Iii-1-9 Station List
WLAN station and click Add to Access Control below. Available settings are explained as follows: Item Description Refresh Click this button to refresh the status of station list. Click this button to add current typed MAC address into Access Control. Vigor3220 Series User’s Guide...
Page 215: Iii-1-10 Station Control
SSID will be listed on Station Control List. WEB Portal Setup Click it to access in to LAN>>Web Portal Setup page for modifying the settings if required. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide III-203...
Page 216: Iii-1-11 Bandwidth Management
It is available when Per Station Limit is selected Type a value to define the maximum data traffic (downloading) for each wireless client connecting to Vigor3220. After finishing this web page configuration, please click OK to save the settings. Vigor3220 Series User’s Guide...
Page 217: Part Iv Vpn
Here Vigor router support digital certificates conforming to standard X.509. Vigor3220 Series User’s Guide...
Page 218: Vpn And Remote Access
The VPN built is suitable for: Communication between home office and customer  Secure connection between Teleworker, staff on business trip and main office   Exchange data between remote office and main office POS between chain store and headquarters  Vigor3220 Series User’s Guide...
Page 219: Web User Interface
Route Mode/NAT Mode – If the remote network only allows you to dial in with single IP, please choose NAT mode, otherwise please choose Route Mode. Please choose a There are 32 VPN profiles for users to set. LAN-to-LAN Profile Vigor3220 Series User’s Guide...
Page 220 Info The following descriptions for VPN Type are based on the Route Mode specified in LAN-to-LAN Client Mode Selection. When you choose PPTP (None Encryption) or PPTP (Encryption), you will see the following graphic: Vigor3220 Series User’s Guide...
Page 221 When you choose IPsec, you will see the following graphic: When you choose L2TP, you will see the following graphic: Vigor3220 Series User’s Guide...
Page 222 Available settings are explained as follows: Item Description Profile Name Type a name for such profile. The length of the file is limited to 10 characters. VPN Dial-Out Through Use the drop down menu to choose a proper WAN interface Vigor3220 Series User’s Guide...
Page 223 Please type one LAN IP address (according to the real location of the remote host) for building VPN connection. Remote Network Please type the network mask (according to the real location Mask of the remote host) for building VPN connection. Vigor3220 Series User’s Guide...
Page 224 Click this radio button to set another profile of VPN Server Server Wizard Setup through VPN Server Wizard. View more detailed Click this radio button to access VPN and Remote configuration Access>>LAN to LAN for viewing detailed configuration. Vigor3220 Series User’s Guide...
Page 225: Iv-1-2 Vpn Server Wizard
This item is available after you choose any one of dial-in user account profiles. Next, you have to select suitable dial-in type for the VPN server profile. There are several types provided here (similar to VPN Client Wizard). Vigor3220 Series User’s Guide...
Page 226 After making the choices for the server profile, please click Next. You will see different configurations based on the selection you made. Here we take the examples of choosing Site-to-Site VPN as the VPN Server Mode. When you check PPTP, you will see the following graphic: Vigor3220 Series User’s Guide...
Page 227 The length of the name is limited to 47 characters. Remote Network IP Please type one LAN IP address (according to the real location of the remote host) for building VPN connection. Remote Network Please type the network mask (according to the real location Vigor3220 Series User’s Guide...
Page 228 Click this radio button to set another profile of VPN Server Server Wizard Setup through VPN Server Wizard. View more detailed Click this radio button to access VPN and Remote Access>>LAN to LAN for viewing detailed configuration. configuration Vigor3220 Series User’s Guide...
Page 229: Iv-1-3 Remote Access Control
LAN, you should disable the VPN service of Vigor Router to allow VPN tunnel pass through, as well as the appropriate NAT settings, such as DMZ or open port. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 230: Iv-1-4 Ppp General Setup
Maximum MPPE - This option indicates that the router  will use the MPPE encryption scheme with maximum bits (128-bit) to encrypt the data. Mutual Authentication The Mutual Authentication function is mainly used to Vigor3220 Series User’s Guide...
Page 231 Methods connection. While using Radius or If PPP connection will be authenticated via RADIUS server or LDAP Authentication LDAP profiles, it is necessary to specify the LAN profile for the dial-in user to get IP from. Vigor3220 Series User’s Guide...
Page 232: Iv-1-5 Ipsec General Setup
(LAN-to-LAN) which uses dynamic IP address and IPsec-related VPN connections such as L2TP over IPsec and IPsec tunnel. There are two methods offered by Vigor router for you to authenticate the incoming data coming from remote dial-in user, Certificate (X.509) and Pre-Shared Vigor3220 Series User’s Guide...
Page 233: Iv-1-6 Ipsec Peer Identity
100 entries of digital certificates for peer dial-in users. Available settings are explained as follows: Item Description Set to Factory Default Click it to clear all indexes. Index Click the number below Index to access into the setting page Vigor3220 Series User’s Guide...
Page 234 The field includes Country (C), State (ST), Location (L), Organization (O), Organization Unit (OU), Common Name (CN), and Email (E). After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 235: Iv-1-7 Remote Dial-In User
Active Check the box to activate such profile. Status Display the access state of the specific dial-in user. The symbol V and X represent the specific dial-in user to be active and inactive, respectively. Vigor3220 Series User’s Guide...
Page 236 VPN connection becomes one pure L2TP connection. Must -Specify the IPsec policy to be definitely applied  on the L2TP connection. SSL Tunnel – Allow the remote dial-in user to make an SSL VPN connection through Internet. Vigor3220 Series User’s Guide...
Page 237 By default, this option is invoked. You can uncheck it to disable it. High-Encapsulating Security Payload (ESP) means payload (data) will be encrypted and authenticated. You may select encryption algorithm from Data Encryption Standard (DES), Vigor3220 Series User’s Guide...
Page 238: Iv-1-8 Lan To Lan
L2TP by itself or over IPsec) and corresponding security methods, etc. The following figure shows the summary table according to the item (All/Trunk/Online/Offline) selected for View. The following shows profiles joined into VPN Load Balance and VPN Backup mechanism. Vigor3220 Series User’s Guide...
Page 239 Click each index to edit each profile and you will get the following page. Each LAN-to-LAN profile includes 5 subgroups. If the fields gray out, it means you may leave it untouched. The following explanations will guide you to fill all the necessary fields. Vigor3220 Series User’s Guide...
Page 240 /WAN5 Only- While connecting, the router will use WAN1/WAN2/WAN3/WAN4/WAN5 as the only channel for VPN connection. WAN1 Only: Only establish VPN if WAN2 down - If  WAN2 failed, the router will use WAN1 for VPN Vigor3220 Series User’s Guide...
Page 241 User Name and Password below for the authentication of remote server. IPsec Tunnel - Build an IPsec VPN connection to the server through Internet. L2TP with IPsec Policy - Build a L2TP VPN connection Vigor3220 Series User’s Guide...
Page 242  and apply MD5 or SHA-1 authentication algorithm.  3DES without Authentication-Use triple DES encryption algorithm and not apply any authentication scheme.  3DES with Authentication-Use triple DES encryption algorithm and apply MD5 or SHA-1 authentication Vigor3220 Series User’s Guide...
Page 243 Index(1-15) - Set the wireless LAN to work at certain time interval only. You may choose up to 4 schedules out of the 15 schedules pre-defined in Applications >> Schedule setup. The default setting of this field is blank and the function will always work. Vigor3220 Series User’s Guide...
Page 244 Otherwise, the dial-in VPN connection becomes one pure L2TP connection. Must - Specify the IPsec policy to be definitely  applied on the L2TP connection. SSL Tunnel- Allow the remote dial-in user to trigger an  Vigor3220 Series User’s Guide...
Page 245 GRE over IPsec packet after configuring IPsec Dial-Out setting. Both ends must match for each other by setting same virtual IP address for communication. Logical Traffic: Such technique comes from RFC2890. Define Vigor3220 Series User’s Guide...
Page 246 VPN connection. This is usually used when you find there are several subnets behind the remote VPN router. RIP Direction - The option specifies the direction of RIP (Routing Information Protocol) packets. You can Vigor3220 Series User’s Guide...
Page 247 Advanced – Add a static route to direct all traffic destined to more Remote Network IP Addresses/ Remote Network Mask through the VPN connection. This is usually used when you find there are several subnets behind the remote VPN router. Vigor3220 Series User’s Guide...
Page 248 Virtual IP Mapping – A pop up dialog will appear for you to specify the local IP address and the mapping virtual IP address. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 249: Iv-1-9 Vpn Trunk Management
The TCP Session transmitted by using VPN TRUNK-VPN Load Balance mechanism will not be lost due to one of VPN Tunnels disconnected. Users do not need to reconnect with setting TCP/UDP Service Port again. The VPN Load Balance function can keep the transmission for internal data on tunnel stably Vigor3220 Series User’s Guide...
Page 250 IPsec, PPTP, L2TP, L2TP over IPsec (NICE), L2TP over IPsec(MUST) and so on. Member2 - Display the dial-out profile selected from the Member2 drop down list below. Advanced – This button is available only when LAN to LAN profile (or more) is created. Vigor3220 Series User’s Guide...
Page 251 Member2 drop down list below. Advanced – This button is only available when there is one or more profiles created in this page. Detailed information for this dialog, see later section - Advanced Load Balance and Backup. Vigor3220 Series User’s Guide...
Page 252 For there is one Tunnel created and connected successfully, to keep the load balance effect between two tunnels, auto-dial will be executed within two seconds. To close two tunnels of load balance after connecting, please click Disable for Status in General Setup field. Vigor3220 Series User’s Guide...
Page 253 If the router will be used as the VPN Server (i.e., with virtual address 192.168.50.200). Please type 192.168.50.200 in the field of My GRE IP. Type IP address (192.168.50.100) of the client in the field of Peer GRE IP. See the following graphic for an example. Vigor3220 Series User’s Guide...
Page 254 IP address of the server (192.168.50.200) in the field of Peer GRE IP. After setting profiles for load balance, you can choose any one of them and click Advance for more detailed configuration. The windows for advanced load balance and backup are different. Refer to the following explanation: Vigor3220 Series User’s Guide...
Page 255 VPN Load Balance Policy Below shows the algorithm for Load Balance. Edit – Click this radio button for assign a blank table for configuring Binding Tunnel. Insert after – Click this radio button to adding a new binding Vigor3220 Series User’s Guide...
Page 256 TCP Service Port/UDP Service Port/ICMP/IGMP, such binding tunnel table can be established. Detail Information This field will display detailed information for Binding Tunnel Policy. Below shows a successful binding tunnel policy for load balance: Vigor3220 Series User’s Guide...
Page 257 List the backup profile name. ERD Mode ERD means “Environment Recovers Detection”. Normal – choose this mode to make all dial-out VPN TRUNK backup profiles being activated alternatively. Resume – when VPN connection breaks down or disconnects, Vigor3220 Series User’s Guide...
Page 258: Iv-1-10 Connection Management
VPN backup function. Backup Mode - This filed displays the profile name saved in VPN TRUNK Management (with Index number and VPN Server IP address). The VPN connection built by Backup Mode supports VPN backup function. Vigor3220 Series User’s Guide...
Page 259 Dial - Click this button to execute dial out function. Refresh Seconds - Choose the time for refresh the dial information among 5, 10, and 30. Refresh - Click this button to refresh the whole connection status. Vigor3220 Series User’s Guide...
Page 260: Application Notes
Dial-in and set 0 as Idle Timeout. Now navigate to the next section, Dial-In Settings to check PPTP, IPsec Tunnel and L2TP boxes. Check the box of Specify Remote… and type the Peer VPN Server IP (e.g., Vigor3220 Series User’s Guide...
Page 261 Continue to navigate to the TCP/IP Network Settings for setting the LAN IP for remote side. Click OK to save the settings. Open VPN and Remote Access>>Connection Management to check the dial-in connection status (from branch office). Vigor3220 Series User’s Guide...
Page 262 (in this case, type VPN Client), and check the box of Enable This Profile. For such Vigor router will be set as a client, the call direction shall be set as Dial-out. Check the box of Always on for a permanent VPN connection. Vigor3220 Series User’s Guide...
Page 263 IKE Pre-Shared Key button to set the PSK; and select Medium (AH) or High (ESP) as the security method. Continue to navigate to the TCP/IP Network Settings for setting the LAN IP for the remote side. Click OK to save the settings. Vigor3220 Series User’s Guide...
Page 264 Open VPN and Remote Access>>Connection Management to check the dial-in connection status (from head office). Vigor3220 Series User’s Guide...
Page 265: Ssl Vpn
There are two benefits that SSL VPN provides:  It is not necessary for users to preinstall VPN client software for executing SSL VPN connection.  There are less restrictions for the data encrypted through SSL VPN in comparing with traditional VPN. Vigor3220 Series User’s Guide...
Page 266: Web User Interface
Self-signed to use the router’s built-in default certificate. The default certificate can be used in SSL VPN server and HTTPS Web Proxy. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 267: Iv-2-2 Ssl Web Proxy
Available settings are explained as follows: Item Description Name Type name of the profile. The length of the name is limited to 15 characters. Type the address (function variation or IP address) or path of the proxy server. Vigor3220 Series User’s Guide...
Page 268 In addition, users must execute “Connect” manually in SSL Client Portal page. SSL – If you choose such selection, web proxy over SSL will be applied for VPN. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 269: Iv-2-3 Ssl Application
To create a new SSL application profile: 1. Click number link under Index filed to set detailed configuration. 2. The following page will appear. Available settings are explained as follows: Item Description Enable Application Check the box to enable such profile. Vigor3220 Series User’s Guide...
Page 270 (100%, 80%, 60%) for such application. If you choose RDP, you have to choose the screen size for Screen Size such application. 3. Enter the required information. 4. After finished the above settings, click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 271: Iv-2-4 User Account
With SSL VPN, Vigor3220 Series let teleworkers have convenient and simple remote access to central site VPN. The teleworkers do not need to install any VPN software manually. From regular web browser, you can establish VPN connection back to your main office even in a guest network or web cafe.
Page 272 L2TP VPN connection through the Internet. You can select to use L2TP alone or with IPSec. Select from below: None - Do not apply the IPSec policy. Accordingly, the  VPN connection employed the L2TP without IPSec policy Vigor3220 Series User’s Guide...
Page 273 Medium, DES, 3DES or AES box as the security method. Medium-Authentication Header (AH) means data will be authenticated, but not be encrypted. By default, this option is invoked. You can uncheck it to disable it. High-Encapsulating Security Payload (ESP) means payload Vigor3220 Series User’s Guide...
Page 274 Local ID - Specify a local ID to be used for Dial-in setting in the LAN-to-LAN Profile setup. This item is optional and can be used only in IKE aggressive mode. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 275: Iv-2-5 User Group
Click to clear all indexes. Index Display the number of the client which connecting to FTP server. Name Display the name of the group profile. Click any index number link to open the following page for detailed configuration. Vigor3220 Series User’s Guide...
Page 276 If the above three options are enabled, the system will do the authentication based on them in sequence. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 277: Iv-2-6 Online User Status
If you have finished the configuration of SSL Web Proxy (server), users can find out corresponding settings when they access into DrayTek SSL VPN portal interface. Next, users can open SSL VPN>> Online Status to view logging status of SSL VPN.
Page 278: Certificate Management
Here you can manage generate and manage the local digital certificates, and set trusted CA certificates. Remember to adjust the time of Vigor router before using the certificate so that you can get the correct valid period of certificate. Below shows the menu items for Certificate Management. Vigor3220 Series User’s Guide...
Page 279: Web User Interface
Click this button to open Generate Certificate Signing Request window. Type in all the information that the window request such as certifcate name (used for identifying different certificate), subject alternative name type and relational settings for subject name. Then click GENERATE again. Vigor3220 Series User’s Guide...
Page 280 The supported types are PKCS12 Certificate and Certificate with a private key. Click this button to import a saved file as the certification information. There are three types of local certificate supported by Vigor router. Vigor3220 Series User’s Guide...
Page 281 Netscape and Microsoft Internet Explorer with their import and export options. Upload Certificate and It is useful when users have separated certificates and private Private Key keys. And the password is needed if the private key is encrypted. Vigor3220 Series User’s Guide...
Page 282 Next, access your CA server and enter the page of certificate request, copy the information into it and submit a request. A new certificate will be issued to you by the CA server. You can save it. Click this button to remove the selected certificate. Vigor3220 Series User’s Guide...
Page 283: Iv-3-2 Trusted Ca Certificate
Therefore, Vigor router offers a mechanism which allows you to generate root CA to save time and provide convenience for general user. Later, such root CA generated by DrayTek server can perform the issuing of local certificate. Info Root CA can be deleted but not edited.
Page 284 Trusted CA Certificate window. For viewing each trusted CA certificate, click View to open the certificate detail information window. If you want to delete a CA certificate, choose the one and click Delete to remove all the certificate information. Vigor3220 Series User’s Guide...
Page 285: Iv-3-3 Certificate Backup
Please click Backup on the following screen to save them. If you want to set encryption password for these certificates, please type characters in both fields of Encrypt password and Confirm password. Also, you can use Restore to retrieve these two settings to the router whenever you want. Vigor3220 Series User’s Guide...
Page 286: Central Vpn Management
Vigor3220 can build virtual private network (VPN) between itself and any other TR-069 CPE by the function of central VPN management. In addition, it can be treated as a server (called CVM server) which can manage TR-069 CPE for periodical firmware upgrade, configuration backup and restoring configuration. Vigor3220 Series User’s Guide...
Page 287: Web User Interface
For Vigor router can manage only the client from WAN Connection interface, therefore you have to specify which interface will be used for such function. If you choose MANUALLY, you have to specify WAN IP address. Vigor3220 Series User’s Guide...
Page 288: Iv-4-1-2 Ipsec Vpn Settings
Encryption Type Choose one of the selections as the encryption type. Local Subnet Type the IP address and subnet mask of local host. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 289: Iv-4-2 Cpe Management
All the CPEs managed by Vigor3220 Series can be seen with icons from this page. Before using such feature, make sure the CVM port has been enabled and configured properly. This page allows you to manage the CPEs connected to Vigor3220 Series.
Page 290 Vigor3220 Series automatically. Only eight remote devices can be managed by Vigor3220 at one time. Therefore, other remote devices detected by Vigor3220 Series might not be displayed in such field. Vigor3220 Series User’s Guide...
Page 291: Iv-4-2-2 Cpe Maintenance
- It means no USB disk connecting to Vigor3220. Disk Usage - When a USB disk connects to Vigor3220, the disk usage and the disk capacity will be displayed in such field. - When there is no Vigor3220 Series User’s Guide...
Page 292 Type the name of the maintenance profile. Enable Check it to enable such profile. Device Name The drop down list will display all the CPE devices detected by Vigor3220 Series. Choose the one which will be applied with such new created profile. Vigor3220 Series User’s Guide...
Page 293: Iv-4-2-3 Google Map
Click Select to locate the file you want to save, restore or upgrade for CPE. Index in Schedule Vigor3220 Series will perform the specified action to the selected CPE based on the schedule configured here. Specify one or two schedule profiles (represented by number) here.
Page 294: Iv-4-3 Vpn Management
An easy and quick method is offered to configure VPN settings for building VPN connection automatically between Vigor3220 Series (treated as VPN server) and other Vigor router (treated as CPE device, i.e., VPN client). Available parameters are listed as follows:...
Page 295: Iv-4-4 Log & Alert
Vigor3220 Series. Action Type Display the action that Vigor3220 Series will perform for the managed CPE. Message Display the information for each event. The Alert page offers brief information to identify the CPE connected to Vigor3220 Series. Vigor3220 Series User’s Guide...
Page 296: Application Notes
To manage CPEs through Vigor3220 Series, you have to set URL on CPE first and set username and password for Vigor3220 Series. For this section, we use Vigor2850 series as the example. All the CPE configuration will be done through Vigor2850 series.
Page 297 In the field of ACS Server, type the URL (IP address with port number) of Vigor3220 Series and type the same Username and Password defined on the page of Central VPN Management>>General Setup in Vigor3220 Series. Then, click Enable for CPE Client and then click OK to save the settings.
Page 298 Open WAN>>Internet Access. Use the drop down list of Access Mode on WAN1 to select MPoA (RFC1483/2684). Then, click Details Page. Click Specify an IP address. Type correct WAN IP address, subnet mask and gateway IP address for your CPE. Then click OK. Vigor3220 Series User’s Guide...
Page 299 Info Reboot the CPE device and re-log into Vigor3220 Series. CPE which has registered to Vigor3220 Series will be captured and displayed on the page of Central VPN Management>>CPE Management. Return to the web user interface of Vigor3220 Series. Open Central VPN Management>>VPN Management. Now there is one CPE displayed on the field of Unmanaged Devices List.
Page 300: Series
When a remote device is managed by Vigor3220 Series, it is easy to build VPN between these two devices. Access into the web user interface of Vigor3220 Series. Open Central VPN Management>>CPE Management. Click the device icon (marked with ) and click the PPTP/IPsec button.
Page 301 VPN and Remote Access>>LAN to LAN of the remote device for viewing the detailed information. Info The profile name is created automatically by the system. Do not modify any value in such page to avoid VPN error. Vigor3220 Series User’s Guide...
Page 302: Cvm Application - How To Upgrade Cpe Firmware Through Vigor3220 Series
Vigor2850, as an example, is chosen for Vigor3220 to perform the CPE firmware upgrade remotely in this case. Plug in USB storage disk onto Vigor3220 Series via USB interface. Make sure the USB disk has been installed correctly, otherwise, the firmware upgrade will not be successful.
Page 303 Select to locate it. Specify the Schedule profile. At last, click OK. Now, a new maintenance profile has been created. Click Now to perform the firmware upgrade immediately for Vigor2850. Wait for several minutes for firmware upgrade. Vigor3220 Series User’s Guide...
Page 304 Click Managed Devices List. Click the icon of Vigor2850 and click Edit and view the software version. Another way to check if the firmware upgrade is completed or not, simply open Central VPN Management>>Log & Alert. Vigor3220 Series User’s Guide...
Page 305: Part V Security
It also restricts users in the local network from accessing the Internet. CSM is an abbreviation of Central Security Management which is used to control IM/P2P usage, filter the web content and URL content to reach a goal of security management. Vigor3220 Series User’s Guide...
Page 306 It will check packets according to the filter rules. If legal, the packet will pass the router. The following illustrations are flow charts explaining how router will treat incoming traffic and outgoing traffic respectively. Vigor3220 Series User’s Guide...
Page 307 3. ICMP flood attack 11. TCP flag scan 4. Port Scan attack 12. Tear drop attack 5. IP options 13. Ping of Death attack 6. Land attack 14. ICMP fragment 7. Smurf attack 15. Unassigned Numbers 8. Trace route Vigor3220 Series User’s Guide...
Page 308: Web User Interface
Such page allows you to enable / disable Call Filter and Data Filter, determine general rule for filtering the incoming and outgoing data. Available settings are explained as follows: Item Description Call Filter Check Enable to activate the Call Filter function. Assign a start filter set for the Call Filter. Vigor3220 Series User’s Guide...
Page 309: Firewall
IPv4 - To prevent remote client accessing into the PCs on LAN, check the box to make the incoming packets via IPv4 being blocked by such router. It is effective only for the packets routed but not for packets translated by NAT. Vigor3220 Series User’s Guide...
Page 310 All the hosts in LAN must follow the standard configured in the APP Enforcement profile selected here. For detailed information, refer to the section of APP Enforcement profile setup. For troubleshooting needs, you can specify to record information for IM/P2P by Vigor3220 Series User’s Guide...
Page 311 Please use the drop-down list to choose a codepage. If you do not have any idea of choosing suitable codepage, please open Syslog. From Codepage Information of Setup dialog, you will see the recommended codepage listed on the dialog box. Vigor3220 Series User’s Guide...
Page 312 However, if the network is not stable, small value will be proper. Session timeout – Setting timeout for sessions can make the best utilization of network resources. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 313: V-1-2 Filter Setup
Set the link to the next filter set to be executed after the current filter run. Do not make a loop with many filter sets. To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page. Vigor3220 Series User’s Guide...
Page 314 Call Filter, this setting is not available since Call Filter is only applied to outgoing traffic. Note: RT means routing domain for 2nd subnet or other LAN. Source/Destination IP Click Edit to access into the following dialog to choose the source/destination IP or IP ranges. Vigor3220 Series User’s Guide...
Page 315 Protocol - Specify the protocol(s) which this filter rule will apply to. Source/Destination Port – (=) – when the first and last value are the same, it indicates one port; when the first and last values are different, it Vigor3220 Series User’s Guide...
Page 316 Choose one of the QoS rules to be applied as firewall rule. For detailed information of setting QoS, please refer to the related section later. User Management Such item is available only when Rule-Based is selected in Vigor3220 Series User’s Guide...
Page 317 Or click the DNS Filter link from the drop down list in this page to create a new profile. Advance Setting Click Edit to open the following window. However, it is strongly recommended to use the default settings here. Vigor3220 Series User’s Guide...
Page 318 TCP protocol only; session timeout is configured for the data flow which matched with the firewall rule. DrayTek Banner – Please uncheck this box and the following screen will not be shown for the unreachable web page. The default setting is Enabled.
Page 319 Each filter set is composed by 7 filter rules, which can be further defined. After that, in General Setup you may specify one set for call filter and one set for data filter to execute first. Vigor3220 Series User’s Guide...
Page 320: V-1-3 Dos Defense
The default setting for threshold and timeout are 2000 packets per second and 10 seconds, respectively. That means, when 2000 packets per second received, they will be regarded as “attack event” and the session will be Vigor3220 Series User’s Guide...
Page 321 Internet might be dropped. Block TCP flag scan Check the box to activate the Block TCP flag scan function. Any TCP packet with anomaly flag setting is dropped. Those scanning activities include no flag scan, FIN without ACK Vigor3220 Series User’s Guide...
Page 322 All the warning messages related to DoS Defense will be sent to user and user can review it through Syslog daemon. Look for the keyword DoS in the message, followed by a name to indicate what kind of attacks is detected. Vigor3220 Series User’s Guide...
Page 323 Vigor3220 Series User’s Guide...
Page 324: Application Notes
Firewall>>Filter Setup is used as the default setting, we have to create a new rule starting from Filter Rule 2 of Set 2. Access into the web user interface of Vigor router. Open Firewall>>Filter Setup. Click the Set 2 link and choose the Filter Rule 2 button. Vigor3220 Series User’s Guide...
Page 325 Next, set another rule. Just open Firewall>>Filter Setup. Click the Set 2 link and choose the Filter Rule 3 button. Check the box of Check to enable the Filter Rule. Type the comments (e.g., open_ip). Click the Edit button for Source IP. Vigor3220 Series User’s Guide...
Page 326 Type 192.168.1.10 in the field of Start IP, and type 192.168.1.20 in the field of End IP. Then, click OK to save the settings. The computers within the range can access into the Internet. Vigor3220 Series User’s Guide...
Page 327 Pass Immediately. Then, click OK to save the settings. Both filter rules have been created. Click OK. Now, all the settings are configured well. Only the computers with the IP addresses within 192.168.1.10 ~ 192.168.1.20 can access to Internet. Vigor3220 Series User’s Guide...
Page 328: Csm(Central Security Management)
Please note that this action will not introduce any delay in your Web surfing because each of multiple load balanced database servers can handle millions of requests for categorization. Info The priority of URL Content Filter is higher than Web Content Filter. Vigor3220 Series User’s Guide...
Page 329: Web User Interface
Click the number under Index column for settings in detail. There are four tabs IM, P2P, Protocol and Others displayed on this page. Each tab will bring out different items with supported versions that you can choose to disallow people using. Vigor3220 Series User’s Guide...
Page 330 A button under Enable check box allows you to open a pop up window to specify activity for that APP. The profiles configured here can be applied in the Firewall>>General Setup and Firewall>>Filter Setup pages as the standard for the host(s) to follow. Vigor3220 Series User’s Guide...
Page 331: V-2-2 Appe Signature Upgrade
The APPE Enforcement Profile adopted by Vigor router will be treated as the APPE signature. DrayTek will periodically upgrade versions for all of the APPs supported by Vigor router. However, it might be inconvenient for users to upgrade the APP version one by one. This feature is specially designed to offer a quick method to execute APP version upgrade.
Page 332: V-2-3 Url Content Filter Profile
Or you may simply specify the full or partial URL such as “www.sex.com” or “sex.com”. Also the Vigor router will discard any request that tries to retrieve the malicious code. Click CSM and click URL Content Filter Profile to open the profile setting page. Vigor3220 Series User’s Guide...
Page 333 Administration Message. You can set eight profiles as URL content filter. Simply click the index number under Profile to open the following web page. Available settings are explained as follows: Item Description Vigor3220 Series User’s Guide...
Page 334 URL content filtering facility operates properly on a web page that you visited before. Action – This setting is available only when Either : URL Access Control First or Either : Web Feature First is Vigor3220 Series User’s Guide...
Page 335 If the web pages do not match with the specified feature set here, it will be processed with reverse action. Cookie - Check the box to filter out the cookie transmission from inside to outside world to protect the local user's privacy. Vigor3220 Series User’s Guide...
Page 336: V-2-4 Web Content Filter Profile
Please refer to section of creating MyVigor account. WCF adopts the mechanism developed and offered by certain service provider (e.g., DrayTek). No matter activating WCF feature or getting a new license for web content filter, you have to click Activate to satisfy your request.
Page 337 Setup Test Server It is recommended for you to use the default setting, auto-selected. Find more Click it to open http://myvigor.draytek.com for searching another qualified and suitable server. Set to Factory Default Click this link to retrieve the factory settings.
Page 338 Block – Only the log about Block will be recorded in Syslog. All – All the actions (Pass and Block) will be recorded in Syslog. Black/White List Enable – Activate white/black list function for such profile. Group/Object Selections – Click Edit to choose the group or Vigor3220 Series User’s Guide...
Page 339 If the web pages do not match with the specified feature set here, it will be processed with reverse action. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 340: V-2-5 Dns Filter Profile
DNS Filter Local Setting will be applied to DNS query from clients on LAN when router’s DNS server is used. DNS Filter - Check Enable to enable such feature. Syslog - The filtering result can be recorded according to the setting selected for Syslog. Vigor3220 Series User’s Guide...
Page 341 Administration Message will be shown on the screen. Administration Message Type the words or sentences which will be displayed when a web page is blocked by Vigor router. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 342: Application Notes
The website of MyVigor (a server located on http://myvigor.draytek.com) provides several useful services (such as Anti-Spam, Web Content Filter, Anti-Intrusion, and etc.) to filtering the web pages for the sake of protecting your system. To access into MyVigor for getting more information, please create an account for MyVigor.
Page 343 2. Click the Activate link. A login page for MyVigor web site will pop up automatically. 3. Click the link of Create an account now. 4. Check to confirm that you accept the Agreement and click Accept. Vigor3220 Series User’s Guide...
Page 344 5. Type your personal information in this page and then click Continue. 6. Choose proper selection for your computer and click Continue. Vigor3220 Series User’s Guide...
Page 345 8. Check to see the confirmation email with the title of Letter from myvigor.draytek.com. 9. Click the Activate my Account link to enable the account that you created. The following screen will be shown to verify the register process is finished. Please click Login. Vigor3220 Series User’s Guide...
Page 346 11. Now, click Login. Your account has been activated. You can access into MyVigor server to activate the service (e.g., WCF) that you want. 1. Access into http://myvigor.draytek.com. Find the line of Not registered yet?. Then, click the link Click here! to access into next page.
Page 347 2. Check to confirm that you accept the Agreement and click Accept. 3. Type your personal information in this page and then click Continue. 4. Choose proper selection for your computer and click Continue. 5. Now you have created an account successfully. Click START. Vigor3220 Series User’s Guide...
Page 348 6. Check to see the confirmation email with the title of Letter from myvigor.draytek.com. 7. Click the Activate my Account link to enable the account that you created. The following screen will be shown to verify the register process is finished. Please click Login. Vigor3220 Series User’s Guide...
Page 349 UserName and Password. Then type the code in the box of Auth Code according to the value displayed on the right side of it. Now, click Login. Your account has been activated. You can access into MyVigor server to activate the service (e.g., WCF) that you want. Vigor3220 Series User’s Guide...
Page 350: How To Block Facebook Service Accessed By The Users Via Web Content Filter / Url Content Filter
Benefits: Easily and quickly implement the category/website that you want to block. Note: License is required. URL Content Filter, Benefits: Free, flexible for customize webpage. Note: Manual setting (e.g., one keyword for one website.) Make sure the Web Content Filter (powered by Commtouch) license is valid. Vigor3220 Series User’s Guide...
Page 351 Next time when someone accesses facebook via this router, the web page would be blocked and the following message would be displayed instead. II. Via URL Content Filter A. Block the web page containing the word of “Facebook” Vigor3220 Series User’s Guide...
Page 352 In the field of Contents, please type facebook. Configure the settings as the following figure. Open CSM>>URL Content Filter Profile. Click an index number to open the setting page. Configure the settings as the following figure. When you finished the above steps, click OK. Then, open Firewall>>General Setup. Vigor3220 Series User’s Guide...
Page 353 B. Disallow users to play games on Facebook Open Object Settings>>Keyword Object. Click an index number to open the setting page. In the field of Contents, please type apps.facebook. Configure the settings as the following figure. Vigor3220 Series User’s Guide...
Page 354 When you finished the above steps, please open Firewall>>General Setup. Click the Default Rule tab. Choose the profile just configured from the drop down list in the field of URL Content Filter. Now, users cannot open any web page with the word “facebook” inside. Vigor3220 Series User’s Guide...
Page 355: Part Vi Management
Sessions Limit, Bandwidth Limit, and Quality of Servie (QoS). It is a security feature which disallows any IP traffic (except DHCP-related packets) from a particular host until that host has correctly supplied a valid username and password. Vigor3220 Series User’s Guide...
Page 356: System Maintenance
System Status, TR-069, Administrator Password, User Password, Login Page Greeting, Configuration Backup, Syslog /Mail Alert, Time and Date, Management, Reboot System, Firmware Upgrade, Activation and Internal Service User List. Below shows the menu items for System Maintenance. Vigor3220 Series User’s Guide...
Page 357: Web User Interface
Subnet Mask - Display the subnet mask address of the LAN interface. DHCP Server - Display the current status of DHCP server of the LAN interface - Display the assigned IP address of the primary DNS. Vigor3220 Series User’s Guide...
Page 358 Scope - Display the scope of IPv6 address. For example, IPv6 Link Local could only be used for direct IPv6 link. It can't be used for IPv6 internet. Internet Access Mode – Display the connection mode chosen for accessing into Internet. Vigor3220 Series User’s Guide...
Page 359 Last Inform Response Time – Display the time that VigorACS server made a response while receiving Inform message from CPE last time. CPE Client Such information is useful for Auto Configuration Server. Enable/Disable – Allow/Deny the CPE Client to connect with Vigor3220 Series User’s Guide...
Page 360 VigorAP. AP Password – Type the password of the VigorAP that  you want to apply Vigor2925’s TR-069 settings. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 361: Vi-1-3 Administrator Password
Local User – Check the box to enable the local user configuration. Local User List – It displays the username of the local user. User Name – Give a user name for the local user. Vigor3220 Series User’s Guide...
Page 362 LDAP Profile Setup. LDAP Profile Setup – It allows you to create a new LDAP profile. When you click OK, the login window will appear. Please use the new password to access into the web user interface again. Vigor3220 Series User’s Guide...
Page 363: Vi-1-4 User Password
Below shows an example for accessing into User Operation with User Password. 1. Open System Maintenance>>User Password. 2. Check the box of Enable User Mode for simple web configuration to enable user mode operation. Type a new password in the field of New Password and click OK. Vigor3220 Series User’s Guide...
Page 364 4. Log out Vigor router web user interface by clicking the Logout button. 5. The following window will be open to ask for username and password. Type the new user password in the filed of Password and click Login. Vigor3220 Series User’s Guide...
Page 365 Settings to be configured in User Mode will be less than settings in Admin Mode. Only basic configuration settings will be available in User Mode. Info Setting in User Mode can be configured as same as in Admin Mode. Vigor3220 Series User’s Guide...
Page 366: Vi-1-5 Login
Enable Check this box to enable the login customization function. Login Page Title Type a brief description (e.g., Welcome to DrayTek) which will be shown on the heading of the login dialog. Welcome Message and Type words or sentences here. It will be displayed for Bulletin bulletin message.
Page 367 Vigor3220 Series User’s Guide...
Page 368: Vi-1-6 Configuration Backup
Click Backup button to get into the following dialog. Click Save button to open another dialog for saving configuration as a file. In Save As dialog, the default filename is config.cfg. You could give it another name by yourself. Vigor3220 Series User’s Guide...
Page 369 Click Choose File button to choose the correct configuration file for uploading to the router. Click Restore button and wait for few seconds, the following picture will tell you that the restoration procedure is successful. Vigor3220 Series User’s Guide...
Page 370: Vi-1-7 Syslog/Mail Alert
VPN, User Access, Call, WAN, Router/DSL information to Syslog. AlertLog Setup Check Enable to activate function of alert log. AlertLog Port - Type the port number for alert log. The Vigor3220 Series User’s Guide...
Page 371 For viewing the Syslog, please do the following: Just set your monitor PC’s IP address in the field of Server IP Address Install the Router Tools in the Utility within provided CD. After installation, click on the Router Tools>>Syslog from program menu. Vigor3220 Series User’s Guide...
Page 372 From the Syslog screen, select the router you want to monitor. Be reminded that in Network Information, select the network adapter used to connect to the router. Otherwise, you won’t succeed in retrieving information from the router. Vigor3220 Series User’s Guide...
Page 373: Vi-1-8 Time And Date
Advanced – Click it to open a pop up dialog. Use the default time setting or set user defined time for your requirement. Automatically Update Select a time interval for updating from the NTP server. Interval Click OK to save these settings. Vigor3220 Series User’s Guide...
Page 374: Vi-1-9 Snmp
The maximum length of the text is limited to 23 characters. Manager Host IP (IPv4) Set one host as the manager to execute SNMP function. Please type in IPv4 address to specify certain host. Vigor3220 Series User’s Guide...
Page 375 Privacy Algorithm Choose one of the methods listed below as the privacy algorithm. Privacy Password Type a password for privacy. The maximum length of the text is limited to 23 characters. Click OK to save these settings. Vigor3220 Series User’s Guide...
Page 376: Vi-1-10 Management
Available settings are explained as follows: Item Description Router Name Type in the router name provided by ISP. Default: Disable If it is enabled, the function of auto-logout for web user Auto-Logout interface will be disabled. Vigor3220 Series User’s Guide...
Page 377 (master device) sends request packet to Vigor3220, Vigor3220 would send back information to respond the request coming from the external device which is able to manage Vigor3220. After finished the above settings, click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 378 IPs/subnet masks is allowed. Index in IP Object- Type the index number of the IP object profile. Related IP address will appear automatically. After finished the above settings, click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 379 Vigor router. Index in IP Object- Type the index number of the IP object profile. Related IP address will appear automatically. After finished the above settings, click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 380: Vi-1-11 Reboot System
When the system pops up Reboot System web page after you configure web settings, please click Reboot Now to reboot your router for ensuring normal operation and preventing unexpected errors of the router in the future. Vigor3220 Series User’s Guide...
Page 381: Vi-1-12 Firmware Upgrade
Download the newest firmware from DrayTek's web site or FTP site. The DrayTek web site is www.DrayTek.com (or local DrayTek's web site) and FTP site is ftp.DrayTek.com. Click System Maintenance>> Firmware Upgrade to launch the Firmware Upgrade Utility. Choose the right firmware by clicking Select. Then, click Upgrade. The system will upgrade the firmware of the router automatically.
Page 382: Vi-1-13 Activation
Authentication Message As for authentication information of web filter, the process of authenticating will be displayed on this field for your reference. Below shows the successful activation of Web Content Filter: Vigor3220 Series User’s Guide...
Page 383: Vi-1-14 Internal Service User List
For the detailed setting (such as IP address, port number) configuration of internal RADIUS, refer to Applications>>RADIUS/TACACS+. For the detailed setting (such as IP address, port number) configuration of Local 802.1X, refer to LAN>>Wired 802.1X and Wireless LAN>>Security. Vigor3220 Series User’s Guide...
Page 384: Bandwidth Management
This is called per-hop-behavior (PHB). The definition of PHB includes Expedited Forwarding (EF), Assured Forwarding (AF), and Best Effort (BE). AF defines the four classes of delivery (or forwarding) classes and three levels of drop precedence in each class. Vigor3220 Series User’s Guide...
Page 385 However, each node may take different attitude toward packets with high priority marking since it may bind with the business deal of SLA among different DS domain owners. It’s not easy to achieve deterministic and consistent high-priority QoS traffic throughout the whole network with merely Vigor router’s effort. Vigor3220 Series User’s Guide...
Page 386: Web User Interface
To activate the function of limit session, simply click Enable and set the default session limit. Available settings are explained as follows: Item Description Session Limit Enable - Click this button to activate the function of limit session. Vigor3220 Series User’s Guide...
Page 387 All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 388: Vi-2-2 Bandwidth Limit
Allow auto adjustment…- Check this box to make the best utilization of available bandwidth. Limitation List Display a list of specific limitations that you set on this web page. Specific Limitation Start IP - Define the start IP address for limit bandwidth. Vigor3220 Series User’s Guide...
Page 389 Index (1-15) in Schedule Setup - You can type in four sets of time schedule for your request. All the schedules can be set previously in Application >> Schedule web page and you can use the number that you have set in that web page. Vigor3220 Series User’s Guide...
Page 390: Vi-2-3 Quality Of Service
Rule – Allow to configure detailed settings for the selected Class. Service Type – Allow to configure detailed settings for the service type. Enable the First Priority When this feature is enabled, the VoIP SIP/UDP packets will be Vigor3220 Series User’s Guide...
Page 391 You can configure general setup for the WAN interface, edit the Class Rule, and edit the Service Type for the Class Rule for your request. Display an online statistics for quality of service for your reference. This feature is available only when the Quality of Service for WAN interface is enabled. Vigor3220 Series User’s Guide...
Page 392 Check this and set the limited bandwidth ratio on the right Control field. This is a protection of TCP application traffic since UDP application traffic such as streaming video will exhaust lots of bandwidth. Outbound TCP ACK The difference in bandwidth between download and upload Vigor3220 Series User’s Guide...
Page 393 Edit link of that one. After you click the Edit link, you will see the following page. Now you can define the name for that Class. In this case, “Test” is used as the name of Class Index #1. Vigor3220 Series User’s Guide...
Page 394 Service Type drop down list. Those types are predefined in factory. Simply choose the one that you want for using by current QoS. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 395 Edit to open the rule edit page for modification. To add a new service type, edit or delete an existed service type, please click the Edit link under Service Type field. After you click the Edit link, you will see the following page. Vigor3220 Series User’s Guide...
Page 396 For example, in the following illustration, the VoIP packets in LAN go into Vigor router without any header. However, when they go forward to the Server on ISP through Vigor router, all of the packets are tagged with AF (configured in Bandwidth >>QoS>>Class) automatically. Vigor3220 Series User’s Guide...
Page 397: Vi-2-4 App Qos
The protocol listed below is traceable by Vigor router. Each tab offers different types of protocols to fit your request. Untraceable The protocol listed below is not easy to be traced by Vigor router. Each tab offers different types of protocols to fit your Vigor3220 Series User’s Guide...
Page 398 Apply – Click it to make the selected action be applied all of the selected protocols immediately. Action There are many protocols which can be specified with different QoS Class. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 399: Application Notes
Internet connection line? The advanced bandwidth management technology-QoS (Quality of Service) helps you to well allocate the bandwidth upon your demand of Voice, Video, or Data transferring. Let's see how to get the optimum bandwidth per your request by using DrayTek Vigor router as below.
Page 400 In the pop-up window, choose Range Address as the Address Type and type the start IP address and end IP address in relational fields. Click OK to save the settings and exit the window. Click OK again to save the settings. Vigor3220 Series User’s Guide...
Page 401 The class rule for VoIP has been set. Click OK to return to previous page. Do the same steps to add class rules for IPTV and Data/Email with IP addresses as shown below. Vigor3220 Series User’s Guide...
Page 402 VoIP, IPTV and Data/Email. 10. In the Setup page, check the box of Enable the QoS Control. Type 30, 50 and 15 in the boxes for VoIP, IPTV and Data/Email respectively. Check the box of Enable UDP Bandwidth Control. Vigor3220 Series User’s Guide...
Page 403 11. Click OK to save the settings. The class rules for WAN1 are defined as shown below. Vigor3220 Series User’s Guide...
Page 404: Qos Setting Example
The rate of outbound/inbound must be smaller than the real bandwidth to ensure correct calculation of QoS. It is suggested to set the bandwidth value for inbound/outbound as 80% - 85% of physical network speed provided by ISP to maximize the QoS performance. Vigor3220 Series User’s Guide...
Page 405 E-mail using protocol POP3 and SMTP. Click OK to save the settings. Return to previous page. Enter the Name of Index Class #2 by clicking Edit link. In this index, the user will set reserved bandwidth for HTTPS. And click OK. Vigor3220 Series User’s Guide...
Page 406 If the worker has connected to the headquarter using host to host VPN tunnel. (Please refer to Chapter 3 VPN for detail instruction), he may set up an index for it. Enter the Class Name of Index 3. In this index, he will set reserved bandwidth for 1 VPN tunnel. Vigor3220 Series User’s Guide...
Page 407 11. Click Add to open the following window. Check the ACT box, first. 12. Then click Edit of Local Address to set a worker’s subnet address. Click Edit of Remote Address to set headquarter’s IP address. Leave other fields and click OK. Vigor3220 Series User’s Guide...
Page 408: User Management
Filter rules configured under Firewall usually are applied to the host (the one that the router installed) only. With user management, the rules can be applied to every user connected to the router with customized profiles. Vigor3220 Series User’s Guide...
Page 409: Web User Interface
User-Based - If you choose such mode, the router will apply the filter rules configured in User Management>>User Profile to the users. Rule-Based –If you choose such mode, the router will apply Vigor3220 Series User’s Guide...
Page 410 Landing Page Type the information to be displayed on the first web page when the LAN user accessing into Internet via such router. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 411: Vi-3-2 User Profile
To set the user profile, please click any index number link to open the following page. Notice that profile 1 (admin) and profile 2 (Dial-In User) are factory default settings. Profile 2 is reserved for future use. Vigor3220 Series User’s Guide...
Page 412 When a user tries to access Internet through this router, an authentication step must be performed first. The user has to type the password specified here to pass the authentication. When the user passes the Vigor3220 Series User’s Guide...
Page 413 Idle Timeout is set. However, the system will update the time periodically to keep the connection always on. Thus, Idle Timeout will not interrupt Vigor3220 Series User’s Guide...
Page 414 – Click this box to decrease the time quota for such profile. Info A dialog will be popped up to notify how many time remained when a user accesses into Internet through Vigor router successfully. Vigor3220 Series User’s Guide...
Page 415 Default Data Quota – Type the value for the data manually. Internal Services RADIUS / Local 802.1X - Check the box to enable security authenticated via RADIUS / 802.1X server. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 416: Vi-3-3 User Group
All the available user objects that you have created will be shown in this box. Notice that user object, Admin and Dial-In User are factory settings. User defined profiles will be numbered with 3, 4, 5 and so on. Vigor3220 Series User’s Guide...
Page 417: Vi-3-4 User Online Status
Display the login time that such user connects to the router last time. Expired Time Display the expired time of the network connection for the user. Data Quota Display the quota for data transmission. Idle Time Display the idle timeout setting for such profile. Vigor3220 Series User’s Guide...
Page 418 Action Block - can avoid specified user accessing into Internet. Unblock – allow the user to access into Internet. Logout – the user will be logged out forcefully. Vigor3220 Series User’s Guide...
Page 419: Application Notes
If a LAN client who hasn’t passed the authentication opens an external web site in his browser, he will be redirected to the router’s Web authentication interface first. Then, the client is trying to access http://www.draytek.com and but brought to the Vigor router. Since this is an SSL connection, some web browsers will display warning messages.
Page 420 With Microsoft Internet Explorer, you may get the following warning message.  Please press Continue to this website (not recommended).  With Mozilla Firefox, you may get the following warning message. Select I Understand the Risks. Vigor3220 Series User’s Guide...
Page 421 With Chrome browser, you may get the following warning. Click Proceed  anyway. Vigor3220 Series User’s Guide...
Page 422 If the authentication is successful, the client will be redirected to the original web site that he tried to access. In this example, it is http://www.draytek.com . Furthermore, you will get a popped up window as the following. Then you can access the Internet.
Page 423 With the default setup <body stats=1><script language='javascript'> window.location='http://www.draytek.com'</script></body>, you will be redirected to http://www.draytek.com . You may change it if you want. For example, you will get the following welcome message if you enter Login Successful in the Welcome Message table.
Page 424 VPN Remote Dial-in user profile with the same username “chaochen” but a different password “1234”, you will always get error message The username or password you entered is incorrect when you use chaochen/test via Web to do authentication. Vigor3220 Series User’s Guide...
Page 425 Here expired time is “Unlimited” means the Time Quota function is not enabled for this account. After login, this account will not be expired until it is logout. In the Web interface of router, the configuration page of Time Quota is shown as below. Vigor3220 Series User’s Guide...
Page 426 You will get the following message. The expired time is shown after you login. After you run out the available time, you can’t use this account any more until the administrator manually adds additional time for you. Vigor3220 Series User’s Guide...
Page 427 Any modification to the Firewall policy will break down the connections of all current users. They all have to authenticate again for Internet access. Info 2 The administrator may check the current users from User Online Status page. Vigor3220 Series User’s Guide...
Page 428: How To Use Landing
Landing Page is a special feature configured under User Management. It can specify the message, content to be seen or specify which website to be accessed into when users try to access into the Internet by passing the authentication. Here, we take Vigor3220 Series router as an example.
Page 429 Open any browser (e.g., FireFox, Internet Explorer). The logging page will appear and asks for username and password. Please type the correct username and password. Click Login. If the logging is successful, you will see the message of Login Success from the browser you use. Vigor3220 Series User’s Guide...
Page 430 In the field of Landing Page, please type the words as below: “ <body stats=1><script language='javascript'> window.location='http://www.draytek.com'</script></body>” Next, enable the Landing Page function. Open User Management -> User Profile and click one of the index number (e.g., index number 3) links. Vigor3220 Series User’s Guide...
Page 431 In the following page, check the box of Landing page and click OK to save the settings. Open any browser (e.g., FireFox, Internet Explorer). The logging page will appear and asks for username and password. Please type the correct username and password. Vigor3220 Series User’s Guide...
Page 432 Click Login. If the logging is successful, you will be directed into the website of www.draytek.com. Vigor3220 Series User’s Guide...
Page 433: Central Ap Management (Cam)
The parameters configured for Load Balance can help to distribute the traffic for all of the access points registered to Vigor router. Thus, the bandwidth will not be occupied by certain access points. Vigor3220 Series User’s Guide...
Page 434: Web User Interface
Display the number of wireless clients (stations) connecting to the access point. In which, 0/64 means that up to 64 clients are allowed to connect to the access point. But, now no one connects to the access point. Vigor3220 Series User’s Guide...
Page 435: Vi-4-2 Wlan Profile
Display the security mode selected by such wireless profile. Multi-SSID Enable means multiple SSIDs (more than one) are active. Disable means only SSID1 is active. WLAN ACL Display the name of the access control list. Rate Control Display the upload and/or download transmission rate. Vigor3220 Series User’s Guide...
Page 436 Simply choose the device you want from Existing Device field. Click >> to move the device to Selected Device field. Then, click OK. The selected WLAN profile will be applied to the selected access point immediately. Later the access point will reboot. Vigor3220 Series User’s Guide...
Page 437 1. Check the box on the left side of the selected profile. 2. Click the Edit button to display the following page. Info The function of Auto Provision is available for the default WLAN profile. Vigor3220 Series User’s Guide...
Page 438 3. After finished the general settings configuration, click Next to open the following page for 2.4G wireless security settings. Vigor3220 Series User’s Guide...
Page 439 4. After finished the above web page configuration, click Next to open the following page for 5G wireless security settings. 5. When you finished the above web page configuration, click Finish to exit and return to the first page. The modified WLAN profile will be shown on the web page. Vigor3220 Series User’s Guide...
Page 440: Vi-4-3 Ap Maintenance
Display all the available access points managed by Vigor router. Simply click << or >> to move the device(s) between Select Device and Selected Device areas. Selected Device Display the access points that will be applied by such function Vigor3220 Series User’s Guide...
Page 441 OK. After finishing all the settings here, please click OK to perform the action. Vigor3220 Series User’s Guide...
Page 442: Vi-4-4 Ap Map
Edit Click it to modify the geographic settings for the selected AP Map profile. Cancel Click it to cancel the configuration in such page. Set to Factory Default Click the link to clear current page configuration. Vigor3220 Series User’s Guide...
Page 443 PNG are supported) for floor plan. Cancel Click it to cancel the configuration. Next Click it to go to the next configuration page. Click Next. The configuration page with floor plan will be shown as follows. Vigor3220 Series User’s Guide...
Page 444 Choose the signal strength (e.g., 30% in this case) from User Define drop down list. Click Apply. Adjust the AP on the map to find out which place can have the best wireless coverage. At last, click Save. Vigor3220 Series User’s Guide...
Page 445: Vi-4-5 Traffic Graph
LAN-B, daily or weekly for viewing data transmission chart. Click Refresh to renew the graph at any time. The horizontal axis represents time; the vertical axis represents the transmission rate (in kbps). Info Enabling/Disabling such function will also enable/disable the External Devices function. Vigor3220 Series User’s Guide...
Page 446: Vi-4-6 Load Balance
By signal Strength - When the access point is overload (e.g., reaching the limit of station number or limit of network traffic), it will terminate the network connection of the client’s station with the weakest signal. Vigor3220 Series User’s Guide...
Page 447: Vi-4-7 Function Support List
Click the Client tab to list the AP management functions that the Access Points support under different firmware versions. Click the Server tab to list the AP management functions that Vigor router supports under different firmware versions. Vigor3220 Series User’s Guide...
Page 448: External Devices
When you finished the configuration, click OK to save it. Info Only DrayTek products can be detected by this function. Vigor3220 Series User’s Guide...
Page 449: Part Vii Others
USB device connected on Vigor router can be regarded as a server or WAN interface. By way of Vigor router, clients on LAN can access, write and read data stored in USB storage disk with different applications. Vigor3220 Series User’s Guide...
Page 450: Objects Settings
Later, we can select that object/group that can apply it. For example, all the IPs in the same department can be defined with an IP object (a range of IP address). Vigor3220 Series User’s Guide...
Page 451: Web User Interface
Display the name of the object profile. To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Vigor3220 Series User’s Guide...
Page 452 Type the MAC address of the network card which will be controlled. Start IP Address Type the start IP address for Single Address type. End IP Address Type the end IP address if the Range Address type is Vigor3220 Series User’s Guide...
Page 453 If it is checked, all the IP addresses except the ones listed above will be applied later while it is chosen. After finishing all the settings here, please click OK to save the configuration. Below is an example of IP objects settings. Vigor3220 Series User’s Guide...
Page 454: Vii-1-2 Ip Group
Display the name of the group profile. To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Vigor3220 Series User’s Guide...
Page 455: Vii-1-3 Ipv6 Object
You can set up to 64 sets of IPv6 Objects with different conditions. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor3220 Series User’s Guide...
Page 456 Invert Selection If it is checked, all the IPv6 addresses except the ones listed above will be applied later while it is chosen. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 457: Vii-1-4 Ipv6 Group
Display the name of the group profile. To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Vigor3220 Series User’s Guide...
Page 458: Vii-1-5 Service Type Object
You can set up to 96 sets of Service Type Objects with different conditions. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor3220 Series User’s Guide...
Page 459 (>) – the port number greater than this value is available. (<) – the port number less than this value is available for this profile. Vigor3220 Series User’s Guide...
Page 460: Vii-1-6 Service Type Group
This page allows you to bind several service types into one group. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the group profile. Vigor3220 Series User’s Guide...
Page 461 Objects Setting>>Service Type Object will be shown in this box. Selected Service Type Click >> button to add the selected IP objects in this box. Objects After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 462: Vii-1-7 Keyword Object
You can set 200 keyword object profiles for choosing as black /white list in CSM >>URL Web Content Filter Profile. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor3220 Series User’s Guide...
Page 463 Contents. When you browse the webpage, the page with gambling information will be watched out and be passed/blocked based on the configuration on Firewall settings. After finishing all the settings, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 464: Vii-1-8 Keyword Group
Display the name of the group profile. To set a new profile, please do the steps listed below: 1. Click the number (e.g., #1) under Index column for configuration in details. 2. The configuration page will be shown as follows: Vigor3220 Series User’s Guide...
Page 465: Vii-1-9 File Extension Object
All the files with the extension names specified in these profiles will be processed according to the chosen action. Available settings are explained as follows: Item Description Set to Factory Default Clear all profiles. Index Display the profile number that you can configure. Name Display the name of the object profile. Vigor3220 Series User’s Guide...
Page 466 Type a name for this profile. The maximum length of the name you can set is 7 characters. Type a name for such profile and check all the items of file extension that will be processed in the router. Finally, click OK to save this profile. Vigor3220 Series User’s Guide...
Page 467: Vii-1-10 Sms/Mail Service Object
Display the service provider which offers SMS service. To set a new profile, please do the steps listed below: 1. Click the SMS Provider tab, and click the number (e.g., #1) under Index column for configuration in details. Vigor3220 Series User’s Guide...
Page 468 Note that one credit equals to one SMS text message on the standard route. Sending Interval To avoid quota being exhausted soon, type time interval for sending the SMS. 3. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 469 Display the name of this profile. It cannot be modified. Service Provider Type the website of the service provider. Type the URL string in the box under the filed of Service Provider. You have to contact your SMS provider to obtain the exact URL string. Vigor3220 Series User’s Guide...
Page 470 Each item is explained as follows: Item Description Set to Factory Default Clear all of the settings and return to factory default settings. Index Display the profile number that you can configure. Profile Display the name for such mail server profile. Vigor3220 Series User’s Guide...
Page 471 Username – Type a name for authentication. The maximum length of the name you can set is 31 characters. Password – Type a password for authentication. The maximum length of the password you can set is 31 characters. Vigor3220 Series User’s Guide...
Page 472: Vii-1-11 Notification Object
You can set an object with different monitoring situation. To set a new profile, please do the steps listed below: 1. Open Object Setting>>Notification Object, and click the number (e.g., #1) under Index column for configuration in details. Vigor3220 Series User’s Guide...
Page 473 Central VPN Management is checked. Once such profile is enabled, Vigor router system will send out notification to the recipient via SMS. 3. After finishing all the settings here, please click OK to save the configuration. Vigor3220 Series User’s Guide...
Page 474: Application Notes
Choose any index number (e.g., Index 1 in this case) to configure the SMS Provider setting. In the following page, type the username and password and set the quota that the router can send the message out. Vigor3220 Series User’s Guide...
Page 475 Choose any index number (e.g., Index 1 in this case) to configure conditions for sending the SMS. In the following page, type the name of the profile and check the Disconnected and Reconnected boxes for WAN to work in concert with the topic of this paper. Vigor3220 Series User’s Guide...
Page 476 Click OK to save the settings. Later, if one of the WAN connections fails in your router, the system will send out SMS to the phone number specified. If the router has only one WAN interface, the system will send out SMS to the phone number while reconnecting the WAN interface successfully. Vigor3220 Series User’s Guide...
Page 477 URL string of the SMS provider and type the username and password. After clicking OK, the new added SMS provider will be added and will be available for you to specify for sending SMS out. Vigor3220 Series User’s Guide...
Page 478: Usb Application
USB ports on Vigor router are allowed to connect to USB modem. Models of the modems supported by Vigor router can be seen from USB Application>>Modem Support List. For network connection via USB modem, refer to WAN>>Internet Access and WAN>>General Setup for detailed information. Vigor3220 Series User’s Guide...
Page 479: Web User Interface
FTP sessions. The router allows up to 6 FTP sessions connecting to USB storage disk at one time. Default Charset - At present, Vigor router supports four types of character sets. Default Charset is for English based file name. Vigor3220 Series User’s Guide...
Page 480: Vii-2-2 Usb User Management
USB storage disk must type the same username and password configured in this page. Before adding or modifying settings in this page, please insert a USB storage disk first. Otherwise, an error message will appear to warn you. Click index number to access into configuration page. Vigor3220 Series User’s Guide...
Page 481 ON, you cannot type any new folder name in this field. Only “/” can be used in such case. You can click to open the following dialog to add any new folder which can be specified as the Home Folder. Vigor3220 Series User’s Guide...
Page 482: Vii-2-3 File Explorer
Click this icon to return to the upper directory. Back Click this icon to add a new folder. Create Current Path Display current folder. Upload Click this button to upload the selected file to the USB Vigor3220 Series User’s Guide...
Page 483: Vii-2-4 Usb Device Status
Username It displays the username that user uses to login to the FTP server. When you insert USB storage disk into the Vigor router, the system will start to find out such device within several seconds. Vigor3220 Series User’s Guide...
Page 484: Vii-2-5 Modem Support List
Such page provides the information about the brand name and model name of the USB modems which are supported by Vigor router. Vigor3220 Series User’s Guide...
Page 485: Vii-2-6 Smb Client Support List
SMB Client Support List provides the test status information for applications with file sharing operated under different platforms. Vigor3220 Series User’s Guide...
Page 486: Application Notes
Plug the USB device to the USB port on the router. Open USB Application>>USB Device Status. Make sure Disk Connected appears on the Connection Status as the figure shown below: Then, please open USB Application >> USB General Settings to enable SMB service. Vigor3220 Series User’s Guide...
Page 487 "user1" and assign authorities “Read”, “Write” and “List” to it. Click OK to save the configuration. Make sure the FTP service is running properly. Please open a browser and type ftp://192.168.1.1. Use the account "user1" to login. Vigor3220 Series User’s Guide...
Page 488 Now, users in LAN of Vigor3220 can access into the USB storage device by typing ftp://192.168.1.1 on any browser. They can add or remove files / directories, depending on the Access Rule for FTP account settings in USB Application >>USB User Management. Vigor3220 Series User’s Guide...
Page 489: Part Viii Troubleshooting
This part will guide you to solve abnormal situations if you cannot access into the Internet after installing the router and finishing the web configuration. Vigor3220 Series User’s Guide...
Page 490: Viii-1Diagnostics
Backing to factory default setting if necessary.  If all above stages are done and the router still cannot run normally, it is the time for you to contact your dealer or DrayTek technical support for advanced help. Vigor3220 Series User’s Guide...
Page 491: Web User Interface
(e.g., PPPoE) is triggered by a package sending from the source IP address. Available settings are explained as follows: Item Description Decoded Format It shows the source IP address (local), destination IP (remote) address, the protocol and length of the package. Refresh Click it to reload the page. Vigor3220 Series User’s Guide...
Page 492: Viii-1-2 Routing Table
Click Diagnostics and click Routing Table to open the web page. Available settings are explained as follows: Item Description Refresh Click it to reload the page. Vigor3220 Series User’s Guide...
Page 493: Viii-1-3 Arp Cache Table
The table shows a mapping between an Ethernet hardware address (MAC Address) and an IPv6 address. This information is helpful in diagnosing network problems, such as IP address conflicts, etc. Click Diagnostics and click IPv6 Neighbour Table to open the web page. Vigor3220 Series User’s Guide...
Page 494: Viii-1-5 Dhcp Table
Click Diagnostics and click DHCP Table to open the web page. Available settings are explained as follows: Item Description Index It displays the connection item number. IP Address It displays the IP address assigned by this router for specified Vigor3220 Series User’s Guide...
Page 495: Viii-1-6 Nat Sessions Table
It indicates the temporary port of the router used for NAT. Peer IP:Port It indicates the destination IP address and port of remote host. Interface It displays the representing number for different interface. Refresh Click it to reload the page. Vigor3220 Series User’s Guide...
Page 496: Viii-1-7 Dns Cache Table
Click OK to enable such function. It means when the TTL value of each DNS query reaches the threshold of the value specified here, the corresponding record will be deleted from router’s Cache automatically. Vigor3220 Series User’s Guide...
Page 497: Viii-1-8 Ping Diagnosis
Use the drop down list to choose the WAN interface that you want to ping through or choose Unspecified to be determined by the router automatically. Ping to Use the drop down list to choose the destination that you want to ping. Vigor3220 Series User’s Guide...
Page 498 Type the IPv6 address that you want to ping. Click this button to start the ping work. The result will be displayed on the screen. Clear Click this link to remove the result on the window. Vigor3220 Series User’s Guide...
Page 499: Viii-1-9 Data Flow Monitor
Description Enable Data Flow Monitor Check this box to enable this function. Refresh Seconds Use the drop down list to choose the time interval of refreshing data flow that will be done by the system automatically. Vigor3220 Series User’s Guide...
Page 500 Peak means the highest peak value detected by the router in data transmission. Speed means line speed specified in WAN>>General Setup. If you do not specify any rate at that page, here will display Auto for instead. Vigor3220 Series User’s Guide...
Page 501: Viii-1-10 Traffic Graph
WAN1/WAN2/WAN3/WAN4/WAN5 Bandwidth chart, the numbers displayed on vertical axis represent the numbers of the transmitted and received packets in the past. For Sessions chart, the numbers displayed on vertical axis represent the numbers of the NAT sessions during the past. Vigor3220 Series User’s Guide...
Page 502: Viii-1-11 Trace Route
Run. The result of route trace will be shown on the screen. Available settings are explained as follows: Item Description IPv4 / IPv6 Click one of them to display corresponding information for it. Trace through Use the drop down list to choose the interface that you want Vigor3220 Series User’s Guide...
Page 503: Viii-1-12 Syslog Explorer
Always record the new event – only the newest events will be recorded by the system. Time Display the time of the event occurred. Message Display the information for each event. Vigor3220 Series User’s Guide...
Page 504: Viii-1-13 Ipv6 Tspc Status
Refresh Click this link to refresh this page manually. All of the routers under the same DARP (DrayTek Address resolution Protocol) group can be viewed in such page. However, only partial information of the router status will be displayed. Vigor routers with the following condtions will be treated as the same DARP group:...
Page 505 Config Sync Status “Not Ready” means configuration synchronization is unable to execute, or configuration synchronization is disabled, or synchronization initialization executes but fails. “Ready” means configuration synchronization is ready to execute. “Progressing” means configuration synchronization is Vigor3220 Series User’s Guide...
Page 506: Viii-1-15 Authentication Information
When the mouse cursor moves to the name link under User Name, the connection message (including authentication failed information) about internal RADIUS or local 802.1X service will be shown by a popped up dialog box. This page will display the complete authentication log information. Vigor3220 Series User’s Guide...
Page 507 Always record the new event – only the newest events  will be recorded by the system. Time Display the time the user authenticated by Vigor2860 series. Message Display authentication information done by Vigor2860 series. Vigor3220 Series User’s Guide...
Page 508: Viii-1-16 Dos Flood Table
Moreover, IP address detected and suspected to attack the network system can be blocked shortly by clicking the Block button shown on pages of SYN Flood, UDP Flood and ICMP Flood. Info The icon - - means there is something wrong (e.g., attacking the system) with that IP address. Vigor3220 Series User’s Guide...
Page 509 IP list in the right frame will be blocked by Vigor system permanatly. Remove – It is used to remove selected IP address from the Blocking IP List. Refresh Click this link to refresh current page. Vigor3220 Series User’s Guide...
Page 510: Viii-2 Checking If The Hardware Status Is Ok Or Not
Turn on the router. Make sure the ACT LED blink once per second and the correspondent LAN LED is bright. If not, it means that there is something wrong with the hardware status. Simply back to “1.2 Hardware Installation” to execute the hardware installation again. And then, try again. Vigor3220 Series User’s Guide...
Page 511: Viii-3 Checking If The Network Connection Settings On Your Computer Is Ok Or Not
Open All Programs>>Getting Started>>Control Panel. Click Network and Sharing Center. In the following window, click Change adapter settings. Icons of network connection will be shown on the window. Right-click on Local Area Connection and click on Properties. Vigor3220 Series User’s Guide...
Page 512 Select Internet Protocol Version 4 (TCP/IP) and then click Properties. Select Obtain an IP address automatically and Obtain DNS server address automatically. Finally, click OK. Vigor3220 Series User’s Guide...
Page 513 Double click on the current used Mac OS on the desktop. Open the Application folder and get into Network. On the Network screen, select Using DHCP from the drop down list of Configure IPv4. Vigor3220 Series User’s Guide...
Page 514: Viii-4 Pinging The Router From Your Computer
Open the Application folder and get into Utilities. Double click Terminal. The Terminal window will appear. Type ping 192.168.1.1 and press [Enter]. If the link is OK, the line of “64 bytes from 192.168.1.1: icmp_seq=0 ttl=255 time=xxxx ms” will appear. Vigor3220 Series User’s Guide...
Page 515 Vigor3220 Series User’s Guide...
Page 516: Viii-5 Checking If The Isp Settings Are Ok Or Not
 If the problem of LEDs cannot be solved by the above measures, please contact with the nearest reseller, or send an e-mail to DrayTek FAE for technical support.  Check if the settings offered by ISP are configured well or not.
Page 517: Viii-6 Problems For 3G/4G Network Connection
PIN code and try again. If it still fails, it might be the compliance problem of system. Please open DrayTek Syslog Tool to capture the connection information (WAN Log) and send the page (similar to the following graphic) to the service center of DrayTek.
Page 518: Viii-7 Backing To Factory Default Setting If Necessary
Go to System Maintenance and choose Reboot System on the web page. The following screen will appear. Choose Using factory default configuration and click Reboot Now. After few seconds, the router will return all the settings to the factory settings. Vigor3220 Series User’s Guide...
Page 519: Viii-8 Contacting Draytek
If the router still cannot work correctly after trying many efforts, please contact your dealer for further help right away. For any questions, please feel free to send e-mail to support@DrayTek.com. Vigor3220 Series User’s Guide...
Page 520: Appendix I: Vlan Applications On Vigor Router
VLAN helps you to solve these situations, and DrayTek’s products support bellow two popular types:...
Page 521 P1 and P2 are doing NAT flow to access to the internet, but P3 and P4 will forward the packets between WAN and LAN ports directly. So far, there are two kinds of open system on Vigor router. One is DrayOS, which is DrayTek owned, and another is Linux-like which customized by DrayTek from OpenWRT. Here DrayOS system is going to be introduced to you because it is the most stable and superfast booting system in DrayTek products.
Page 522 Vigor3220 Series User’s Guide...
Page 523  Multi Subnet (VLAN of LAN) Vigor3220 Series User’s Guide...
Page 524 Port-based is able to extend the wired ports by installing a cheaper dumb switch as many as you need, but Tag-based offers you a flexible and well-managed network. The networks are isolated, secured and reduce the broadcasting storm effectively in each of networks with VLAN.  Guest Network Vigor3220 Series User’s Guide...
Page 525 Tag enabled.  Triple Play (Multi-WAN) NAT mode with VLAN Following settings, the set-top box (STB) is able to attach with any LAN port. Video streaming which your ISP provided will be played on your monitor. Vigor3220 Series User’s Guide...
Page 526 Vigor3220 Series User’s Guide...
Page 527 Set-top box (STB) or the other kinds of media devices are able to attach with Port4 or Port5 of LAN. Those devices that attached with Port4 or Port5 are able to access the services network directly which your ISP provided. Vigor3220 Series User’s Guide...
Page 528 This page is left blank. Vigor3220 Series User’s Guide...
Page 529: Part Ix Draytek Tools
Vigor3220 Series User’s Guide...
Page 530: Smartvpn Client
DrayTek has been the world-leading company to integrate VPN with Vigor SOHO routers to serve professionals and business customers with secure data transactions over Internet. The facilities of VPN let businesses are able to receive and send data over Internet with secure tunnels.
Page 531: Ix-1-2 How To Use Smartvpn Android App To Establish Ssl Vpn Tunnel
On VPN server, create a SSL user account. Please refer to “How to Set up SSL VPN” on www.draytek.com for detailed instructions. Download the APP from Google play, and run the APP. Click “+” to add a new profile. Vigor3220 Series User’s Guide...
Page 532 If you check “Use default gateway on remote network”, all the traffic of this smart device will be forwarded to the remote gateway. Tap the profile bar to establish SSL VPN tunnel. Enter Username and Password, then tap Dial. Vigor3220 Series User’s Guide...
Page 533 When the tunnel is up, the profile will turn green. Tap the bar again will disconnect the tunnel. Tap the pencil icon to edit or remove the profile. Vigor3220 Series User’s Guide...
Page 534 This page is left blank. Vigor3220 Series User’s Guide...
Page 535: Part X Telnet Commands
Vigor3220 Series User’s Guide...
Page 536: Accessing Telnet Of Vigor3220
If you have changed the default, enter the current IP address of the router. Next, type admin/admin for Account/Password. Then, type ?. You will see a list of valid/common commands depending on the router that your use. Vigor3220 Series User’s Guide...
Page 537 For users using previous Windows system (e.g., 2000/XP), simply click Start >> Run and type Telnet 192.168.1.1 in the Open box as below. Next, type admin/admin for Account/Password. And, type ? to get a list of valid/common commands. Vigor3220 Series User’s Guide...
Page 538 IM (Instant Messenger)/P2P (Peer to Peer) application. “csm appe prof “ is used to configure the APP Enforcement Profile name. Such profile will be applied in Default Rule of Firewall>>General Setup for filtering. csm appe prof -i INDEX [-v | -n NAME|setdefault] Vigor3220 Series User’s Guide...
Page 539 1: Pass. All of the applications meet the CSM rule will be passed. >csm appe set -i 1 -a 1 1 Profile 1 - : <NULL> action set to Pass. > It is used to display group (IM/P2P/Protocol and Others) information APP Enforcement Profile. Vigor3220 Series User’s Guide...
Page 540 > csm appe config -v 1 -m Group Type Index Name Enable vance Enable Advance abbreviation: Message, File Transfer, Game, Conference, and Other Advance abbreviation: : M, F, G, C, and O ------------------------------------------------------------------- OTHERS TUNNEL DNSCrypt Disable Vigor3220 Series User’s Guide...
Page 541 System Maintenance>>SysLog/Mail Alert Setup (in which, the box of APPE Signature is checkd under Enable E-Mail Alert). csm appe email [-e|-d|-s] Enable notification e-mail mechanism. Disable notification e-mail mechanism. Send an example e-mail. > csm appe email -e Enable APPE email. Vigor3220 Series User’s Guide...
Page 542 B: Block, A: All, N: None Specify the Administration Message, less then 255 characters Set URL Access Control part. Set Web Feature part. > csm ucf obj 1 -n game -l B Profile Index: 1 Profile Name:[game] Vigor3220 Series User’s Guide...
Page 543 D: Disable the function. Set the keyword object. KEY_WORD_Object_Index Specify the index number of the object profile. Set the keyword group. KEY_WORD_Group_Index Specify the index number of the group profile. > csm ucf obj 1 uac -i E Vigor3220 Series User’s Guide...
Page 544 Profile Name:[game] Log:[none] Priority Select : [Bundle : Pass] [ ]Enable URL Access Control Action:[block] [v]Prevent web access from IP address. No Obj NO. Object Name --- -------- --------------------------------- No Grp NO. Group Name --- -------- --------------------------------- Vigor3220 Series User’s Guide...
Page 545 Log:[none] Priority Select : [Bundle : Pass] [ ]Enable URL Access Control Action:[block] [v] Prevent web access from IP address. No Obj NO. Object Name --- -------- --------------------------------- No Grp NO. Group Name --- -------- --------------------------------- Vigor3220 Series User’s Guide...
Page 546 P: Pass. The web access meets the web feature will be passed. Set the profile name. PROFILE_NAME Specify the name of the profile (less than 16 characters) It means the log type of the profile. They are: P: Pass, Vigor3220 Series User’s Guide...
Page 547 Transportation, Compromised, Dating & Personals, , Education, Finance, Government,Health & Medcine, News, Non-profits & NGOs, Personal Sites,Politics, Real Estate, Rligion, Restaurants & Dining,Shopping, Translators, General, Cults,Greetig cards, Image Sharing, Network Errors, Parked Domains, Private IP Addresses) Vigor3220 Series User’s Guide...
Page 548 N|P|B|A csm dnsf service WCF_PROFILE csm dnsf service_ucf UCF_PROFILE csm dnsf time CACHE_TIME csm dnsf blockpage show/on/off csm dnsf profile_show csm dnsf profile_edit INDEX csm dnsf profile_edit INDEX -n PROFILE_NAME csm dnsf profile_edit INDEX -l N|P|B|A Vigor3220 Series User’s Guide...
Page 549 1 to 24; 1 is one hour, 2 is two hours, and so on ...) for DNS filter. > csm dnsf service 2 dns service set up!!! >csm dnsf service 3 wcf profile 3 is empty..>csm dnsf cachetime 1 Vigor3220 Series User’s Guide...
Page 550 View the configuration of DoS defense system. Deactivate the DoS defense system. Activate the DoS defense system. Enable the defense function for a specific attack and set its parameter(s). ATTACK_F Specify the name of flooding attack(s) or portscan, e.g., synflood, Vigor3220 Series User’s Guide...
Page 551 Disable the defense function for a specific attack(s). >dos –A The Dos Defense system is Activated >dos –s synflood 50 10 Synflood is enabled! Threshold=50 <pke/sec> timeout=10 <pke/sec> Vigor3220 Series User’s Guide...
Page 552 IP address here for WAN port. -n <netmask> It means to assign netmask for WAN connection. You have to type 255.255.255.xxx (x is changeable) as the netmask for WAN port. -g <gateway> Assign gateway IP for such WAN connection. Vigor3220 Series User’s Guide...
Page 553 WAN1 Password set successful WAN1 PPP Authentication Type set to PAP/CHAP WAN1 Idle timeout set to always-on WAN1 Gateway IP set to 0.0.0.0 > internet -V WAN1 Internet Mode:PPPoE ISP Name: tcom Username: username Authentication: PAP/CHAP Vigor3220 Series User’s Guide...
Page 554 Specify an IP address. The system will set the one that you specified as the public subnet IP address. > ip pubaddr ? % ip addr <public subnet IP address> % Now: 192.168.0.1 > ip pubaddr 192.168.2.5 % Set public subnet IP address done !!! Vigor3220 Series User’s Guide...
Page 555 > ip aux add 192.168.1.65 1 % 192.168.1.65 has added in index 3. When you type ip aux?, the current auxiliary WAN IP Address table will be shown as the following: Index no. Status IP address IP pool ---------------------------------------------- Enable 172.16.3.229 Vigor3220 Series User’s Guide...
Page 556 % Set IP netmask OK !!! ARP displays the matching condition for IP and MAC address. ip arp add [IP address] [MAC address] [LAN or WAN] ip arp del [IP address] [LAN or WAN] ip arp flush Vigor3220 Series User’s Guide...
Page 557 -e [1 or 0] -w [wan unmber] -c [option number] -x "[option value]" ip dhcpc option -e [1 or 0] -w [wan unmber] -c [option number] -a [option value] ip dhcpc option -u [idx unmber] Vigor3220 Series User’s Guide...
Page 558 This command allows users to ping IP address of WAN1/WAN2 for verifying if the WAN connection is OK or not. ip ping [IP address] [WAN1/WAN2] Parameter Description IP address It means the WAN IP address. WAN1/WAN2 It means the WAN interface that the above IP address passes Vigor3220 Series User’s Guide...
Page 559 This command allows users to access specified device by telnet. ip telnet [IP address][Port] Parameter Description IP address Type the WAN or LAN IP address of the remote device. Port Type a port number (e.g., 23). Available settings: 0 ~65535. > ip telnet 172.17.3.252 23 Vigor3220 Series User’s Guide...
Page 560 3: PVC3,4: PVC4,5: PVC5 -e <0/1> 0: disable, 1: enable Now status: WAN[1] Rip Protocol disable WAN[2] Rip Protocol disable WAN[3] Rip Protocol disable WAN[4] Rip Protocol disable WAN[5] Rip Protocol disable > ip wanrip 5 -e 1 Vigor3220 Series User’s Guide...
Page 561 It means current IP range for CNC Network. default Set WAN1/WAN2/off as current default route. clean Clean all of the route settings. 1: Enable the function. 0: Disable the function. > ip route add 172.16.2.0 255.255.255.0 172.16.2.4 3 static Vigor3220 Series User’s Guide...
Page 562 > ip route status Codes: C - connected, S - static, R - RIP, * - default, ~ - private 192.168.9.0/ 255.255.255.0 is directly connected, DMZ 192.168.1.0/ 255.255.255.0 is directly connected, LAN1 172.16.2.0/ 255.255.255.0 via 172.16.2.4, WAN1 Vigor3220 Series User’s Guide...
Page 563 The default value is 125000 ms Current Setting is:130000 ms > ip igmp_proxy set % ip igmp_proxy [set|reset|wan|status], IGMP Proxy is ON > ip igmp_proxy status %% ip igmp_proxy [set|reset|wan|status], IGMP Proxy is ON %%% igmp_proxy WAN: 239.255.255.250 state=1 239.255.255.250 timer=0 Vigor3220 Series User’s Guide...
Page 564 It means the MAC address of the device that you want to specify. >ip dmz ? % ip dmz <mac>, now : 00-00-00-00-00-00 > ip dmz 11-22-33-44-55-66 > ip dmz ? % ip dmz <mac>, now : 11-22-33-44-55-66 Vigor3220 Series User’s Guide...
Page 565 IP session block works. ip session on ip session off ip session default [num] ip session defaultp2p [num] ip session status ip session show ip session timer [num] ip session [block/unblock][IP] ip session [add/del][IP1-IP2][num][p2pnum] Parameter Description Vigor3220 Series User’s Guide...
Page 566 This command allows users to set maximum bandwidth limit number for the specified IP. ip bandwidth on ip bandwidth off ip bandwidth default [tx_rate][rx_rate] ip bandwidth status ip bandwidth show ip bandwidth [add/del] [IP1-IP2][tx][rx][shared] Parameter Description Turn on the IP bandwidth limit. Vigor3220 Series User’s Guide...
Page 567 Turn off all the bindmac policy. strict_on It means that only those IP address in IP bindmac policy table can access into network. show Display the IP address and MAC address of the pair of binded one. Vigor3220 Series User’s Guide...
Page 568 Delete all the IP bindmac settings. > ip bindmac add 192.168.1.46 00:50:7f:22:33:55 just for test > ip bindmac show ip bind mac function is turned ON IP : 192.168.1.46 bind MAC : 00-50-7f-22-33-55 Comment : just Vigor3220 Series User’s Guide...
Page 569 IP address. ip_range: Indicates a range of IP addresses. ip_subnet: Indicates the IP subnet. domain: Indicates the domain name. -3 [any/range] Specify the destination port mode. Range: Indicate a range of port number. Vigor3220 Series User’s Guide...
Page 570 It means to specify the interface for failover. Value: Avaialbe interfaces include, NO_FAILOVER, Default_WAN, Policy1 ~ Policy60 LAN1 ~ LAN8 IP_Routed_Subnet, DMZ_Subnet, WAN1 ~ WAN5, VPN_PROFILE_1 ~ VPN_PROFILE_100, WAN_1_IP_ALIAS_1 ~ WAN_4_IP_ALIAS_8 -b [value] It means “failback”. Vigor3220 Series User’s Guide...
Page 571 "policy 1" was inactive and there was no failover setting > ip policy_rt -i -1 -o add -1 range -s 192.168.1.10 -S 192.168.1.20 -2 ip_range –d 202.211.100.10 -D 202.211.100.20 -g 202.211.100.1 -I WAN2 Vigor3220 Series User’s Guide...
Page 572 % Profile: test % Domain Name: % -------- Address Mapping Table -------- % Not Set Address Mapping. > This command is used to set LAN DNS profile for conditional DNS forwarding. ip dnsforward [-<command> <parameter> | ... ] Vigor3220 Series User’s Guide...
Page 573 Set domain name. -p <profile name> Set profile name for LAN DNS. Reset the settings for selected profile. > ip dnsforward -i 1 -n ftp.drayTek.com % Configure Set1's DomainName:ftp.drayTek.com > ip dnsforward -i 1 -a 172.16.1.1 % Configure Set1's IP:172.16.1.1 >...
Page 574 0: the parameter related to the request will not be displayed. > ip6 dhcp req_opt WAN2 -S 1 > ip6 dhcp req_opt WAN2 -r 1 > ip6 dhcp req_opt WAN2 -a % Interface WAN2 is set to request following DHCPv6 options: sip name Vigor3220 Series User’s Guide...
Page 575 [-<command> <parameter>| ... ] Parameter Description server It means the dhcp server settings. [<command> The available commands with parameters are listed below. <parameter>|…] […] means that you can type in several commands in one line. Vigor3220 Series User’s Guide...
Page 576 WAN2 n=3: WAN3 n=X: WANx -M n M means to set Internet Access Mode (Mandatory) and n means different modes (represented by 0 – 5) n= 0: Offline, n=1: PPP, n=2: TSPC, n=3: AICCU, n=4: DHCPv6, Vigor3220 Series User’s Guide...
Page 577 -d [inet6_addr] [LAN|WAN1|WAN2] ip6 neigh -a [inet6_addr] [-N LAN|WAN1|WAN2] Parameter Description It means to add a neighbour. It means to delete a neighbour. It means to show neighbour status. inet6_addr Type an IPv6 address eth_addr Type submask address. Vigor3220 Series User’s Guide...
Page 578 Neighbour 2001:2222:3333::1111 successfully added! > ip6 neigh -a I/F ADDR STATE ------------------------------------------------------------------------- LAN FF02::1 33-33-00-00-00-01 CONNECTED WAN2 2001:5C0:1400:B::10B8 00-00-00-00-00-00 CONNECTED WAN2 2001:2222:3333::1111 00-00-00-00-00-00 CONNECTED WAN2 2001:2222:6666::1111 00-00-00-00-00-00 CONNECTED WAN2 :: 00-00-00-00-00-00 CONNECTED LAN :: NONE > Vigor3220 Series User’s Guide...
Page 579 It means the gateway of the router. LAN|WAN1|WAN2|iface# It means to specify LAN or WAN interface for such address. > ip6 route -s FE80::250:7FFF:FE12:500 16 FE80::250:7FFF:FE12:100 LAN Route FE80::250:7FFF:FE12:500/16 successfully added! > ip6 route -a LAN Vigor3220 Series User’s Guide...
Page 580 Receive reply from 2001:4860:4860::8888, time=330ms Receive reply from 2001:4860:4860::8888, time=330ms Receive reply from 2001:4860:4860::8888, time=330ms Receive reply from 2001:4860:4860::8888, time=330ms Receive reply from 2001:4860:4860::8888, time=330ms Packets: Sent = 5, Received = 5, Lost = 0 <% loss> > Vigor3220 Series User’s Guide...
Page 581 > ip6 tspc 2 Local Endpoint v4 Address : 111.243.177.223 Local Endpoint v6 Address : 2001:05c0:1400:000b:0000:0000:0000:10b9 Router DNS name : 8886666.broker.freenet6.net Remote Endpoint v4 Address :81.171.72.11 Remote Endpoint v6 Address : 2001:05c0:1400:000b:0000:0000:0000:10b8 Tspc Prefixlen : 56 Tunnel Broker: Amsterdam.freenet.net Vigor3220 Series User’s Guide...
Page 582 Description list It means to show the setting information of the access list. status It means to show the status of IPv6 management. It means to add an IPv6 address which can be used to execute Vigor3220 Series User’s Guide...
Page 583 It means the connection interface. 0=LAN1 1=WAN1 2=WAN2 > ip6 online 0 % LAN 1 online status : % Interface : UP % IPv6 DNS Server: :: Static % IPv6 DNS Server: :: Static % IPv6 DNS Server: :: Static Vigor3220 Series User’s Guide...
Page 584 > ip6 aiccu subnet add 2 2001:1111:0000::1111 64 > ip6 aiccu 2 Status: Connecting >ip6 aiccu subnet show 2 IPv6 WAN2 AICCU Subnet Prefix Config: 2001:1111::1111/64 > This command allows you to set IPv6 settings for NTP (Network Time Protocols) server. Vigor3220 Series User’s Guide...
Page 585 > ipf view -V -c -d ipf: IP Filter: v3.3.1 (1824) Kernel: IP Filter: v3.3.1 Running: yes Log Flags: 0x80947278 = nonip Default: pass all, Logging: available This command is used to set general rule for firewall. Vigor3220 Series User’s Guide...
Page 586 Setting saved. > ipf set -d 2 #set data filter start from set 2 Setting saved. > ipf set -v Call Filter: Enable (Start Filter Set = 1) Data Filter: Enable (Start Filter Set = 2) Vigor3220 Series User’s Guide...
Page 587 –s u <Address Type> <Start IP It means to configure source IP address including address type, Address> <End IP Address> | start IP address, end IP address and address mask. <Address Mask> u – It means “user defined”. Vigor3220 Series User’s Guide...
Page 588 2 – Port OP, range is 0-3, 0:==, 1:!=, 2:>, 3:< 4 – Port range of the Start Port Number, range is 1-65535. 6 – Port range of the End Port Number, range is 1-65535. It means the Filter action you can specify. 0 –Pass Immediately, Vigor3220 Series User’s Guide...
Page 589 It is used to show current filter/rule settings. > ipf rule 2 1 -e 1 -s "o 1" -d "o 2" -S "o 1" -F 2 > ipf rule 2 1 -v Filter Set 2 Rule 1: Vigor3220 Series User’s Guide...
Page 590 This command is used to set and view flowtrack sessions. ipf flowtrack set [-re] ipf flowtrack view [-f] ipf flowtrack [-i][-p][-t] Parameter Description It means to refresh the flowtrack. It means to enable or disable the flowtrack. 0: Disable 1: Enable Vigor3220 Series User’s Guide...
Page 591 It means to show the IP filter log. It means to show the flush log buffer. a: flush all logs c: flush the call log f: flush the IP filter log w: flush the WAN log It means to show this usage help. Vigor3220 Series User’s Guide...
Page 592 This command allows users to set FTP port for management. mngt ftpport [FTP port] Parameter Description FTP port It means to type the number for FTP port. The default setting is > mngt ftpport 21 % Set FTP server port to 21 done. Vigor3220 Series User’s Guide...
Page 593 Telnet port It means to type the number for telnet port. The default setting is > mngt telnetport 23 % Set Telnet server port to 23 done. This command allows users to set SSH port for management. Vigor3220 Series User’s Guide...
Page 594 All PING packets will be forwarded from LAN PC to Internet. All PING packets will be blocked from LAN PC to Internet. viewlog It means to display a log of ping action, including source MAC and source IP. Vigor3220 Series User’s Guide...
Page 595 It means to clear the log of ping action. > mngt noping off No Ping Packet Out is OFF!! Vigor3220 Series User’s Guide...
Page 596 Description status It means to display current setting for your reference. enable It means to allow the system administrators to login from the Internet. disable It means to deny the system administrators to login from the Vigor3220 Series User’s Guide...
Page 597 It means to flush all of the settings. It means to restore the factory default settings. It means to view current settings. It means to get the usage of such command. > mngt lanaccess -e 1 > mngt lanaccess -s FTP,TELNET Vigor3220 Series User’s Guide...
Page 598 This command allows you to specify that the system administrator can login from a specific host or network. A maximum of three IPs/subnet masks is allowed. mngt accesslist list mngt accesslist add [index][ip addr][mask] mngt accesslist remove [index] mngt accesslist flush Vigor3220 Series User’s Guide...
Page 599 It means to set the IPv4 address of the host that will receive the trap community. -T <seconds> It means to set the trap timeout <0~999>. It means to list SNMP setting. > mngt snmp -e 1 -g draytek -s DK -m 192.168.1.1 -t trapcom -n 10.20.3.40 Vigor3220 Series User’s Guide...
Page 600 -T 88 SNMP Agent Turn on!!! Get Community set to draytek Set Community set to DK Manager Host IP set to 192.168.1.1 Trap Community set to trapcom Notification Host IP set to 10.20.3.40 Trap Timeout set to 88 seconds This command is used to configure multi-subnet.
Page 601 This setting will take effect after rebooting. Please use "sys reboot" command to reboot the router. This command is used to display current status of subnet. msubnet status [2/3/4/5/6] Parameter Description 2/3/4/5/6 It means LAN interface. 2=LAN2 3=LAN3 4=LAN4 5=LAN5 6=LAN6 Vigor3220 Series User’s Guide...
Page 602 2=LAN2 3=LAN3 4=LAN4 5=LAN5 6=LAN6 On/Off On – It means the subnet will be configured for NAT usage. Off - It means the subnet will be configured for Routing usage. > > msubnet nat 2 off Vigor3220 Series User’s Guide...
Page 603 [2/3/4] [IP counts] Parameter Description 2/3/4/5/6 It means LAN interface. 2=LAN2 3=LAN3 4=LAN4 5=LAN5 6=LAN6 IP counts Specify a total number of IP address allowed for each LAN interface. The available range is from 0 to 220. Vigor3220 Series User’s Guide...
Page 604 LAN1 LAN2 LAN3 LAN4 LAN5 LAN6 % LAN1 % LAN2 % LAN3 % LAN4 % LAN5 % LAN6 > This command is used to configure a starting IP address for DCHP. msubnet startip [2/3/4/5/6] [Gateway IP] Vigor3220 Series User’s Guide...
Page 605 This setting will take effect after rebooting. Please use "sys reboot" command to reboot the router. > msubnet pppip ? % msubnet pppip <2/3/4/5/6> <Start IP> % Now: LAN2 192.168.2.250; LAN3 192.168.3.200; LAN4 192.168.4.200; LAN5 192.168.5.200; LAN6 192.168.6.200 Vigor3220 Series User’s Guide...
Page 606 % Now: LAN2 1; LAN3 0; LAN4 0; LAN5 0; LAN6 0 % count: 1. B-node 2. P-node 4. M-node 8. H-node This command is used to configure primary WINS server. msubnet primWINS [2/3/4/5/6] [WINS IP] Parameter Description 2/3/4/5/6 It means LAN interface. 2=LAN2 3=LAN3 Vigor3220 Series User’s Guide...
Page 607 > > msubnet secWINS 2 192.168.3.89 % Set LAN2 Dhcp Secondary WINS IP done !!! > msubnet secWINS ? % msubnet secWINS <2/3/4/5/6> <WINS IP> % Now: LAN2 192.168.3.89; LAN3 0.0.0.0; LAN4 0.0.0.0; LAN5 0.0.0.0; LAN6 0.0.0.0 Vigor3220 Series User’s Guide...
Page 608 LAN4 LAN5 LAN6 This command allows you to configure MTU value for LAN/DMZ/IP Routed Subnet. msubnet mtu [interface][value] Parameter Description interface Available settings include LAN1~LAN6, IP_Routed_Subnet, and DMZ. value 1000 ~ 1508 (Bytes), default: 1500 (Bytes) Vigor3220 Series User’s Guide...
Page 609 It means to define a name for the IP object. NAME: Type a name with less than 15 characters. Example: object ip obj 9 -n bruce -i INTERFACE It means to define an interface for the IP object. INTERFACE=0, means any INTERFACE=1, means LAN Vigor3220 Series User’s Guide...
Page 610 It means to view the information of the specified group profile. Example: object ip grp 1 -v -n NAME It means to define a name for the IP group. NAME: Type a name with less than 15 characters. Vigor3220 Series User’s Guide...
Page 611 [6:][0] [7:][0] > object ip grp 2 -i 1 > object ip grp 2 -a 1 2 IP Group Profile 2 Name :[First] Interface:[Lan] Included ip object index: [0:][1] [1:][2] [2:][0] [3:][0] [4:][0] [5:][0] [6:][0] [7:][0] Vigor3220 Series User’s Guide...
Page 612 Type an IP address (different with START_IP) as the end IP address. > object ip obj 1 -n marketing > object ip obj 1 -a 1 192.168.1.45 > object ip obj 1 -v IP Object Profile 1 Name :[marketing] Vigor3220 Series User’s Guide...
Page 613 The IP object profiles with index number 1,2,3,4 and 5 will be group under such profile. > object ip grp 2 -n First IP Group Profile 2 Name :[First] Interface:[Any] Included ip object index: [0:][0] [1:][0] [2:][0] [3:][0] [4:][0] [5:][0] [6:][0] Vigor3220 Series User’s Guide...
Page 614 PROTOCOL =255, means TCP/UDP Other values mean other protocols. Example: object service obj 8 -i 0 It means the check action for the port setting. 0=equal(=), when the starting port and ending port values are the Vigor3220 Series User’s Guide...
Page 615 It means the index number of the specified group profile. It means to view the information of the specified group profile. Example: object service grp 1 -v -n NAME It means to define a name for the service group. Vigor3220 Series User’s Guide...
Page 616 INDEX -n NAME object kw obj INDEX -a CONTENTS Parameter Description setdefault It means to return to default settings for all profiles. show PAGE It means to show the contents of the specified profile. Vigor3220 Series User’s Guide...
Page 617 It means to view the information of the specified file extension object profile. -n NAME It means to define a name for the file extension object profile. NAME: Type a name with less than 15 characters. It means to enable the specific CATEGORY or FILE_EXTENSION. Vigor3220 Series User’s Guide...
Page 618 [ ].ocx [ ].olb [ ].ole [ ].tlb [ ].viv [ ].vrm ------------------------------------------------------------------------- ------ Compression category: [ ].ace [ ].arj [ ].bzip2 [ ].bz2 [ ].cab [ ].gz [ ].gzip [ ].rar [ ].sit [ ].zip Vigor3220 Series User’s Guide...
Page 619 > port 1 100F %Set Port 1 Force speed 100 Full duplex OK !!! This command allows you to set a time of keeping the session connection for specified protocol. portmaptime [-<command> <parameter> | ... ] Vigor3220 Series User’s Guide...
Page 620 This command allows you to view current status (interface and driver) of USB printer. prn status prn debug > prn status Interface: USB bus 2.0 Printer: NotReady > prn debug conn[0] : none conn[1] : none conn[2] : none conn[3] : none LPD_data_total=0 Vigor3220 Series User’s Guide...
Page 621 Wan 1 is XDSL model ,don,t need to set up Wan 1 is XDSL model ,don,t need to set up WAN1 class 3 ratio set to 20 WAN1 udp bandwidth control set to enable WAN1 udp bandwidth limit ratio set to 50 Vigor3220 Series User’s Guide...
Page 622 – It means Any address. Simple type “-l” to specify any address for this command. -p <DSCP id> Specify the ID. -s <Service type> Specify the service type by typing the number. The available types are listed as below: 1:ANY 2:DNS 3:FTP 4:GRE 5:H.323 Vigor3220 Series User’s Guide...
Page 623 Show the rule in the specified class. […] It means that you can type in several commands in one line. > qos class -c 2 -n draytek -a -m 1 -l 192.168.1.50:192.168.1.80 Following setting will set in the class2 class 2 name set to draytek...
Page 624 > qos type -a draytek -t 6 -p 510:1330 service name set to draytek service type set to 6:TCP Port type set to Range Service Port set to 510 ~ 1330 > This command can exit the telnet command screen.
Page 625 ******************************************************** No data entry. This command displays current status of NAT. > show nat Port Redirection Running Table: Index Protocol Public Port Private IP Private Port 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Vigor3220 Series User’s Guide...
Page 626 % Maximum Session Number: 10000 % Maximum Session Usage: 49 % Current Session Usage: 0 % Current Session Used(include waiting for free): 0 % WAN1 Current Session Usage: 0 This command displays current status of LAN and WAN connections. Vigor3220 Series User’s Guide...
Page 627 This command displays statistics for WAN interface. show statistic show statistic reset [interface] Parameter Description reset It means to reset the transmitted/received bytes to Zero. interface It means to specify WAN1 ~WAN5 (including multi-PVC) interface for displaying related statistics. Vigor3220 Series User’s Guide...
Page 628 MAC Addr It means to specify MAC Address of the host. all/ALL It means all of the MAC addresses. Vigor> ip route add 192.168.1.56 255.255.255.0 192.168.1.12 3 default Vigor> srv dhcp public status Index MAC Address Vigor3220 Series User’s Guide...
Page 629 Note: The IP Routed Subnet DNS must be the same as NAT Subnet DNS). > srv dhcp dns2 10.1.1.1 % srv dhcp dns2 <DNS IP address> % Now: 10.1.1.1 (IP Routed Subnet dns same as NAT Subnet dns) Vigor3220 Series User’s Guide...
Page 630 It means to display current gateway that you can use. Gateway IP It means to specify a gateway address used for DHCP server. > srv dhcp gateway 192.168.2.1 This setting will take effect after rebooting. Please use "sys reboot" command to reboot the router. Vigor3220 Series User’s Guide...
Page 631 1 or 2 specified here. > srv dhcp relay servip 192.168.1.46 > srv dhcp relay subnet 2 > srv dhcp relay servip ? % srv dhcp relay servip <server ip> % Now: 192.168.1.46 Vigor3220 Series User’s Guide...
Page 632 This command can display general information for the DHCP server, such as IP address, MAC address, leased time, host ID and so on. > srv dhcp status DHCP server: Relay Agent Default gateway: 192.168.1.1 Index IP Address MAC Address Leased Time HOST ID 192.168.1.113 00-05-5D-E4-D8-EE 17:20:08 A1000351 Vigor3220 Series User’s Guide...
Page 633 It means to specify a type for node. 1. B-node 2. P-node 4. M-node 8. H-node > srv dhcp nodetype 1 > srv dhcp nodetype ? %% srv dhcp nodetype <count> %% 1. B-node 2. P-node 4. M-node 8. H-node % Now: 1 Vigor3220 Series User’s Guide...
Page 634 It means to remove the IP address settings of second WINS server. > srv dhcp secWINS 192.168.1.180 > srv dhcp secWINS ? %% srv dhcp secWINS <WINS IP address> %% srv dhcp secWINS clear % Now: 192.168.1.180 Vigor3220 Series User’s Guide...
Page 635 -e [1 or 0] -c [option number] -v [option value] srv dhcp option -e [1 or 0] -c [option number] -a [option value] srv dhcp option -e [1 or 0] -c [option number] -x [option value] srv dhcp option -u [idx unmber] Vigor3220 Series User’s Guide...
Page 636 It means the index number of the option value. > srv dhcp option -e 1 -c 18 -v /path > srv dhcp option -l % state idx interface opt type data % enable 1 ALL LAN 18 ASCII /path Vigor3220 Series User’s Guide...
Page 637 The available commands with parameters are listed below. It means to enable IPSec ESP tunnel passthrough and IKE source port (500) preservation. It means to disable IPSec ESP tunnel passthrough and IKE source port (500) preservation. Vigor3220 Series User’s Guide...
Page 638 It means to return to factory settings for all the open ports profiles. > srv nat openport 1 1 -a 1 -c games -i 192.168.1.100 -w 1 -p TCP -s 23 -e 83 > srv nat openport -v Vigor3220 Series User’s Guide...
Page 639 It means to remove the selected port redirection setting. disable [idx] It means to inactivate the selected port redirection setting. enable [idx] It means to activate the selected port redirection setting. flush It means to clear all the port mapping settings. Vigor3220 Series User’s Guide...
Page 640 Protocol: 0 = Disable, 6 = TCP, 17 = UDP This command allows users to view NAT Port Redirection Running Table. > srv nat status NAT Port Redirection Running Table: Index Protocol Public Port Private IP Private Port 192.168.1.11 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 Vigor3220 Series User’s Guide...
Page 641 This command is used to obtain the TX (transmitted) or RX (received) data for each connected switch. switch -i [switch idx_no] [option] Parameter Description switch idx_no It means the index number of the switch profile. option The available commands with parameters are listed below. traffic [on/off/status/tx/rx] Vigor3220 Series User’s Guide...
Page 642 This command is used to reset the switch table and reboot the router. switch clear [idx] Parameter Description It means the index number of each item shown on the table. The range is from 1 to 8. It means to clear all of the data. Vigor3220 Series User’s Guide...
Page 643 Username – Type a new name for local user. Password – Type a password for local user. delete [INDEX] Delete a local user account. view [INDEX] Show the user account/password detail information. > > sys adminuser Local 1 Local User has enabled! Vigor3220 Series User’s Guide...
Page 644 It is used to disable/enable SSH service (0: disable, 1: enable). -p <enable> It is used to disable/enable printer service (0: disable, 1: enable). -6 <enable> It is used to disable/enable IPv6 (0: disable, 1: enable). > sys bonjour -s 1 > Vigor3220 Series User’s Guide...
Page 645 Parameter Description It means to turn on the FTP server of the system. It means to turn off the FTP server of the system. > sys ftpd on % sys ftpd turn on !!! Vigor3220 Series User’s Guide...
Page 646 Interface 4 Ethernet: Status: DOWN IP Address: 0.0.0.0 Netmask: 0x00000000 MAC: 00-50-7F-00-00-02 Interface 5 Ethernet: Status: DOWN IP Address: 0.0.0.0 Netmask: 0x00000000 MAC: 00-50-7F-00-00-03 Interface 6 Ethernet: Status: DOWN IP Address: 0.0.0.0 Netmask: 0x00000000 MAC: 00-50-7F-00-00-04 Vigor3220 Series User’s Guide...
Page 647 Interface 8 Ethernet: Status: DOWN IP Address: 0.0.0.0 Netmask: 0x00000000 MAC: 00-50-7F-00-00-06 Interface 9 Ethernet: Status: DOWN IP Address: 0.0.0.0 Netmask: 0x00000000 MAC: 00-50-7F-00-00-07 --- MORE --- ['q': Quit, 'Enter': New Lines, 'Space Bar': Next Page] > Vigor3220 Series User’s Guide...
Page 648 Description ASCII string It means the password for administrator. The maximum character that you can set is 23. > sys passwd admin123 > This command allows users to restart the router immediately. > sys reboot > Vigor3220 Series User’s Guide...
Page 649 This command can turn on TFTP server for upgrading the firmware. > sys tftpd % TFTP server enabled !!! This command can display current country code and wireless region of this device. > sys cc Country Code : 0x 0 [International] Wireless Region Code: 0x30 > Vigor3220 Series User’s Guide...
Page 650 # of lost by siganture = 0 # of lost by list = 0 This command can turn on or turn off polling buffer for the router. sys pollbuf [on] sys pollbuf [off] Parameter Description It means to turn on pulling buffer. Vigor3220 Series User’s Guide...
Page 651 [on/off] sys tr069 save sys tr069 inform [event code] sys tr069 port [port num] sys tr069 cert_auth [on/off] Parameter Description get [parm] [option] It means to get parameters for tr-069. option=<nextlevel>: only gets nextlevel for GetParameterNames. Vigor3220 Series User’s Guide...
Page 652 > sys tr069 get Int. nextlevel Total number of parameter is 24 Total content length of parameter is 915 InternetGatewayDevice.LANDeviceNumberOfEntries InternetGatewayDevice.WANDeviceNumberOfEntries InternetGatewayDevice.DeviceInfo. InternetGatewayDevice.ManagementServer. InternetGatewayDevice.Time. InternetGatewayDevice.Layer3Forwarding. InternetGatewayDevice.LANDevice. InternetGatewayDevice.WANDevice. InternetGatewayDevice.Services. InternetGatewayDevice.X_00507F_InternetAcc. InternetGatewayDevice.X_00507F_LAN. InternetGatewayDevice.X_00507F_NAT. InternetGatewayDevice.X_00507F_Firewall. InternetGatewayDevice.X_00507F_Bandwidth. InternetGatewayDevice.X_00507F_Applications. InternetGatewayDevice.X_00507F_VPN. InternetGatewayDevice.X_00507F_VoIP. InternetGatewayDevice.X_00507F_WirelessLAN. InternetGatewayDevice.X_00507F_System. InternetGatewayDevice.X_00507F_Status. InternetGatewayDevice.X_00507F_Diagnostics. Vigor3220 Series User’s Guide...
Page 653 It means the license register server setting. licera It means to erase license setting. licifno It means license and signature download interface setting. lic_wiz [set/reg/qry] It means the license wizard setting. qry: query service support status Vigor3220 Series User’s Guide...
Page 654 DRVTAPI, DRVVMMC, DRVMPS, DRVFXO, DRVHAL, PSMPHONE, PSMSUPP, PSM, FXO, PSMISDN, DTMFPSER, CALLERID (Case-Insensitive). It means the dump log buffer. > sys diag_log status Status: diag_log is Enabled. lineno : 10000. Vigor3220 Series User’s Guide...
Page 655 This command is used to display current settings for sending test mail. > testmail Send out test mail Mail Alert:[Disable] SMTP_Server:[0.0.0.0] Mail to:[] Return-Path:[] This command can close UPnP function. >upnp off UPNP say bye-bye This command can enable UPnP function. Vigor3220 Series User’s Guide...
Page 656 This command can display the information of the UPnP service. UPnP service must be enabled first. > upnp on UPNP start. > upnp service >>>>> SERVICE TABLE1 <<<<< serviceType urn:schemas-microsoft-com:service:OSInfo:1 serviceId urn:microsoft-com:serviceId:OSInfo1 SCPDURL /upnp/OSInfo.xml controlURL /OSInfo1 eventURL /OSInfoEvent1 uuid:774e9bbe-7386-4128-b627-001daa843464 >>>>> SERVICE TABLE2 <<<<< serviceType urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1 serviceId urn:upnp-org:serviceId:WANCommonIFC1 Vigor3220 Series User’s Guide...
Page 657 >>>> (2) serviceType urn:schemas-upnp-org:service:WANCommonInterfaceConfig:1 ----- Subscribtion1 ------- sid = d9cd47a5-d9c9-4d3d-8043-d03a82f27983 eventKey =1, ToSendEventKey = 1 This command can display current status of temp Virtual Server of your router. Vigor> upnp tmpvs ****************** Temp virtual server status **************** ((0)) Vigor3220 Series User’s Guide...
Page 658 Aiko Aiko 83D 3.5G BandRich Bandluxe C170 3.5G BandRich Bandluxe C270 3.5G BandRich Bandluxe C321 3.5G BandRich Bandluxe C330 3.5G BandRich Bandluxe C331 3.5G BandRich Bandluxe C502 3.5G Huawei Huawei E169u 3.5G Huawei Huawei E220 3.5G Vigor3220 Series User’s Guide...
Page 659 This command can disable vigor bridge function. > vigbrg off %Disable Vigor Bridge Function! This command can show whether the Vigor Bridge Function is enabled or disabled. > vigbrg status %Vigor Bridge Function is enable! %Wan1 management is disable! Vigor3220 Series User’s Guide...
Page 660 [list index] peerid [peerid] vpn l2lset [list index] localid [localid] vpn l2lset [list index]main [auto/proposal index] vpn l2lset [list index] aggressive [g1/g2] vpn l2lset [list index]pfs [on/off] vpn l2lset [list index] phase1[lifetime] vpn l2lset [list index] phase2[lifetime] Parameter Description Vigor3220 Series User’s Guide...
Page 661 – Enable. off – Disable. pin_secret<pin> <secret> It means to set PIN code with secret. <pin> - Type the code for authentication (e.g, 1234). <secret> - Use the 32 digit-secret number generated by mOTP in the Vigor3220 Series User’s Guide...
Page 662 This command allows users to specify a subnet selection for the specified remote dial-in VPN profile. vpn subnet [index] [1/2/3/4/5/6] Parameter Description <index> It means the index number of the VPN profile. <1/2/3/4/5/6> 1 – it means LAN1 2 – it means LAN2. Vigor3220 Series User’s Guide...
Page 663 It means the value of IPsec Pre-Shared Key. <nip> <nmask> It means the remote network IP and the mask. e.g., vpn setup 1 name1 ipsec_out 1.2.3.4 1234 192.168.1.0 255.255.255.0 For L2TP Dial-Out <index> It means the index number of the profile. Vigor3220 Series User’s Guide...
Page 664 % Remote NEtwork Mask : 255.255.255.0 > This command allows users to configure settings for LAN to LAN profile. vpn option <index> <cmd1>=<param1> [<cmd2>=<para2> | ... ] Parameter Description <index> It means the index number of the profile. Available index numbers: Vigor3220 Series User’s Guide...
Page 665 “ctype= l” means L2TP(IPSec Policy None). “ctype= l1” means L2TP(IPSec Policy Nice to Have). “ctype= l2” means L2TP(IPSec Policy Must). dialto It means Server IP/Host Name for VPN. (such as draytek.com or 123.45.67.89). ltype It means Link Type. “ltype=0” means “Disable”.
Page 666 Type “off” means any remote IP is allowed to dial in. peerid It means the peer ID for Remote VPN Gateway. Type “draytek” means the word is used as local ID. iname It means Dial-in Username. “iname=admin” means to set username as “admin”.
Page 667 It means to add a new route. It means to delete specified route. <index> It means the index number of the profile. Available index numbers: 1 ~ 32 <network ip>/<mask> Type the IP address with the network mask address. Vigor3220 Series User’s Guide...
Page 668 % Password % PPP Authentication : PAP/CHAP % VJ Compression : on % Pre-Shared Key % IPSec Security Method : AH % Schedule : 0,0,0,0 % Remote Callback : off % Provide ISDN Number : off Vigor3220 Series User’s Guide...
Page 669 Set PPTP VPN Service : On Please restart the router!! This command allows users to enable second subnet IP as VPN server IP. vpn 2ndsubnet on vpn 2ndsubnet off Parameter Description on/off It means to enable or disable second subnet. Vigor3220 Series User’s Guide...
Page 670 It means to display current setting status. default TCP maximum segment size for all the VPN connection will be set as 1360 bytes. Use it to specify the connection type and value of MSS. <connection type> 1~4 represent various type. Vigor3220 Series User’s Guide...
Page 671 # of free M-Buffer=529, minimum=529 leak=3 # of free S-Buffer=1199, minimum=1198, leak=1 # of free Msgid-Buffer=1024, minimum=1024 This command allows users to pass or block the multi-cast packet via VPN. vpn Multicast set <H2l/L2l> <index> <Block/Pass> Parameter Description Vigor3220 Series User’s Guide...
Page 672 [off] Parameter Description on/off on – the packets can pass through NAT. off – the packets cannot pass through NAT. > vpn pass2nat on % Packets would go through by NAT when VPN disconnect!! Vigor3220 Series User’s Guide...
Page 673 For PPPoE, the maximum number will be 1492. For PPTP/L2TP, the maximum number will be 1460. > wan mtu 1100 > wan mtu ? Static IP/DHCP (Max MSS: 1500) PPPoE(Max MSS: 1492) PPTP/L2TP(Max MSS: 1460) % wan ppp_mss <MSS size: 1000 ~ 1500> Vigor3220 Series User’s Guide...
Page 674 This command allows you to enable or disable the function of WAN forwarding. The packets are allowed to be transmitted between different WANs. wan forward [on] wan forward [off] Parameter Description on/off It means to enable or disable WAN forward. > wan forward ? %WAN forwarding is Disable! Vigor3220 Series User’s Guide...
Page 675 [on/off] wan modem backup_wait [value] wan modem pipe [Int][Din][Dout] wan modem wakeup [on/off/value] wan modem vid [id] wan modem pid [id] wan modem status Parameter Description init Set initial modem AT command (default value is “AT&FE0V1X1&D2&C1S0=0”). Vigor3220 Series User’s Guide...
Page 676 It means to enable ARP detection (default). always_on disable link detect, always connected(only support static IP) target It means to set the ping target. ip addr It means the IP address used for detection. Type an IP address in this field. Vigor3220 Series User’s Guide...
Page 677 It means to make WAN interface as the member of load balance. It means to cancel WAN interface as the member of load balance. > wan lb status WAN1: on WAN2: on WAN3: on WAN4: on WAN5: on WAN6: on WAN7: on Vigor3220 Series User’s Guide...
Page 678 0 0 1 1 0 0 Normal 0(OFF) > This command allows you to specify a channel (in Multi-PVC/VLAN) to make bridge connection to a specified WAN interface. wan multifno [channel #] [WAN interface #] wan multifno status Vigor3220 Series User’s Guide...
Page 679 It means to enable or disable the WAN interface for VLAN. stat It means to display the table of WAN VLAN status. > wan vlan stat %Interface Enabled %====================================== % WAN1 (ADSL) % WAN1 (VDSL) Vigor3220 Series User’s Guide...
Page 680 For example, if you type “5” (5=1+4), the system will send SMS alert when WAN shotdown is detected. status Display current configuration status of WAN budget. > wan budget wan 1 action 5 % WAN 1 budget action set to 5 Vigor3220 Series User’s Guide...
Page 681 Specify the IPv6 target to detect. It must be an IPv6 IP address. IPv6 address: Type the IPv6 address of the target. -s [base_size] Specify the size of MTU. base_size: Available setting is 1000 ~ 1500. > wan detect_mtu6 -w 2 -i 2404:6800:4008:c06::5e -s 1500 > Vigor3220 Series User’s Guide...
Page 682 > wl acl add 00-50-70-ff-12-70 Set Done !! > wl acl add 00-50-70-ff-12-70 ssid1 ssid2 isolate Set Done !! > wl acl show ----------Enable Mac Address Filter--------- ssid1: dis ssid2: dis ssid3: dis ssid4: dis ----------MAC Address Filter---------- Vigor3220 Series User’s Guide...
Page 683 It means to set the name of the SSID, hide the SSID if required. ssid_name [hidden_ssid]] ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4. ssid_name: Give a name for the specified SSID. Vigor3220 Series User’s Guide...
Page 684 % <Note> Please restart wireless after you set the parameters. > wl config security 1 wpa1x %% Configured Wlan Security Setting: % SSID1 %% Mode: wpa1x %% Wireless card must be reset for configurations to take effect Vigor3220 Series User’s Guide...
Page 685 [En] Parameter Description It means to enable or disable the function of VPN isolation. 0: diable 1: enable > wl act on % Set Wlan to Enable. This command allows users to perform AP scanning. Vigor3220 Series User’s Guide...
Page 686 This command is used to configure connection time and reconnection time for each SSID that wireless client used for accessing into Internet. wl stamgt [enable/disable] [ssid_num]. wl stamgt [show] [ssid_num]. wl stamgt set [ssid_num] [c] [r] wl stamgt reset [ssid_num]. Vigor3220 Series User’s Guide...
Page 687 It means to enable or disable the function of VPN isolation. 0: disable 1: enable > wl iso_vpn 1 on % ssid: 1 isolate vpn on :1 This command allows you to configure WPA wireless settings. wl wpa 1/2/3 Vigor3220 Series User’s Guide...
Page 688 Window-Max. Specify the value ranging from 1 to 15. Txop It means transmission opportunity. Specify the value ranging from 0 to 65535. It can restrict stations from using specific category class if it is enabled. 0: disable 1: enable Vigor3220 Series User’s Guide...
Page 689 The value you can type is 0 (for disabling) and 1 (for enabling). wl ht txpower value The value you can type ranges from 1 – 6 (level). wl ht antenna value The value you can type ranges from 0-3. 0: 2T3R 1: 2T2R 2: 1T2R Vigor3220 Series User’s Guide...
Page 690 IP addresses/Subnets will be eligible to pass through NAT and wake up the LAN client. You also need to set NAT rule for LAN client. wol up [MAC Address]/[IP Address] wol fromWan [on/off/any] wol fromWan_Setting [idx][ip address][mask] Vigor3220 Series User’s Guide...
Page 691 User name- type the user name that you want it to pass. IP_Address- type the IP address that you want it to pass. -l all Show online user. -l userl all – all of the users will be displayed on the screen. Vigor3220 Series User’s Guide...
Page 692 -q 200 It means to set data quota. e.g., -r 1000 It means to specify the data quota unit (MB/GB). e.g., -w MB It means to set schedule index. Available settings are” sch_idx1,sch_idx2,sch_idx3, and sch_idx4. Vigor3220 Series User’s Guide...
Page 693 Show NAND Flash Usage: Partition Total Used Available Use% 4194304 7920 4186384 bin_web 33554432 11869493 21684939 cfg-bak 4194304 7920 4186384 bin_web-bak 33554432 11869493 21684939 > nand bad Show NAND Flash Bad Blocks: Block Address Partition 1020 0x07f80000 unused Vigor3220 Series User’s Guide...
Page 694 It is used to copy the same parameters settings from one profile to another APM profile. It is used to delete a specified APM profile. The default (index #1) should not be deleted. reset It is used to reset to factory settings for WLAN profile. Vigor3220 Series User’s Guide...
Page 695 [show] apm cache clear Parameter Description show It means to display the information related to VigorAP registered Vigor3220. clear It means to remove the information related to VigorAP registered Vigor3220. > apm cache show Name Auth Vigor3220 Series User’s Guide...
Page 696 [9] – The ninth number means to determine the unit of traffic limit (for upload) 1 – Mbps 0 – kbps [10] – The tenth number means to determine the unit of traffic limit (for download) 1 – Mbps 0 – kbps Vigor3220 Series User’s Guide...
Page 697 1 – enable the function. Refresh Time Available values are 1, 3 or 5 (minutes). Note: To check the scanning result of AP detection, use the command of “wl scan show”. > apm napdetect set 1 1 Vigor3220 Series User’s Guide...
Page 698 -h <Subnet> [<Virtual IP>] Enable and set virtual IP to the subnet. Subnet: LAN1 to LAN8, DMZ. Virtual IP: The type format shall be “xxx.xxx.xxx.xxx”. (e.g, 192.168.1.0) For example, to enable a virtual IP to the sunet, simply type: Vigor3220 Series User’s Guide...
Page 699 : OFF [ Index | Enable | Virtual IP ] LAN1 0.0.0.0 LAN2 0.0.0.0 LAN3 0.0.0.0 LAN4 0.0.0.0 LAN5 0.0.0.0 LAN6 0.0.0.0 LAN7 0.0.0.0 LAN8 0.0.0.0 0.0.0.0 > This command is used to display HA status information. Vigor3220 Series User’s Guide...
Page 700 > ha status -m 0 [Local Router] DrayTek IPv4 : 192.168.1.1 Status State : Down Stable : ! No : ! All WANs Down - Eth Config Sync Status : Not Ready Cached Time : 0 (s) > Vigor3220 Series User’s Guide...

Draytek Vigor3220 SERIES User Manual

Part I Installation

Part II Connectivity

Part III Wireless LAN

Part IV VPN

Part V Security

Part VI Management

Part VII Others

Part VIII Troubleshooting

Appendix I: VLAN Applications on Vigor Router

Part IX Draytek Tools

Part X Telnet Commands

Quick Links

Related Manuals for Draytek Vigor3220 SERIES

Summary of Contents for Draytek Vigor3220 SERIES