Table of Contents
Advertisement
D
e
f
a
u
l
t
D
e
f
a
u
l
t
Such page allows you to choose filtering profiles including QoS, Load-Balance policy, WCF,
APP Enforcement, URL Content Filter, for data transmission via Vigor router.
Available settings are explained as follows:
Item
Filter
Sessions Control
Quality of Service
User Management
APP Enforcement
288
R
u
l
e
P
a
g
e
R
u
l
e
P
a
g
e
Description
Select Pass or Block for the packets that do not match with
the filter rules.
The number typed here is the total sessions of the packets
that do not match the filter rule configured in this page. The
default setting is 60000.
Choose one of the QoS rules to be applied as firewall rule.
For detailed information of setting QoS, please refer to the
related section later.
Such item is available only when Rule-Based is selected in
User Management>>General Setup. The general firewall
rule will be applied to the user/user group/all users
specified here.
Note: When there is no user profile or group profile existed,
Create New User or Create New Group item will appear for
you to click to create a new one.
Select an APP Enforcement profile for global IM/P2P
application blocking. If there is no profile for you to select,
please choose [Create New] from the drop down list in this
page to create a new profile. All the hosts in LAN must follow
the standard configured in the APP Enforcement profile
selected here. For detailed information, refer to the section
of APP Enforcement profile setup. For troubleshooting
needs, you can specify to record information for IM/P2P by
Vigor3220 Series User's Guide
Advertisement
Table of Contents
