Table of Contents
Advertisement
Interface
Wireless LAN
ON/OFF/WPS
Factory Reset
Console
DMZ
LAN
WAN1~WAN4
USB1~USB2
ON/OFF
4
Description
WLAN On - Press the button and release it within 2 seconds. When the
wireless function is ready, the green LED will be on.
WLAN Off - Press the button and release it within 2 seconds to turn off
the WLAN function. When the wireless function is not ready, the LED
will be off.
WPS - When WPS function is enabled by web user interface, press this
button for more than 2 seconds to wait for client's device making
network connection through WPS.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
Connecter reserved for RD debug.
Connecter for local DMZ host.
Connecters for local networked devices.
Connecter for remote networked devices.
Connecter for a USB device (for 3G/4G USB Modem or printer).
Connecter for a power adapter.
Power Switch.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
