Table of Contents
Advertisement
-V
-C <sim pin code>
-O <init string>
-T <init string2>
-D <dial string>
-v <service name>
-m <ppp username>
-o <ppp password>
-e n
-q n
-x n
-y n
-z n
-Q <mode>
-I <ping ip>
-L n
-E <sim pin code>
-G <mode>
-N <apn name>
-U n
E
x
a
m
p
l
E
x
a
m
p
>internet -M 1 -S tcom -u username -p password -a 0 -t -1 -i 0.0.0.0
WAN1 Internet Mode set to PPPoE/PPPoA
WAN1 ISP Name set to tcom
WAN1 Username set to username
WAN1 Password set successful
WAN1 PPP Authentication Type set to PAP/CHAP
WAN1 Idle timeout set to always-on
WAN1 Gateway IP set to 0.0.0.0
> internet -V
WAN1 Internet Mode:PPPoE
ISP Name: tcom
Username: username
Authentication: PAP/CHAP
Vigor3220 Series User's Guide
View Internet Access profile.
Set (PPP mode) SIM PIN code (max. 15 characters).
Set (PPP mode) Modem Initial String (max. 47 characters).
Set (PPP mode) Modem Initial String2 (max. 47 characters)
Set (PPP mode) Modem Dial String (max. 31 characters).
Set (PPP mode) Service Name (max. 23 characters).
Set (PPP mode) PPP Username (max. 63 characters).
Set (PPP mode) PPP Password (max. 62 characters).
Set (PPP mode) PPP Authentication Type.
n= 0: PAP/CHAP (default),
1: PAP Only
(PPP mode) Index(1-15) in Schedule Setup-One
(PPP mode) Index(1-15) in Schedule Setup-Two
(PPP mode) Index(1-15) in Schedule Setup-Three
(PPP mode) Index(1-15) in Schedule Setup-Four
Set (PPP mode or DHCP mode) WAN Connection Detection Mode.
<mode>
0: ARP Detect;
1: Ping Detect
Set (PPP mode or DHCP mode) WAN Connection Detection Ping IP.
<ping ip>= ppp.qqq.rrr.sss: WAN Connection Detection Ping IP
Set (PPP mode) WAN Connection Detection TTL (1-255) value.
Set (DHCP mode) SIM PIN code (max. 19 characters).
Set (DHCP mode) Network Mode.
<mode>
0: 4G/3G/2G;
1: 4G Only;
2: 3G Only;
3: 2G Only
Set (DHCP mode) APN Name (max. 47 characters)
(DHCP mode) MTU(1000-1440)
e
l
e
583
Advertisement
Table of Contents
