Table of Contents
Advertisement
Item
Enable
User Profile
Sync User Profile ....
OK
Clear
Cancel
When you finish the configuration, please click OK to save and exit this page.
160
Description
Click it to enable local 802.1X server.
At present, such feature can be used for wireless and wired
802.1x authentication.
Select All – Click it to select all of the profiles under
Available List.
Clear All – Click it to remove all of the profiles under
Authentication List.
Make the enabling/disabling setting for both Internal RADIUS
and Local 802.1X synchronize for all of the user profiles
(User Management>>User Profile).
For example, if Local 802.1x is configured as Enabled
(checked), the Internal RADIUS will be configured as Enabled
too.
If Local 802.1X is configured as Disabled (unchecked), the
Internal RADIUS will be changed as Disabled too, even if it is
enabled previously.
Click it to save the settings.
Click it to remove previous setting configuration.
Click it to give up all settings configuration.
Vigor3220 Series User's Guide
Advertisement
Table of Contents
