Draytek Vigor3220 Series User Manual page 188

Multi-wan security router

Hide thumbs Also See for Vigor3220 Series:

Table of Contents

Packet Information

Analyze how multiple packets... - Choose such mode to

make Vigor router analyze how multiple packets in a

specified file will be sent by a route policy.

Specify the nature of the packets to be analyzed by Vigor

ICMP/UDP/TCP/ANY- Specify a protocol for diagnosis.

Src IP – Type an IP address as the source IP.

Dst IP – Type an IP address as the destination IP.

Dst Port – Use the drop down list to specify the destination

Analyze – Click it to perform the job of analyzing. The

analyzed result will be shown on the page. If required, click

export analysis to export the result as a file.

Select – Click the download link to get a blank example

file. Then, click such button to select that blank ".csv" file

for saving the result of analysis.

Analyze – Click it to perform the job of analyzing. The

analyzed result will be shown on the page. If required, click

export analysis to export the result as a file.

Note that the analysis was based on the current

"load-balance/route policy" settings, we do not guarantee

it will be 100% the same as the real case.

Vigor3220 Series User's Guide