Table of Contents
Advertisement
Remote Endpoint IPv4
Address
6in4 IPv6 Address
LAN Routed Prefix
Tunnel TTL
WAN Connection
Detection
After finished the above settings, click OK to save the settings.
Below shows an example for successful IPv6 connection based on 6in4 Static Tunnel mode.
Vigor3220 Series User's Guide
Type the static IPv4 address for the remote server.
Type the static IPv6 address for IPv4 tunnel with the value
for prefix length.
Type the static IPv6 address for LAN routing with the value
for prefix length.
Type the number for the data lifetime in tunnel.
Such function allows you to verify whether network
connection is alive or not through Ping Detect.
Mode – Choose Always On or Ping Detect for the system to
execute for WAN detection. Always On means no detection
will be executed. The network connection will be on always.
Ping IP/Hostname – If you choose Ping Detect as
detection mode, you have to type IP address in this field
for pinging.
TTL (Time to Live) –If you choose Ping Detect as
detection mode, you have to type TTL value.
73
Advertisement
Table of Contents
