Draytek Vigor3220 Series User Manual page 66

Multi-wan security router

Hide thumbs Also See for Vigor3220 Series:

Table of Contents

This button will open different web page (based on Physical

Mode) to setup IPv6 Internet Access Mode for WAN interface.

If IPv6 service is active on this WAN interface, the color of

"IPv6" will become green.

This button allows you to configure DHCP client options.

DHCP packets can be processed by adding option number and

data information when such function is enabled and

Enable – Check the box to enable the function of DHCP

Option. Each DHCP option is composed by an option number

with data. For example,

Option number:100

When such function is enabled, the specified values for DHCP

option will be seen in DHCP reply packets.

Interface – Specify the WAN interface(s) that will be

overwritten by such function. WAN5 ~ WAN7 can be located

under WAN>>Multi-PVC/VLAN.

Option Number – Type a number for such function.

DataType – Choose the type (ASCII or Hex) for the data to be

Data – Type the content of the data to be processed by the

function of DHCP option.

If you choose to configure option 61 here, the detailed settings in WAN>>Interface

Access will be overwritten.

Vigor3220 Series User's Guide