Unpacking And Placing The Unit - M2TECH MARLEY User Manual

marley
DUAL-DRIVE CLASS-A HEADPHONES AMPLIFIER
REVISION P .A – OCTOBER 2013
R

1. Unpacking and Placing the Unit

Lay the box on a table and open it by separating it from the external paperwork and
removing or cutting the adhesive tape seal. The following items are included:
• one MARLEY;
• one wall wart;
• this manual.
Should one or more item be missing, please contact your dealer.
Extract the MARLEY from the foam enclosure and place it onto a stable base, far from
heat sources. Avoid full sunlight on the unit. Allow for ample room around the unit for
venting.
The MARLEY is a high bias amplifier which dissipates 30W while operating, even when
idle, thus a lot of heat is produced. It is thus necessary to guarantee adequate air
flow.
Avoid smoke, moisture, dirt and water reaching the unit.
Do not place the unit on thick carpets nor inside a box or piece of furniture, not even
close to curtains.
9
M2Tech
www.m2tech.biz
Copyright © 2013, M2Tech Srl