M2TECH MARLEY User Manual page 25

marley
DUAL-DRIVE CLASS-A HEADPHONES AMPLIFIER
REVISION P .A – OCTOBER 2013
R
The idle time after which the MARLEY switches off is set by rotating the encoder knob.
To confirm the desired auto switch-off time, push the encoder: time is stored and the
unit will revert to "idle" status.
On the other hand, if the user changes her/his minds and goes for keeping the auto
switch-off mode previously set, she/he only needs to push the button to the left of the
front panel (Figure 1, 1) or avoid doing any other action on the unit: after a few
seconds, the MARLEY automatically reverts to its "idle" status without changing the
auto switch-off time.
NOTE: To disable auto switch-off, select "DISABLED", which is one of the
values which appear on the display while rotating the encoder knob, as shown
in Figure 12.
AUTO-OFF
240MIN
Figure 11
AUTO-OFF
DISABLED
Figure 12
25
M2Tech
www.m2tech.biz
Copyright © 2013, M2Tech Srl