Firmware Revision; Switch-Off - M2TECH MARLEY User Manual

M2Tech
marley
DUAL-DRIVE CLASS-A HEADPHONES AMPLIFIER
REVISION P .A – OCTOBER 2013 www.m2tech.biz
R

6.9. Firmware Revision

The MARLEY is operated by a microcontroller. It may be useful to know the revision of
the firmware being executed by the microcontroller. To display the firmware revision,
it is necessary to push the encoder seven times in balanced mode or eight times in
dual single-ended mode: the firmware revision is then displayed as shown in Figure
14.
FIRMWARE RELEASE
1.00
Figure 14
Of course, no value can be changed when accessing this feature: firmware release
only changes when a firmware update is performed, which can only be done in
factory.
To exit this feature and revert the MARLEY in "idle" mode, the button on the left of the
front panel may be pushed (Figure 1, 1) or user should avoid doing any other action
on the unit: after a few seconds, the MARLEY automatically reverts to its "idle" status.

6.10. Switch-Off

The MARLEY may be turned off by a long push on the button on the left of the front
panel (Figure 1, 1). After a few seconds, the advice shown in Figure 15 appears.
Copyright © 2013, M2Tech Srl
27