marley
DUAL-DRIVE CLASS-A HEADPHONES AMPLIFIER
REVISION P
.A – OCTOBER 2013
R
Once the button is released, the unit switches off and may be turned on again by a
new short push on the button.
NOTE: In the "off" status, the MARLEY
s it may be considered negligible.
6.11. Notes About Menu Use
When the firmware release screen is displayed and the encoder is pushed further,
menu navigation is restarted from the first item not related to volume control, that is
from source selection. If volume setting is desired, it's then necessary to exit menu by
either pushing the button on the left of the front panel (Figure 1, 1) or avoiding
operating the unit for a while, to allow the MARLEY to automatically revert to "idle"
status.
POWERING-DOWN
RELEASE BUTTON
Figure 15
MARLEY actually draws a very low current, such a
MARLEY
MARLEY
28
M2Tech
www.m2tech.biz
Copyright © 2013, M2Tech Srl
Need help?
Do you have a question about the MARLEY and is the answer not in the manual?
Questions and answers