Table 8: Advantages and limitations of a long wire antenna and adaptor
Advantages
Quick and easy to deploy.
Large in size therefore, is more efficient
than the whip antennas.
Suitable for scanning applications.
Multifrequency operation.
End-fed broadband antenna
The end-fed broadband antenna is a multifrequency antenna that does not require tuning.
It is suitable for scanning ALE/CALM and Codan Selcall networks.
The end-fed broadband antenna is designed for deployment on the
front panel of the 2110 SSB Transceiver with the use of one support structure. The end-
fed broadband antenna is suitable for communication over short to long distances up to
5000 km (3000 mi), using frequencies of 2–30 MHz. It is restricted to a fixed site for
transmission and reception.
Table 9: Advantages and limitations of a end-fed broadband antenna
Advantages
Quick and easy to deploy.
Suitable for scanning applications.
Multifrequency operation.
Broadband dipole antenna
The broadband dipole antenna is a multifrequency antenna that does not require tuning.
It is suitable for scanning ALE/CALM and Codan Selcall networks.
The broadband dipole antenna is designed for deployment on the
front panel of the 2110 SSB Transceiver with the use of at least one support structure.
The broadband dipole antenna is suitable for communication over short to long distances
up to 5000 km (3000 mi), using frequencies of 3–30 MHz. It is restricted to a fixed site
for transmission and reception.
2110 SSB Transceiver Reference Manual
Preparing the 2110 SSB Transceiver for use
Limitations
Requires a support structure and
appropriate space, oriented correctly for
the required direction of communication.
The length of the wire may need to be
varied to tune on all frequencies.
Limitations
Requires a support structure and
appropriate space, oriented correctly for
the required direction of communication.
Due to its broadband properties, it has a
low immunity to noise.
May be inefficient on some frequencies.
connector on the
connector on the
39
Need help?
Do you have a question about the 2110 and is the answer not in the manual?