Codan 2110 Reference Manual page 71

Setting the time and date
To set the time and date:
1
1
1
1
1
Setting your station self address
NOTE
To set your station self address:
1
1
1
1
Adding/Editing an entry in the Address List or Call Book
To add or edit an address that you call frequently:
1
1
1
1
2110 SSB Transceiver Reference Manual
Hold to open Quick Start.
Scroll to Set time/date, then press
The display will appear with a line under the day of the month.
Use or to change the current setting to the correct value, then press
The line will appear under the month.
Repeat the previous step until you have made all of the changes to the time and date.
When all the changes have been made, the transceiver will return to Quick Start.
Press to close Quick Start, if required.
When Quick Start is available, any self address that you enter using this
method will replace the previous self address. If you want to enter more
than one self address, and hence disable the Quick Start features, see
page 69, Entering your station self
Hold to open Quick Start.
Scroll to Set my address, then press
Enter your station self address (maximum of 6 numeric digits for a Codan Selcall
network, and 15 upper-case/numeric digits for an ALE/CALM network), then
press .
NOTE
For help with entering text see
Press to close Quick Start, if required.
Hold to open Quick Start.
Scroll to Address/CallBk, then press
Enter the name of the station or person that you want to add to the list, or use
and to select an existing entry, then press
NOTE For help with entering text see
Scroll to the type of call that you want to make, enter the station address that you
want to call, then press
.
address.
.
page 52, Entering and editing
.
page 52, Entering and editing
.
Operating the transceiver
.
.
text.
text.
59