7.0 Maintenance and Service
Maintenance, repairs and period tests may only be carried out by persons who have the appropriate technical knowledge and are
familiar with the product. To carry out these measures the person must have the necessary test devices and original spare parts.
ATMOS recommends: Work should be carried out by an authorized ATMOS service partner. This ensures that repairs and testing
are carried out professionally, original spare parts are used and warranty claims remain unaffected.
• At least every 12 months a repeat test of the electrical safety should be performed according to IEC 62353. ATMOS
recommends an inspection according to the manufacturer's specifications.
7.1 Replacing the fuse ATMOS
S 61 Servant instruments
®
7.2 Replacing the fuse heated drawer
Remove the fuse carrier beside the On/Off switch and exchange the fuse.
7.3 Sending in the device
• Remove and properly dispose of consumables.
• Clean and disinfect the product and accessories according to the operating instructions.
• Place used accessories with the product.
• Fill in the form QD 434 „Delivery complaint / return shipment" and the respective decontamination certificate.
) This form is enclosed to each delivery and can be found at www.atmosmed.com.
• The device must be well padded and packed in suitable packaging.
• Place the form QD 434 „Delivery complaint / return shipment" and the respective decontamination certificate in an envelope.
• Affix the envelope to the outside of the package.
• Send the product to ATMOS or to your dealer.
15