Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
Rubber washer
5/8" (16mm)
for inlet hose (1)
screws (9)
(comes already
fitted)
Panel bracket (2)
& Knock-to-Pause Module (2)
(shipped fixed to product)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain
hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
2
Wire clip (2)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
Panel mounting
Toekick mounting bracket cutting
screws (12)
template (1)
(To enable a custom toekick panel to be
cut to fit the product profile dependant
on the depth of the toekick )
PARTS SUPPLIED
Clamp (1)
(for securing
Drain hose joiner)
Hexagonal
socket for feet
adjustment (2)
(long & short)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Prefinished toekick (1)
Toekick mounting bracket (1)
(A custom toekick panel of any
material with thickness 3/8"- 3/4"
(9 - 19mm) can be screwed to the
Toekick mounting bracket)
Top
mounting
brackets (2)
OPTIONAL
Edge Protector (1)
(If the services hole
is through a metal
partition, the hole must
be protected with the
Edge Protector supplied
to prevent damage to the
power cord or hoses.)
Toekick
mounting
screws (5)
2
Advertisement
