Advertisement
Drain hose
Drain hose
support (1)
joiner (1)
Phillips
38 mm
16 mm
bottom fixing
screws (7)
screws & metal
washers (2)
Panel bracket (1)
& Knock-to-Pause Module (1)
(shipped fixed to product)
If the Drain hoses supplied are not long enough to reach your services, you must use a Drain Hose Extension Kit P/N 525798 which will extend the drain
hoses by 11' 10" (3.6m). The kit is available from the nearest Fisher & Paykel Authorized Service Center, or Toll free 1.888.936.7872 or www.fisherpaykel.com
2
Wire clip (1)
(for securing
Drain hose joiner)
Rubber washer
for inlet hose (1)
(comes already
fitted)
Panel mounting
screws (6)
PARTS SUPPLIED
Clamp (1)
(for securing
Drain hose joiner)
Moisture protection
tape (1)
(to prevent moisture
damage to cabinetry)
External Venting kit (1)
Side mounting
bracket kit
(A and B) (2)
OPTIONAL
Cavity Bracket Kit (1)
Edge Protector (1)
(supplied with Tall
(If the services hole
Height Models only)
is through a metal
partition, the hole must
(fitted before installation
be protected with the
in order to conceal
Edge Protector supplied
the gap at the top of
to prevent damage to the
the cavity left after
power cord or hoses.)
installation.)
Top
mounting
brackets (2)
OPTIONAL
2
Advertisement
