Advertisement
External Venting Kit
Services can be located
either side of dishwasher
IMPORTANT!
To prevent pooling of
condensation from the
vent hose, a toekick
height of no less than 4"
(100mm) is required.
min. 4" (100mm)
Services hole
If the hole is through wood, make sure its edges are smooth and rounded.
●
If the hole is through metal, ensure you fit the supplied Edge Protector to
●
prevent damage to the power cord.
8
IMPORTANT!
To prevent pooling of
condensation from the
vent hose, a toekick
height of no less than 4"
(100mm) is required.
min. 4" (100mm)
Services hole
If the hole is through wood, make sure its edges are smooth and rounded.
●
If the hole is through metal, ensure you fit the supplied Edge Protector to
●
prevent damage to the power cord.
9
8
PREPARATION FOR EXTERNAL VENTING THROUGH SAME CABINET
VENT HOSE
ø 2 3⁄8"
(60mm)
PREPARATION FOR EXTERNAL VENTING THROUGH ADJACENT CABINET
The ø 2 3⁄8" (60mm) services
ø 2 3/8"
hole should be enlarged to
(60 mm)
accomodate the extra venting
hose by cutting out some material
from the bottom corner.
VENT HOSE +
DRAIN HOSE +
INLET HOSE
ø max. 1 1⁄2"
(38mm)
DRAIN HOSE +
INLET HOSE +
POWER CORD
ø max. 1 1⁄2"
(38mm)
ø 2 3⁄8"
POWER CORD
(60mm)
Shelf cutouts
max. 3⁄16" (5mm)
ø 2 3⁄8"
(60mm)
8 11⁄16" (220mm)
4" (100mm)
Shelf cutouts
max. 3⁄16" (5mm)
ø 2 3⁄8"
(60mm)
8 11⁄16" (220mm)
4" (100mm)
Advertisement
