!7
A
-
REMOVE PANEL BRACKET FROM PRODUCT
1
2
Remove side pins and gently
pull off the panel bracket
slightly.
1 Disconnect the Earth Wire
from the bracket
2 Unplug the knock sensor
from the controller.
!7
INSTALLING A CUSTOM FRONT DRAWER PANEL
WARNING!
Electrical Shock Hazard
Before continuing, ensure that the product is
disconnected from the power supply.
Failure to follow this warning may result in
electrical shock, injury or fire.
Side Pin
1
3
!7
B
-
REMOVE THE KNOCK-TO-PAUSE MODULE
Knock-to-Pause module
1
1
Remove the Knock-to-Pause
module from the back of the
bracket.
16