Advertisement
!5
C
-
ATTACH CUSTOM PANELS TO PANEL BRACKETS
2
IMPORTANT!
Break off and discard the tab
at the top of the Lower Panel
Bracket.
!5
INSTALLING CUSTOM FRONT DRAWER PANELS
3
There must be at least
3 screws used each side.
Align bottom of each custom
2
panel with the bottom of each
bracket.
4
!5
D
-
ATTACH KNOCK-TO-PAUSE MODULES
TO CUSTOM PANELS
1
1
IMPORTANT!
Ensure the Knock-To-Pause
●
module is orientated correctly
before attaching.
Ensure the module is centralized
●
in the holes and not in contact
with the bracket.
Attach the Knock-To-Pause
module to the back of the custom
panel through the 3 holes cut into
the panel bracket as shown.
Use all 3 screws provided.
Repeat for the other module.
5/8" (16mm)
(x3)
2
16
Advertisement
