Advertisement
Toekick Depth
NO CUTOUT
CUSTOM TOEKICK PANEL
For a Toekick Depth
1 9/16" (40mm)
Toekick mounting bracket
cutting template:
PROFILE A
CUSTOM TOEKICK PANEL
For a Toekick Depth
1 9/16" - 3 7/16"
(40mm - 88mm)
Toekick mounting bracket
cutting template:
PROFILE B
CUSTOM TOEKICK PANEL
For a Toekick Depth
3 7/16" - 3 15/16"
(88mm - 100mm)
Depth is measured from FRONT of door
panel (assuming thickness ~ 11/16" (18mm)
to front face of custom toekick label
4
After marking the panel, carefully cut or
router out the desired profile. Use the
template as a cutting guide.
IMPORTANT!
Ensure all bare edges are sealed appropriately.
!6
FITTING A CUSTOM TOEKICK PANEL
Custom Toekick Panel
1
If you require a cutout in your custom
toekick panel, choose the most
appropriate cutout profile (A or B)
depending on the final depth of your
toekick panel.
Toekick mounting bracket
m )
1 9/ 16 " (4 0m
cutting template
1
PROFILE A
4
5
Place the Toekick mounting bracket onto your
toekick panel. Ensure they are centered and
the top of the template aligns with the top
surface of the panel.
6
Secure template to panel using the supplied
toekick mounting screws.
Custom toekick panel
PROFILE B
Toekick mounting
5
bracket
6
2
Place the Toekick mounting bracket cutting
template onto your toekick panel. Ensure they
are centered and the template rests on the
top surface of the panel.
3
Secure template to panel either by clamping
or using the supplied mounting screws.
Toekick mounting bracket
cutting template
2
3
7
9
7
Slide the toekick onto the mounting rails
either side and screw the toekick onto
the bottom of tub on either side.
IMPORTANT!
Do not overtighten screw.
18
Advertisement
