Advertisement
Drain hose - 78 1/2" (2000mm)
Power cord (excl.plug) - 29 1/2" (750mm)
!0
TALL HEIGHT INTEGRATED MODELS FOR 18 7⁄8" (480MM) CAVITY ONLY - ATTACH CAVITY BRACKET
IMPORTANT!
The enclosed cavity bracket is fitted before installation in order
to conceal the gap at the top of the cavity left after installation.
1
9
MAXIMUM DISTANCE OF HOSES & CORD FROM CHASSIS EDGE
LEFT HAND SIDE
Inlet hose - 64 3/4" (1650mm)
Venting hose - 60 1/16" (1525mm)
Ensure the cavity panel bracket
is positioned so that the "F"
arrow is pointing towards the
front of the chassis.
RIGHT HAND SIDE
Drain hose - 70 1/2" (1800mm)
Inlet hose - 49" (1250mm)
Power cord (excl.plug) - 27 1/2" (700mm)
Venting hose - 75 13/16" (1925mm)
Firmly push the bracket so that
the prongs engage with the top
2
tabs and it clicks into place.
IMPORTANT!
Ensure the prongs have not
been driven down into the
chassis as this will damage
the lid below.
Ensure the top trim
seal is facing forward
after attaching the
bracket.
10
Advertisement
