General Operation; When Removing Misfed Paper - Ricoh ft5035 User Manual

DO'S AND DON'TS
Copier

General operation

When you use the bypass feed table while placing the original directly on the
exposure glass, lower the platen cover or optional document feeder before press-
ing the Start key.
Do not place sheets of paper or originals on the cover of the large capacity tray.
If you do, they might be fed when you make copies.
While copying, do not turn off the main switch.
While copying, do not open the front cover.
While copying, do not lift the platen cover, or the optional document feeder.
While copying, do not unplug the power cord.
Do not lay anything weighing more than 10 kg on the exposure glass.
Do not place tools or other hard objects on the exposure glass.
Keep corrosive liquids, such as acid, off the machine.
When adding toner
When adding toner, do not turn off the main switch. If you do, your copy settings
are cleared.
Before setting the new toner bottle, shake it well, at least 5 or 6 times.
Do not remove the inner cap of the new toner bottle.
Do not eat or swallow toner, and keep it out of reach of children.

When removing misfed paper

Do not leave any torn scraps within the machine.
When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
After clearing misfeeds, make sure that all units and levers are returned to their
original positions and all covers are closed.
156
DO'S AND DON'TS