Ricoh ft5035 User Manual page 76

The position of the margin to be erased is determined according to the selected
copy paper and reproduction ratio. Make sure to select copy paper suitable for
your original.
The width of the margin to be erased can be changed with the user tools.
page 138.
Regarding functions that cannot be used together with this function,
94.
1
Press the Erase key once to se-
lect the Erase Center, twice to
select the Erase Border, or three
times to select both of them.
2
Set your original on the exposure
glass or in the optional document
feeder.
34.
If you place a book original on the
exposure glass, the original must be
aligned to the rear left corner.
3
Press the Start key.
See page 31, 32, or
ERASING PARTS OF THE COPY IMAGE (Erase)
See
see page
73