Ricoh ft5035 User Manual page 109

B IS LIT OR BLINKING: ADDING TONER
f IS LIT OR BLINKING: ADDING TONER
When the Add Toner f indicator blinks, it is time to supply toner (copying is
still possible). When the Add Toner f indicator is continuously on, copies
cannot be made until the toner bottle is replaced.
4
WARNING: Do not incinerate the used toner or toner containers.
Toner dust might ignite when exposed to open flame.
Dispose of the used toner containers according to local
regulations for plastics.
NOTE: When adding toner, do not turn off the main switch. If you do, your copy
settings are cleared.
NOTE: Before setting the new toner bottle, shake it well at least 5 or 6 times.
NOTE: Do not remove the inner cap of the new toner bottle.
1
Open the copier's front cover.
2
You can find the sticker explain-
ing how to add toner inside the
front cover, as shown in the illus-
tration.
3
Load the new toner bottle follow-
ing the instructions on the sticker.
106