Ricoh ft5035 User Manual page 42

When The
The copier is in the Energy Saver
or Auto Off mode.
Press the Clear Modes/Energy
Saver key to return to the ready
condition.
For details about Energy Saver,
see pages 92 and 133.
For details about Auto Off,
page 134.
The following actions will also make the copier ready:
• The copier detects anyone operating it.
• Opening or closing the platen cover.
• Opening or closing the optional document feeder.
• Opening any covers.
• Setting originals in the optional document feeder.
• Opening or closing the bypass feed table.
• Setting copy paper in the bypass feed table.
• Pressing any key except the Start key.
When The Copier Is Set For User Codes
Input your user code (3 digits)
using the Number keys. Press
the Recall/Enter key.
To prevent others from making cop-
ies using your user code, press the
Clear/Stop and Clear Modes/En-
ergy Saver key simultaneously after
copying.
Regarding user codes,
142.
To set your copier for user codes,
contact your service representative.
See page 150.
r
Energy Saver Indicator Is On
see page
2
see
STARTING THE COPIER
C
3
39