Ricoh ft5035 User Manual page 136

8. Auto reset time set
As a default setting, the copier can reset itself 60 seconds after the final
copy is made, after the last time any key is pressed, or after the copier last
detects any operation. If a 60 second reset time is not appropriate, you can
change this time.
For how to change settings,
Default: 60 seconds (Setting: 60)
Setting
Auto reset is not effective when the copier is in the following conditions:
• There are copies in the unit for two-sided copying.
• There are originals in the optional document feeder.
• When the copier detects anyone operating it.
• While waiting for Auto Start.
• While accessing the user tools.
• When the
9. Auto energy saver time
With the Energy Saver function, the copier is reset and the copier uses less
electricity. The copier can be set to start the Energy Saver after the selected
time. You can select this time, or cancel Auto Energy Saver mode.
To start the Energy Saver yourself,
To stop the Energy Saver,
For how to change settings,
Default: 1 minute (Setting: 1)
Setting
120
see page 128.
0 Auto reset is turned off.
1 1 second
~ ~
999 999 seconds
u
Wait indicator is lit.
see page 39.
see page 128.
0 Auto energy saver is turned off.
1 1 minute
~ ~
120 minutes
Definition
see page 92.
Definition
USER TOOLS
133