Ricoh ft5035 User Manual page 3

• •
r
If any metal, liquid or foreign matter falls into the copier,
turn off the main switch and unplug the main power
cord. Contact your service representative. Do not keep
using the copier with a fault or defect.
• •
Ru
4
Cautions:
• •
r
When you move the copier, unplug the power cord from
the wall outlet to avoid fire or electric shock.
• •
When the copier will not be used for a long time, unplug
the power cord.
• •
t
• •
m
Keep the copier away from humidity and dust. A fire or
an electric shock might occur.
• •
Do not place the copier on an unstable or tilted surface.
If it topples over it could cause injury.
• •
Do not reuse stapled paper. Do not use aluminum foil,
carbon-containing paper or other conductive paper. Oth-
erwise, a fire might occur.
• •
o
After you move the copier, fix it with the caster fixture.
Otherwise, the copier might move or come down to
cause a personal injury.
• •
If you use this copier in a confined space, make sure
there is a continuous air turnover.
• •
n
When removing misfed paper, do not touch the fusing
section because it could be very hot.
• •
R
This copier has been tested for safety using this sup-
plier's parts and consumable. We recommend you only
use these specified supplies.
Do not insert your hands between sorter bins when
your copier is equipped with the 20-bin sorter sta-
pler. You may be injured.
When you pull out the plug from the socket, grip
the plug to avoid damaging the cord and causing
fire or electric shock.
SAFETY INFORMATION
iii