Ricoh ft5035 User Manual page 144

31. User code reset time setting
When you set user code mode, the copier can reset itself so that it cannot
be operated until a user code is input 60 seconds after the final copy is
made, after the last time any key is pressed, or after the copier last detects
anyone who operates the copier. If a 60 second reset time is not appropri-
ate, you can change this time.
For details about the user code mode,
For how to change modes,
Default: 60 seconds (Setting: 60)
Setting
see page 128.
1 1 second
~ ~
999 999 seconds
see page 142.
Definition
USER TOOLS
141