USER TOOLS
Auto energy saver is not effective when the copier is in the following conditions:
• There are copies in the unit for two-sided copying.
• There are originals in the optional document feeder.
• When the copier detects anyone operating it.
• While waiting for Auto Start.
• While a copy job is interrupting another.
• While accessing the user tools.
• While the Program indicator is lit.
• While setting the Size Magnification function.
• While setting the 10 Key Zoom function.
• When the
10. Auto off time set
The copier turns itself off after the selected time since copying is finished,
since the last time any key is pressed, or since the copier detects anyone
who operates the copier.
As a default setting, this function is turned off. To turn it on, contact your service
representative.
To exit the Auto Off,
For how to change settings,
Default: 60 minutes (Setting: 60)
Setting
Auto off is not effective when the copier is in the following conditions:
• There are copies in the unit for two-sided copying.
• There are originals in the optional document feeder.
• When the copier detects anyone operating it.
• While waiting for Auto Start.
• While a copy job is interrupting another.
• While entering the user tools.
• While the Program indicator is lit.
• While setting the Size Magnification function.
• While setting the 10 Key Zoom function.
• When the
134
u
Wait indicator is lit.
see page 39.
see page 128.
1
1 minute
~
~
999
999 minutes
u
Wait indicator is lit.
Definition