Ricoh ft5035 User Manual page 101

IF YOUR COPIER DOES NOT OPERATE AS YOU WANT
IF YOUR COPIER DOES NOT OPERATE AS
Check the followings:
Copier's condition
Nothing happens when the
main switch is turned on.
d
is lit.
f
is blinking or lit.
i
is lit.
Y
is lit.
Staples do not come out at all.
r
is lit.
98
Check the power cord. Is it properly plugged into the
outlet?
Plug it in firmly.
Load paper. See page 103.
Add toner. See page 106.
Add staples.
If you use the 20-bin multi-position sorter stapler,
see page 107.
If you use the 20-bin sorter stapler,
If you use the 10-bin sorter stapler,
Remove misfed paper.
After loading a new staple cartridge, staples might not
be ejected the first few times you try to use the stapler.
There are jammed staples in the stapler. Remove the
jammed staples.
If you use the 20-bin multi-position sorter stapler,
see page 114.
If you use the 20-bin sorter stapler,
If you use the 10-bin sorter stapler,
A few sheets might not be stapled. To correct this, try
turning over the paper stack in the 500-sheet or large
capacity tray. If there is no improvement, change to
copy paper with less curl.
Your machine is in the Energy Saver or Auto Off
condition.
Press any key except the Start key to return to the
ready condition.
YOU WANT
Action
see page 107.
see page 108.
See page 109.
see page 114.
see page 115.