Non-Recommended Paper For Paper Trays; Notes For Paper - Ricoh ft5035 User Manual

NOTE: Regarding paper sizes that can be set,
NOTE: If you want to change the paper size,

Non-recommended Paper For Paper Trays

Folded, curled, creased, or damaged paper
Torn paper
Perforated paper
Paper with conductive or low electrical resistance coating such as carbon or silver
coating
Thermal paper, art paper
Thin paper that has low stiffness

Notes For Paper

Load paper with the copy side down in the 500-sheet trays, and with the copy
side up in the large capacity tray. If copies are curled, try turning the copy paper
over in the tray. If there is no improvement, change to copy paper with less curl.
Do not use copy paper that has been already copied on.
The following types of paper cannot be fed from the paper tray. Load them in the
bypass feed table.
• OHP transparencies
• post cards
Correct curls in copy paper before loading.
Fan copy paper to get air between the sheets before loading.
d IS LIT: LOADING PAPER
See pages 47 and 49.
• adhesive labels
• special size paper
@ IS LIT: LOADING PAPER
see pages 120, 122 and 123.
see page 120.
• translucent paper
103